Alarm Lock Trilogy PDK3000 Series Installation guide

Trilogy PDK3000 Series
Alarm Lock
Brand
Alarm Lock
Model
Trilogy PDK3000 Series
Type
Installation guide

This manual is also suitable for

DK3000 and PDK3000 - Installation Instructions
1. Use Mounting Plate as a
template to trace and drill
four 7/32" diameter holes
for wall anchors and 1"
hole for wires.
2. Pull all existing
wires through
wall and Mount-
ing Plate.
3. Position Mounting Plate and
fasten with four wall anchor
screws. Connect wires as
necessary using wire nuts
supplied. Push wires inside.
4. Position unit so that the
Short Plate can be placed
over the lip on the Mount-
ing Plate.
5. Press unit flush with
Mounting Plate and pull
down. Fasten with screw.
WALL INSTALLATION
Part No. WI 1130A 5/03
TECH SUPPORT: 1-800-ALA-LOCK
ALARM LOCK SYSTEMS, INC.
is a division of the
NAPCO Security Group
345 Bayview Avenue, Amityville, New York 11701 (631) 789-4871 1-800-252-5625 Fax: (631) 789-3383
©
DK3000 Remote
Access Controller
PDK3000 Remote
Access Controller
with PROX
A. Pull all existing wires
through wall Gang
Box and Mounting
Plate.
B. Position Mounting
Plate and fasten with
two flathead screws
GANG BOX INSTALLATION
Mounting Plate
Short
Plate
Lip
Lip
Screw
tab must
be inside
Screw tab
  • Page 1 1

Alarm Lock Trilogy PDK3000 Series Installation guide

Trilogy PDK3000 Series
Alarm Lock
Brand
Alarm Lock
Model
Trilogy PDK3000 Series
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents