1
Model No : ADE-WNL1
Mini Wireless Laser Mouse
User’s Quick Guide
ADE-WNL1
Mini Wireless Laser Mouse
Quick Start Guide
© 2005 All Rights Reserved. The copyright is the property of its respective owners.
2
CE Declaration Of Conformity
Hereby, the manufacturer, declares that this Wireless Optical Mouse is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
Essential requirements - Article 3
Protection requirements for health and safety - Article 3.1a
--Testing for electric safety according to EN 60950 has been conducted. These are
considered relevant and sufficient.
Protection requirements for electromagnetic compatibility -Article 3.1b
--Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-03
has been conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum -Article 3.2
--Testing for radio test suites according to EN 300 220-3 has been conducted. These are
considered relevant and sufficient.
CAUTION: The batteries may explode or leak if they are improperly recharged, inserted,
disposed in fire or mixed with used or different battery types.
Please carefully read the Quick Start Guide to learn about the
installation and the powerful functions of your Wireless Optical
Mouse.
Contents of the Package
9 Wireless Laser Mouse
9 Receiver (UP Combo)
9 USB to PS2 adaptor.
9 Two AAA Batteries
9 Quick Start Guide
Install Hardware
Note:
- If you are running Windows 98 and plug the connector into the
computer, you may find a pop-up window that requires to insert
the Windows 98 CD. Please follow the window instruction to
install the required driver.
z Install Receiver
1) PS/2 Version: Please turn off the computer. Plug the PS/2
connector of the receiver to the computer.
2) USB Version: You may turn on the computer. Plug the USB
connector of the receiver to the computer.
3) USB to PS/2 Version: Turn off the computer. Plug the adapter
of the USB to PS/2 to the receiver USB connector and then
connect to the computer.
3
z Link Mouse with Receiver
1) Turn on the computer. The LED indicator on the receiver will
light up.
2) Press the ID Link Button on the receiver and the LED indicator
will blink. The receiver is ready to automatically link with the
mouse.
3) Press the ID Link Button on the back of the mouse. The
indicator will stay lit while finishing the link.
4) The LED indicator will blink when you move the mouse.
5) If the selected channel is interfered by other wireless-mouse
users nearby, please change the Link ID by re-linkage or select
the other channel immediately.
6) If you need to re-link the mouse or after changing the mouse
batteries, please repeat the above linkage step 1~3.
7) There are 256 Link IDs per channel.
4
For advice on getting your product up and running, we offer an installation
and set-u service on our software helpline:
0906 559 7897 (UK customers only)
Calls changed at £1 per minute, maximum call duration-20 minutes. Open
24 hours, 7days a week, 365 days. You will not be charged for any queuing
time on this line, you will simply hear the phone ring until one for our
advisers is available to deal with you query.
This symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of its life separately
from your household waste. There are separate collection systems for
recycling in the EU. For more information, please contact the local authority
or your retailer where you purchased the product.
-
1
-
2
-
3
-
4
