Tannoy CMS 603/CVS 6 RETROFIT ADAPTER KIT Quick start guide

Tannoy
Brand
Tannoy
Model
CMS 603/CVS 6 RETROFIT ADAPTER KIT
Type
Quick start guide

This manual is also suitable for

Tannoy CMS 603/CVS 6 RETROFIT ADAPTER KIT is a retrofit adapter kit for CMS 603 and CVS 6 ceiling loudspeakers. It is designed for use with pre-installed back cans and mounting holes, making it easy to upgrade or replace existing loudspeakers. The adapter kit includes all the necessary hardware and instructions for a quick and easy installation.

Features:

  • Retrofit adapter kit for CMS 603 and CVS 6 ceiling loudspeakers
  • For use with pre-installed back cans and mounting holes
  • Easy to install, includes all necessary hardware and instructions

Possible use cases:

  • Upgrade existing ceiling loudspeakers to improve sound quality or performance

Tannoy CMS 603/CVS 6 RETROFIT ADAPTER KIT is a retrofit adapter kit for CMS 603 and CVS 6 ceiling loudspeakers. It is designed for use with pre-installed back cans and mounting holes, making it easy to upgrade or replace existing loudspeakers. The adapter kit includes all the necessary hardware and instructions for a quick and easy installation.

Features:

  • Retrofit adapter kit for CMS 603 and CVS 6 ceiling loudspeakers
  • For use with pre-installed back cans and mounting holes
  • Easy to install, includes all necessary hardware and instructions

Possible use cases:

  • Upgrade existing ceiling loudspeakers to improve sound quality or performance
Quick Start Guide
CMS 3.0 & CVS SERIES
CMS 603/CVS 6 RETROFIT ADAPTER KIT
Retro t Adapter Kit for CMS 603 and CVS 6 Ceiling Loudspeakers
for use with Pre-Installed Back Cans and Mounting Holes
CMS 503/CVS 4 RETROFIT ADAPTER KIT
Retro t Adapter Kit for CMS 503 and CVS 4 Ceiling Loudspeakers
for use with Pre-Installed Back Cans and Mounting Holes
LEGAL DISCLAIMER
LIMITED WARRANTY
Important Safety
Instructions
Instrucciones de
seguridad
Terminals marked with
this symbol carry
electrical current of
sucient magnitude to constitute risk
of electric shock. Use only high-quality
professional speaker cables with ¼" TS
or twist-locking plugs pre-installed.
Allother installation or modication
should be performed only by
qualiedpersonnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated
dangerous voltage inside the enclosure
- voltage that may be sucient to
constitute a risk ofshock.
This symbol, wherever it
appears, alerts you to
important operating and
maintenance instructions in the
accompanying literature. Please read
themanual.
Caution
To reduce the risk of
electric shock, do not
remove the top cover (or the rear
section). No user serviceable parts inside.
Refer servicing to qualiedpersonnel.
Caution
To reduce the risk of
re or electric shock, do
not expose this appliance to rain and
moisture. Theapparatus shall not
be exposed to dripping or splashing
liquids and no objects lled with
liquids, such as vases, shall be placed
on the apparatus.
Caution
These service instructions
are for use by qualied
service personnel only. Toreduce
the risk of electric shock do not
perform any servicing other than that
contained in the operation instructions.
Repairshave to be performed by
qualied servicepersonnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus
near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat
sources such as radiators, heat registers,
stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two blades
with one wider than the other.
A grounding-type plug has two blades
and a third grounding prong. The wide
blade or the third prong are provided
for your safety. Ifthe provided plug
does not t into your outlet, consult
an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly
at plugs, convenience receptacles,
and the point where they exit from
the apparatus.
11. Use only attachments/accessories
specied by themanufacturer.
12. Use only with
the cart, stand,
tripod, bracket, or
table specied by
the manufacturer,
orsold with
the apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualied
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has beendropped.
15. The apparatus shall be connected
to a MAINS socket outlet with a
protective earthing connection.
16. Where the MAINS plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.
17. Correct disposal of
this product: This
symbol indicates that
this product must not
be disposed of with
household waste, according to the
WEEE Directive (2012/19/EU) and your
national law. This product should be
taken to a collection center licensed for
the recycling of waste electrical and
electronic equipment (EEE).
The mishandling of this type of waste
could have a possible negative impact
on the environment and human health
due to potentially hazardous
substances that are generally
associated with EEE. At the same time,
your cooperation in the correct disposal
of this product will contribute to the
ecient use of natural resources. For
more information about where you can
take your waste equipment for
recycling, please contact your local city
oce, or your household waste
collection service.
18. Do not install in a conned space,
such as a book case or similar unit.
19. Do not place naked ame
sources, such as lighted candles,
on the apparatus.
20. Please keep the environmental
aspects of battery disposal in mind.
Batteries must be disposed-of at a
battery collection point.
21. Use this apparatus in tropical
and/or moderate climates.
Music Tribe accepts no liability for
any loss which may be suered by
any person who relies either wholly
or in part upon any description,
photograph, or statement contained
herein. Technical specications,
appearances and other information
are subject to change without notice.
All trademarks are the property
of their respective owners. Midas,
Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera and
Coolaudio are trademarks or registered
trademarks of Music Tribe Global
Brands Ltd. © Music Tribe Global
Brands Ltd. 2018 All rights reserved.
For the applicable warranty terms and
conditions and additional information
regarding Music Tribe’s Limited
Warranty, please see complete details
online at musictribe.com/warranty.
Las terminales marcadas
con este símbolo
transportan corriente
eléctrica de magnitud suciente como
para constituir un riesgo de descarga
eléctrica. Utilicesolo cables de altavoz
profesionales y de alta calidad con
conectores TS de 6,3 mm o de bayoneta
prejados. Cualquier otra instalación o
modicación debe ser realizada
únicamente por un técnicocualicado.
Este símbolo, siempre que
aparece, leadvierte de la
presencia de voltaje
peligroso sin aislar dentro de la caja;
estevoltaje puede ser suciente para
constituir un riesgo dedescarga.
Este símbolo, siempre que
aparece, leadvierte sobre
instrucciones operativas y
de mantenimiento que aparecen en la
documentación adjunta. Por favor,
leaelmanual.
Atención
Para reducir el riesgo de
descarga eléctrica, no
quite la tapa (olaparte posterior).
Nohay piezas en el interior del equipo
que puedan ser reparadas por el
usuario. Sies necesario, póngase en
contacto con personal cualicado.
Atención
Para reducir el riesgo
de incendio o descarga
eléctrica, no exponga este aparato a la
lluvia, humedad o alguna otra fuente
que pueda salpicar o derramar algún
líquido sobre el aparato. Nocoloque
ningún tipo de recipiente para líquidos
sobre elaparato.
Atención
Las instrucciones
de servicio deben
llevarlas a cabo exclusivamente
personal cualicado. Paraevitar el
riesgo de una descarga eléctrica,
no realice reparaciones que no se
encuentren descritas en el manual de
operaciones. Lasreparaciones deben
ser realizadas exclusivamente por
personalcualicado.
1. Lea las instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas
las advertencias.
4. Siga todas las instrucciones.
5. No use este aparato cerca
del agua.
6. Limpie este aparato con un
paño seco.
7. No bloquee las aberturas
de ventilación. Instale el equipo
de acuerdo con las instrucciones
del fabricante.
8. No instale este equipo cerca de
fuentes de calor tales como radiadores,
acumuladores de calor, estufas u otros
aparatos (incluyendo amplicadores)
que puedan producir calor.
9. No elimine o deshabilite nunca
la conexión a tierra del aparato o del
cable de alimentación de corriente.
Unenchufe polarizado tiene dos polos,
uno de los cuales tiene un contacto
más ancho que el otro. Una clavija
con puesta a tierra dispone de tres
contactos: dos polos y la puesta a
tierra. El contacto ancho y el tercer
contacto, respectivamente, son los que
garantizan una mayor seguridad. Si el
enchufe suministrado con el equipo
no concuerda con la toma de corriente,
consulte con un electricista para
cambiar la toma de corriente obsoleta.
10. Coloque el cable de suministro de
energía de manera que no pueda ser
pisado y que esté protegido de objetos
alados. Asegúrese de que el cable de
suministro de energía esté protegido,
especialmente en la zona de la clavija y
en el punto donde sale del aparato.
11. Use únicamente los dispositivos
o accesorios especicados por
el fabricante.
12. Use
únicamente la
carretilla,
plataforma,
trípode, soporte o
mesa especicados
por el fabricante o suministrados junto
con el equipo. Altransportar el equipo,
tenga cuidado para evitar daños y
caídas al tropezar con algún obstáculo.
13. Desenchufe el equipo durante
tormentas o si no va a utilizarlo durante
un periodo largo.
14. Confíe las reparaciones
únicamente a servicios técnicos
cualicados. La unidad requiere
mantenimiento siempre que haya
sufrido algún daño, si el cable de
suministro de energía o el enchufe
presentaran daños, sehubiera
derramado un líquido o hubieran caído
objetos dentro del equipo, si el aparato
hubiera estado expuesto a la humedad
o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún
golpe o caída.
15. Al conectar la unidad a la toma de
corriente eléctrica asegúrese de que
la conexión disponga de una unión
atierra.
16. Si el enchufe o conector
de red sirve como único medio
de desconexión, éste debe ser
accesiblefácilmente.
2 3Quick Start GuideCMS 3.0 & CVS SERIES
Page is loading ...
Page is loading ...
GARANTIA LIMITADA
LEGAL RENUNCIANTE
impacto negativo no ambiente e na
saúde humana devido a substâncias
potencialmente perigosas que estão
geralmente associadas aos EEE. Ao
mesmo tempo, a sua colaboração para a
eliminação correcta deste produto irá
contribuir para a utilização eciente dos
recursos naturais. Paramais informação
acerca dos locais onde poderá deixar o
seu equipamento usado para reciclagem,
é favor contactar os serviços municipais
locais, a entidade de gestão de resíduos
ou os serviços de recolha de
resíduosdomésticos.
18. Não instale em lugares
connados, tais como estantes ou
unidades similares.
19. Não coloque fontes de
chama, tais como velas acesas,
sobre o aparelho.
20. Favor, obedecer os aspectos
ambientais de descarte de bateria.
Baterias devem ser descartadas em um
ponto de coletas de baterias.
21. Use este aparelho em climas
tropicais e/ou moderados.
O Music Tribe não se responsabiliza
por perda alguma que possa ser
sofrida por qualquer pessoa que
dependa, seja de maneira completa
ou parcial, de qualquer descrição,
fotograa, ou declaração aqui
contidas. Dados técnicos, aparências
e outras informações estão sujeitas
a modicações sem aviso prévio.
Todas as marcas são propriedade de seus
respectivos donos. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer,
Bugera e Coolaudio são marcas ou
marcas registradas do Music Tribe Global
Brands Ltd. © Music Tribe Global Brands
Ltd. 2018 Todos direitos reservados.
Para obter os termos de garantia
aplicáveis e condições e informações
adicionais a respeito da garantia
limitada do Music Tribe, favor vericar
detalhes na íntegra através do website
musictribe.com/warranty.
8 9Quick Start GuideCMS 3.0 & CVS SERIES
Introduction
Introduction
These instructions detail the components and procedures required to retrofit selected models of Tannoy CMS and CVS ceiling speakers
into pre-existing installations using competitor backcans, or with pre-existing ceiling holes that are oversized for the intended Tannoy
replacements. Use of the Retrofit Adapter
Kits allows upgrading to the improved performance of Tannoy ceiling loudspeakers without the
added costs and installation time required to replace backcans or ceiling tiles.
Kit A and Kit B Distinction
Two di erent kits are o ered. Kit A is for smaller diameter loudspeakers (CMS 5 and CVS 4), while Kit B is for larger diameter loudspeakers
(CMS 6 and CVS 6). Adapter Rings are di erent diameters, only Kit A has an Adapter Plate, and
Kit B contains an additional clamp adapter.
See the following Compatibility Matrix to determine the proper kit for your application.
Part Numbers
Kit A = 8001 8210
Kit B = 8001 8215
Compatibility Matrix
CMS 503 also applies to CVS 4
CMS 603 also applies to CVS 6
Max ceiling hole size for Kit A and B is 311 mm (12 ¼ ")
Cans
CMS 603 PI CMS 503 PI CMS 603 BM CMS 503 BM
95-8
N/A N/A N/A N/A
95-8-7
N/A Kit AN/A N/A
95-8-10
N/A Kit AN/AKit A
96-8-7
Kit BKit AKit BN/A
96-8-10
Kit BKit AKit BKit A
Q408
Kit BKit AKit BKit A
ATLAS
Cans
CMS 603 PI CMS 503 PI CMS 603 BM CMS 503 BM
CP84
N/A N/A N/A N/A
CP87
Kit BKit AN/A N/A
CP810
Kit BKit AN/AKit A
DX58
Kit BKit AN/AKit A
DX108
Kit BKit AKit BKit A
LOWELL
10 11Quick Start GuideCMS 3.0 & CVS SERIES
Kit Components and Contents
Kit Components
Adapter Ring Adapter Plate Clamp Extension Moulding
Kit A - Contents
2 x Adapter Rings
1 x Adapter Plate
3 x Clamp Extension Mouldings
Note: Screws for the adapter plate not included. Four 8/32 pan head screws are required for each loudspeaker installation.
Kit B - Contents
2 x Adapter Rings
4 x Clamp Extension Mouldings
Installation Instructions: Kit A (for TANNOY CMS 5 and CVS 4 models)
Scenario 1: Fitting TANNOY Loudspeakers into existing third-party backcans
Note: Procedure is the same for PI and BM versions, though compatibility with backcans will di er depending on model.
1. Attach Adapter Plate to back can using four type 8/32 pan head screws (not included).
2. Insert Adapter Ring into Adapter Plate as shown.
3. Bend tabs on Adapter Ring to hold in place.
4. Fit Clamp Extension Mouldings onto clamps. Move clamps back to retracted position.
5. Insert loudspeaker into backcan.
6. Turn clamp xing screws (loudspeaker front) counterclockwise to deploy clamp to
installed position. Continue turning until loudspeaker is mounted snugly against
Adapter Ring.
7. Attach loudspeaker grille.
Installation Instructions: Kit B (for Tannoy CMS 6 and CVS 6 models)
Scenario 1: Fitting TANNOY Loudspeakers into existing third-party backcans
Note: Procedure is the same for PI and BM versions, though compatibility with backcans will di er depending on model.
1. Insert Adapter Ring into back can. Bend tabs over to t snugly against inner lip of backcan.
Follow steps 4 through 7 in procedure above for Kit A, Scenario 1. Note that four Clamp Extension Mouldings are used here for the
larger loudspeakers, rather than three shown in illustrations.
Scenario 2: Fitting TANNOY BM type Loudspeakers into oversized ceiling holes
Follow steps 1 – 7 in Scenario 2 above for Kit A. Procedure is identical; the only di erence is the diameter of the Adapter Rings and
compatibility with speci c third-party backcans.
Scenario 2: Fitting TANNOY BM type Loudspeakers into oversized ceiling holes
1. Using an appropriate metal cutting tool, cut a slot across one Adapter Ring as shown.
2. Twist Adapter Ring slightly to open the gap. Insert through ceiling hole using
a corkscrew motion.
3. Place second Adapter Ring opposite the rst, inserting the tabs through the rst ring.
4. Bend tabs on both Adapter Rings across the opposing ring for
a snug t.
5. With clamps in the retracted position, insert loudspeaker through the Adapter Rings.
6. Turn clamp xing screws (loudspeaker front) counterclockwise to deploy clamp to
installed position. Continue turning until loudspeaker is mounted snugly
against Adapter Ring.
7.
Attach loudspeaker grille.
12 13Quick Start GuideCMS 3.0 & CVS SERIES
Kit A - CMS 50 3/CVS 4
Adapter Ring Adapter Plate
R2.0
ø224.9
ø188±0.3
R2.0
R2.0
2.2
AA
11.0
1.0
170.0° 22.0
4.0
ø365±0.3
ø195.0
ø285.8
ø300.0
ø4.5
Kit B - CMS 603 /CVS 6
Adapter Ring
Clamp Extension Moulding
ø365±0.5
A
A
ø292.9
ø253±0.5
R2.0
R2.0
R2.0
2.2
11.0
1.0
4.0
10.0°
22.0
SPLIT LINE
15.0
ELLIPSE
25.0
ELLIPSE
8.0
AA
2.0
10.020.0
8.1
2.0
Clamp Extension Moulding
SPLIT LINE
15.0
ELLIPSE
25.0
ELLIPSE
8.0
AA
2.0
10.020.0
8.1
2.0
14 15Quick Start GuideCMS 3.0 & CVS SERIES
Other important information
1. Register online.
Pleaseregister your new Music Tribe
equipment right after you purchase it
by visiting tannoy.com. Registeringyour
purchase using our simple online
form helps us to process your repair
claims more quickly and e ciently.
Also, read the terms and conditions
of
our warranty, ifapplicable.
2. Malfunction. Should your
Music Tribe Authorized Reseller not be
located in your vicinity, you may contact
the Music Tribe Authorized Ful ller for
your country listed under “Support” at
tannoy.com. Shouldyour country not be
listed, pleasecheck if your problem can be
dealt with by our “OnlineSupport” which
may also be found under “Support” at
tannoy.com. Alternatively, please submit
an online warranty claim at tannoy.com
BEFORE returning theproduct.
3. Power Connections.
Beforeplugging the unit into a power
socket, please make
sure you are using the
correct mains voltage for your particular
model. Faulty fuses must be replaced
with fuses of the same type and rating
withoutexception.
Important information
17Quick Start Guide
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Tannoy CMS 603/CVS 6 RETROFIT ADAPTER KIT Quick start guide

Tannoy
Brand
Tannoy
Model
CMS 603/CVS 6 RETROFIT ADAPTER KIT
Type
Quick start guide
This manual is also suitable for

Tannoy CMS 603/CVS 6 RETROFIT ADAPTER KIT is a retrofit adapter kit for CMS 603 and CVS 6 ceiling loudspeakers. It is designed for use with pre-installed back cans and mounting holes, making it easy to upgrade or replace existing loudspeakers. The adapter kit includes all the necessary hardware and instructions for a quick and easy installation.

Features:

  • Retrofit adapter kit for CMS 603 and CVS 6 ceiling loudspeakers
  • For use with pre-installed back cans and mounting holes
  • Easy to install, includes all necessary hardware and instructions

Possible use cases:

  • Upgrade existing ceiling loudspeakers to improve sound quality or performance
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents