Whirlpool ARZ 012/A+ Program Chart

Category
Side-by-side fridge-freezers
Type
Program Chart

This manual is also suitable for

A. Refrigerator Compartment
1. Crisper drawer
2. Shelves / Shelf area
3. LED indicators
4. Upper door tray
5. Door trays
6. Bottle rack
7. Bottle restrainer (if present)
8. Rating plate (at the side of crisper drawer)
9. Electronic control unit.
10. Fan with filter (if present), see specific
instructions for filter.
B. Freezer compartment (if present)
1. Ice cube tray (inside the compartment)
2. Freezer compartment inner door
3. Grille (inside compartment)
Note: The number of shelves and type of accessories may vary, depending on the model.
All shelves, door trays and racks are removable.
Important: Refrigerator accessories must not be washed in a dishwasher.
PRODUCT SHEET
EN
LTGB HUETCZBG PLLV RO RU SK UA
A. Display indicating the set temperature. If the
letter “F” flashes on the display, contact the
After-sales Service.
B. Stand-by “ON” button.
C. Temperature Selection Button (+3, +4, +5,
+6, +7 °C)
D. Fast Freeze button, for appliances with a
Freezer compartment (the Fast
Freeze function should be activated at least
3 hours before freezing fresh food. It
deactivates automatically after 26 hours).
Fast Cool button, for appliances without
a Freezer compartment (the function
deactivates automatically after approx.
6 hours).
E. The LED stays on while the Fast Freeze
function (or Fast Cool) is active.
F. Button for muting the acoustic alarm (the
alarm sounds if the door is left open for
more than two minutes)
G. The red LED flashes when the door open
alarm is activated
H. “Child Lock”: to activate the function
press button for 3 seconds and the led
“I” confirm the activation for few seconds.
This prevents other people (e.g. children)
from changing the temperature or selected
functions. To deactivate the “Child Lock”
function repeat the same procedure.
CONTROL PANEL DESCRIPTION
B
C
D
F
H
E
A
G
I
L
Enables the appliance to rapidly reach optimal storage conditions in terms of internal temperature
and humidity.
In order to function correctly, the fan must also be turned on.
LTGB HUETCZBG PLLV RO RU SK UA
The fan is pre-set to ON.
You can turn the fan on/off by pressing the buttons “C” and “H” at the same time for 3 seconds.
“E” fan symbol indicates that the function is on.
If the ambient temperature exceeds 27°C, or if drops of water are present on the glass shelves, it
is essential that the fan is on to ensure the proper preservation of the food.
Deactivation of the fan allows energy consumption to be optimised.
Note: the fan restarts automatically after a power cut or after turning off the appliance.
Do not place food in front of the air inlets.
“6th SENSE” FRESH CONTROL
FAN (IF PRESENT)
5019 300 03048/A Printed in Italy 03/16
The appliance is normally factory set for
operation at the recommended temperature of
+5°C.
To adjust the internal temperature between
+3°C and +7°C, proceed as follows:
Press button C once to adjust the internal
temperature: the digital display will show the
set temperature.
Each time the button is pressed, the
temperature setting is changed by 1°C: the
value (between +3°C and +7°C) flashes in
sequence on the display.
The temperature of the freezer compartment
(approx. -18/-24 °C) cannot be
selected but is automatically set.
N.B.: In the event of a power failure, selected
functions remain stored in the memory.
REFRIGERATOR COMPARTMENT
TEMPERATURE ADJUSTMENT
LTGB HUETCZBG PLLV RO RU SK UA
  • Page 1 1
  • Page 2 2
  • Page 3 3

Whirlpool ARZ 012/A+ Program Chart

Category
Side-by-side fridge-freezers
Type
Program Chart
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI