Eneo VKC-1425 Installation And Operating Instructions Manual

Brand: Eneo

Model: VKC-1425

Category: Security cameras

Type: Installation And Operating Instructions Manual

Installation and Operating Instructions

1/4” Camera, Day & Night, 23x Zoom

VKC-1425

Contents

1. Safety Instructions ......................................................................4

2. General Description ....................................................................

3. Rear View and Part Names .........................................................

4. Installation .................................................................................9

4.1 Connecting a Monitor ........................................................9

4.2 Connecting to Power .......................................................10

4.3 Camera Control Methods .................................................11

5. Communication Protocol ...........................................................

5.1 PELCO-D Byte Format ......................................................14

5.2 PELCO-P Byte Format ......................................................16

6. On-Screen Display ....................................................................

6.1 Explanation of the On-Screen Display ..............................17

7. Menu and Operation .................................................................

7.1 How to Set Up Functions..................................................20

7.2 Main Menu – FOCUS .......................................................22

7.3 Main Menu – EXPOSURE .................................................24

7.4 Main Menu – DAY/NIGHT (optional) ..................................26

7.5 Main Menu – BLC ............................................................27

7.6 Main Menu – WHITE BAL .................................................28

7.7 Main Menu – 3D-DNR .....................................................29

7.8 Main Menu – SPECIAL .....................................................30

7.9 Main Menu – GENERAL ...................................................35

7.10 Main Menu – INITIAL .......................................................38

7.11 Main Menu – EXIT ...........................................................39

Betriebsanleitung

Installation and Operating Instructions

Mode d’emploi

Instrukcja instalacji i obsługi

www.videor.com

www.eneo-security.com

⇒

8. Speciﬁcations ...........................................................................40

9. Dimensional Drawings ..............................................................

1. Safety Instructions

• Read these safety instructions and the operation manual ﬁrst

before you install and commission the camera.

• Keep the manual in a safe place for later reference.

• Protect your camera from contamination with water and humidity

to prevent it from permanent damage.

Never switch the camera on when it gets wet. Have it checked at

an authorized service center in this case.

• Never operate the camera outside of the speciﬁcations as this

may prevent the camera functioning.

• Do not operate the cameras beyond their speciﬁed temperature,

humidity or power ratings.

Operate the camera only at a temperature range of -10°C to

+50°C and at a humidity of max. 90%.

• To disconnect the power cord of the unit, pull it out by the plug.

Never pull the cord itself.

• Pay attention when laying the connection cable and observe that

the cable is not subject to heavy loads, kinks, or damage and no

moisture can get in.

• The warranty becomes void if repairs are undertaken by

unauthorized persons. Do not open the camera housing.

• Never point the camera towards the sun with the aperture open.

This can destroy the sensor.

• Installation, maintenance and repair have to be carried out only by

authorized service centers.

Before opening the cover disconnect the unit from mains input.

• The ﬁtter is responsible for the system of protection being

followed in accordance with the technical data, e.g. by sealing of

the cable outlet with silicone.

• Contact your local dealer in case of malfunction.

• Only use original parts and original accessories from

Videor E. Hartig GmbH.

• Do not use strong or abrasive detergents when cleaning the

dome. Use a dry cloth to clean the surface.

In case the dirt is hard to remove, use a mild detergent and wipe

gently.

• During assembly, care must be taken to ensure that existing

seals are correctly inserted and are not displaced as a result

of assembly.

You must not continue to use damaged seals.

NOTE: This is a class A digital device. This digital device can

cause harmful interference in a residential area;

in this case the user may be required to take

appropriate corrective action at his/her own expense.

2. General Description

• High Resolution Day&Night Camera

• Integrated 23x AF lens / 10x digital zoom

• True day&night mode with IR cut ﬁlter

• Adjustable video transmission distance (3 steps)

• Powerful digital noise reduction (3D DNR)

• Motion detection (MD)

• Low speed shutter control (DSS)

• Digital effects: H/V reverse, 180° rotate

• Privacy masking

• On-screen menu control (OSD)

• RS-485 serial interface (Pelco P & D)

Parts supplied

• Camera

• Camera socket with 4 screws

• Installation and Operating Instructions

3. Rear View and Part Names

(5) Power Input Terminal

(2) Video Out Jack

(3) Power LED

(4) Selection Switch

(6) Control Terminal

(1) Function Setup

Button

1. Function Setup Button

Functions can be setup using 5 buttons on the camera’s rear panel.

2. VIDEO OUT Jack

Used to connect an external video monitor in jack

3. Power LED

The LED turns on when power is supplied.

• MENU Buttons: Used to access menu

mode. Also used to escape menu mode.

• TELE/WIDE Buttons: Used to choose

the desired menu item.

It also moves the cursor up or down in

the menu screen.

• NEAR/FAR Buttons: Used to change

the parameter of the selected menu

item. It also moves the cursor the left

of right in the menu screen.

4. Selection Switch

When the distance is far from camera to monitor, set „Selection

Switch” in 2 or 3. It shows more clear video on the monitor.

5. POWER Input Terminal

6. Control Terminal

• D&N IN: It is the function that can turn on external D&N mode

is set „EXT D&N” on the OSD menu of the camera.

D&N IN

GND

EXT Type

Open contact: Day

Close contact: Night

MD OUT

GND

+5V

+5V 10mA: Motion on

0V: Motion off

• MD OUT: It is the function that can turn on DVR recorder when

MD mode is set „ON” on the OSD menu of the camera.

• Connect the camera after switching off each piece of equipment.

• Change the 75ohms/Hi-Z conversation switch of each piece of

equipment according to the following diagram - move the switch

of the intermediate monitor to Hi-Z, and the end equipment to

75ohms.

4. Installation

4.1 Connecting a Monitor

Connect the video out jack on the back of the product to the monitor

Monitor

Camera

Intermediate

Video receiver

End Equipment

Camera

• As voltage may drop according to the length of electric cord,

a camera may malfunction if too long output line of adaptor

is connected to the camera.

• Voltage for camera operation: 12VDC ±10%

4.2 Connecting to Power

• The wire is polarized. Be careful of polarity.

• Use 12VDC

power source.

PTZ Controller

4.3 Camera Control Methods

Remote control using for PTZ controller

Remote control using for RS-485

Pelco-D Keyboard

DVR System

Signal (RS-485)

• Keyboard (Pelco-D, Pelco-P)

• DVR

Serial Cable

Camera RS-485 Converter

DVR - Connect to Serial PORT

(COM1 or COM2)

Pelco-D Keyboard

5. Communication Protocol

5.1 PELCO-D Byte Format

-RS-485, 9600bps, 1 start bit, 8 data bits, 1 stop bit, no parity

• Command Message

Function Zoom Tele