Bauknecht GSI 4875/3 TW-IN Program Chart

Bauknecht
Brand
Bauknecht
Model
GSI 4875/3 TW-IN
Category
Dishwashers
Type
Program Chart

This manual is also suitable for

Bauknecht GSI 4875/3 TW-IN dishwasher offers a range of features to make dishwashing easier and more efficient. With its time and failure display, you can easily monitor the progress of your washing cycle and identify any issues that may arise. The water supply tap indicator reminds you to turn on the tap before starting the dishwasher, preventing any interruptions. The delayed start function allows you to set the dishwasher to start at a specific time, up to 24 hours in advance, so you can take advantage of off-peak energy rates or run the dishwasher while you're away.

Bauknecht GSI 4875/3 TW-IN dishwasher offers a range of features to make dishwashing easier and more efficient. With its time and failure display, you can easily monitor the progress of your washing cycle and identify any issues that may arise. The water supply tap indicator reminds you to turn on the tap before starting the dishwasher, preventing any interruptions. The delayed start function allows you to set the dishwasher to start at a specific time, up to 24 hours in advance, so you can take advantage of off-peak energy rates or run the dishwasher while you're away.

5019 100 90114
(We reserve the right to make technical modifications)
PROGRAMME CHART
GSI 4875 / GSF 5476
GB
1) Programme recommended when using detergents of type A (non enzyme-based detergents).
2) Programme recommended when using detergents of type B (enzyme-based detergents).
Check the programme on the energy data plate.
*) Values for normal conditions. Values may vary in relation to usage, e.g.: different loads, water temperatures, water hardness and power supply voltage.
Water supply tap indicator
Turn on the tap.
Spray Arm Block indicator
Release the lower spray arm.
Water stop indicator
“Water stop” device not working. Switch off the
dishwasher and shut off the water tap.
Rinse aid level indicator
Add rinse aid.
Salt level indicator
Add regeneration salt.
Programme progress indicator
Pre-rinse
Only lights up for programmes with prewash (the symbol
“+” in the table below indicates that detergent must be
added).
Washing
Drying
Programme end
Eco-Dry button
Drying without fans.
Half Load Button
Load the upper
or
lower rack only. This function can be
used with any programme.
Time and Failure display
Indicates the time remaining until the start of the
washing cycle, in hours.
Turns off after the programme start.
Toward the end of the programme, the display will
indicate the time remaining in minutes.
“F1”.. “F9”
Identification of faults for service
technician.
Delayed Start buttons
Start the dishwasher at the set time.
The maximum delay that can be programmed is 24
hours.
Start Button indicator lamp
Switches “on” when the dishwasher is operating.
Flashes when a fault occurs.
Switches off at the end of the programme.
On/Off button
Programme
Symbol and
temperature
Load
Crockery and cutlery
Detergent
Consumption *
Normal load
Consumption *
Half Load
Pre-rinse
(small
compartment)
Pre-rinse
(large
compartment)
Water
(Liter)
Energy
(kWh)
Time
(Min.)
Water
(Liter)
Energy
(kWh)
Time
(Min.)
Pre-rinse
Crockery to be washed later.
- - 5.0 0.02 9 4.2 0.02 9
Glasses 40° C
Lightly soiled glasses and cups.
- + 12.0 0.82 60 10.0 0.78 59
Rapid 40° C
Lightly soiled crockery with no dried-on food.
- + 13.0 0.85 30 13.0 0.75 30
Bio-Eco 50° C
Normally soiled crockery, with dried-on food.
- + 12.0 1.25 73 10.0 1.19 71
Bio-Normal 50° C
2)
Normally or heavily soiled crockery with dried-on food.
+ + 16.0 1.30 82 13.5 1.20 80
Normal 65° C
1)
Normally or heavily soiled crockery.
+ + 16.0 1.44 82 13.4 1.37 80
Intensive 70° C
Heavily soiled pans and saucepans.
+ + 21.0 1.68 93 18.0 1.57 90
E
nd
Quick Reference Guide
Also refer to the “Dishwasher Loading Instructions” which contain detailed information and useful tips.
GB
Crockery Holders:
• Lowered: cups and long-
stemmed glasses.
• Raised: plates.
Cutlery holder for long utensils:
• Raised: glass holder (gently lift up
and release).
• Lowered: large cutlery (gently lift up).
• Place knives with blades facing
downwards.
Glass holder:
• The glass holder can be moved
sideways.
• Below: small glasses.
• Above: long-stemmed glasses.
Half Load:
If only the upper rack is to be filled,
remove the cultery basket from the
lower rack and place it in the upper
one.
Height adjustment:
(The dishwasher is delivered with the
upper rack in the top position).
The rack height can also be changed
when loaded.
• To lower: pull out the two side
handles and gently lower the rack.
• To raise: pull up the two side
handles until the rack clicks into
place.
• The rack must be level on both
sides.
Lower rack
Half Load:
Loading the lower rack only:
greater washing power, especially for
plates and saucepans.
Cutlery Basket:
The cutlery basket can be removed to
increase available space.
Plate Holders:
• The plate holders may be
removed to increase available
space.
• To remove: pull the handle
upwards.
• To reposition: simply insert in the
required position (normal or
crosswise).
Daily check list
1. Arrange crockery so that items do
not touch each other.
2. Load cups at an inclination to
facilitate water circulation.
3. In general, place cutlery in the basket
with the handles positioned
downwards, but ensure that any
sharp knives and forks that might
cause injury are placed in the basket
with the handles positioned upwards.
4. Make sure the water jet can reach
all loaded items and that the spray
arms turn freely.
5. Turn on the water supply tap before
starting the dishwasher.
Important:
• Switch off the dishwasher: once
the “Start” indicator lamp has
switched off. If the dishwasher is
turned off during the washing
programme, it will start again
from the same point in the
programme when it is turned
back on.
• If a fault occurs or you wish to
change the current programme,
press the “START” button for
about 5 seconds until the Start
indicator lamp switches off! Refer
to the “Troubleshooting Guide”
in these user instructions to
remedy any problems.
• If a regeneration salt is to
be added, IMMEDIATELY
start a washing programme,
in order to eliminate any
residual salt.
• If a fault occurs or you wish to
change the current programme,
press the “START” button.
Sometimes even when the
regeneration salt container is full,
the corresponding indicator
lamp may illuminate during the
first wash cycle.
Upper rack
  • Page 1 1
  • Page 2 2

Bauknecht GSI 4875/3 TW-IN Program Chart

Bauknecht
Brand
Bauknecht
Model
GSI 4875/3 TW-IN
Category
Dishwashers
Type
Program Chart
This manual is also suitable for

Bauknecht GSI 4875/3 TW-IN dishwasher offers a range of features to make dishwashing easier and more efficient. With its time and failure display, you can easily monitor the progress of your washing cycle and identify any issues that may arise. The water supply tap indicator reminds you to turn on the tap before starting the dishwasher, preventing any interruptions. The delayed start function allows you to set the dishwasher to start at a specific time, up to 24 hours in advance, so you can take advantage of off-peak energy rates or run the dishwasher while you're away.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents