VTech gz5838 Install Manual

Removable handset bracket and telephone base plate

for model gz5838

To remove the handset bracket:

To install a new handset bracket:

To remove the telephone base plate:

To install a new telephone base plate:

2. Press and slide it downward

to the bottom of the handset.

3. Remove the bracket by

pulling it out.

1. Hold the two sides of

the handset bracket.

3. Press the bracket on both

sides towards the center

of the handset until all tabs

are clicked securely

into place.

1. Align the two sides of the

bracket and push it upward to

the top of the handset.

2. Lift up the telephone base plate away from

the slots on the telephone base.

1. Insert your thumb into the slot at the

back of the telephone base.

1. Align the tabs on the back of the new

telephone base plate into the slots on the

telephone base and push downward until

they click into place.

2. Push the center part

in towards the bottom

of the handset until it

clicks into place.