Agil Elektronik eFuse 2-200-10 is an electronic high-speed fuse for DC voltage input up to 200 VDC. Currents up to 10 A can be switched off by this device. The maximum current before switch off can be adjusted either with the device directly or by adjustment with a serial interface. Due to the fast switch-off, damages to probes and devices under test caused by too much energy, which is typically stored in the output capacitors of a laboratory power supply, can be effectively avoided.
Agil Elektronik eFuse 2-200-10 is an electronic high-speed fuse for DC voltage input up to 200 VDC. Currents up to 10 A can be switched off by this device. The maximum current before switch off can be adjusted either with the device directly or by adjustment with a serial interface. Due to the fast switch-off, damages to probes and devices under test caused by too much energy, which is typically stored in the output capacitors of a laboratory power supply, can be effectively avoided.
Agil Elektronik eFuse 2-200-10 is an electronic high-speed fuse for DC voltage input up to 200 VDC. Currents up to 10 A can be switched off by this device. The maximum current before switch off can be adjusted either with the device directly or by adjustment with a serial interface. Due to the fast switch-off, damages to probes and devices under test caused by too much energy, which is typically stored in the output capacitors of a laboratory power supply, can be effectively avoided.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI