Longer detachable power-supply cords or extension cords are available and may
be used if care is exercised in their use. If a longer detachable power-supply
cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord should be at
least as great as the electrical rating of the appliance, and
2) The cord should be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or tripped over unintentionally.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the rst few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
BEFORE USING
1. Carefully unpack the popcorn popper and all parts. Remove all packaging materials,
including any stickers or labels.
2. Hand wash the cover and measuring scoop in warm soapy water. Rinse and dry
thoroughly. DO NOT PLACE THE COVER OR MEASURING SCOOP IN THE
DISHWASHER. THE PLASTIC MATERIAL COULD DEFORM AND NOT
PROPERLY FIT THE POPPING BASE.
3. To clean the interior and exterior surfaces of the popper base, wipe and clean with a
soft dry cloth. NEVER IMMERSE THE BASE OR CORD IN WATER OR ANY OTHER
LIQUID.
4. Position the popcorn popper on a dry, level, heat-resistant surface.
5. It is recommended to operate this appliance on a separate outlet and circuit from other
appliances to avoid overloading the circuit.
HOW TO USE
1. Remove the upper cover and measuring scoop from the popcorn popper.
2. Fill the popping reservoir with kernels. Do not pack kernels tightly.
Do not use more than 1½ scoops, or less than
1 scoop of kernels or fill past the MAX marking in
the reservoir (See Fig. 1, indicator 2). If the popper is
overlled, this could result in overheating, smoking,
scorched kernels or corn, or other failure.
3. Place the upper cover on the popper base, using care
to align the cover in the groove and seating it properly
(See Fig. 1, indicator 1).
4. Replace the measuring scoop on the upper cover.
NEVER POP CORN WITHOUT THE UPPER COVER
AND MEASURING SCOOP PROPERLY IN PLACE.
Fig. 1:
3