2. Advntage Controls
  3. ABC

Advntage Controls ABC Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Advntage Controls ABC Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ABC Motorized Ball
Valve Instructions
ABC motorized ball valves powered open
by line voltage and motor-driven closed by
a built in capacitor, when power is removed
from the valves.
Plumbing Installation
• Formaximumweatherprotection,thevalve
should be mounted in a horizontal pipe run
with actuator above the ball valve.
• ABCvalvescanhavetheowpass
through in either direction.
• Astrainerupstreamisrecommendedif
installation will have high particulate to
prevent damage.
• Isolationandbypassvalvesarealso
recommended for maintenance.
Wiring
• Valveswiththe100-240VACactuator
will operate off of a line voltage within this
range.
• Linevoltageoutsideoftheratedrangewill
damage actuator.
• Blackwireconnectstoneutralandredto
hot.
• Whenlinevoltageisapplied,valvewill
open and when voltage is removed, it will
close.
Specications
Max Temp. ............................................ 140
o
F
Pressure ........................................ 0-225PSI
Valve Body .................. ChromePlatedBrass
Ball & Stem.................. ChromePlatedBrass
Seals .................................................... EPDM
Shipping Weight ....................................3 lbs
Standard Electrical ......................... 120VAC
Sizes Available .................... 1/4,1/2,3/4&1”
Max Torque .............................................2NM
Max Power ................................................ 5W
Current ............................................ 25±5mA
Cycle Time ..................................5-7seconds
Actuator Housing .................................. ABS
Rating .................................................... 1P67
Cycle Life.......................................... 80,000+
Manual Operations
The ball valves can be manually operated
with power removed from valve.
Steps:
1. Unplugvalvefrompowersource.
2. Liftthehandwheelandstarttoturn.If
there is a charge on the capacitor it will
rotate valve until fully discharged.
3. Withcapacitordischarged,rotateto
desired position.
4. Lowerhandwheel.
Warning! Manual operations with
power still connected to actuator
will cause damage.
Position Indicator
Advantage Controls
4700HaroldAbitzDr•Muskogee,OK74403
1-800-743-7431phone
•1-888-686-6212fax
www.advantagecontrols.com
Indicating
Window
Hand wheel
Positionindicator
with valve closed.
ValveshownwithOptionJconduit
!
/