KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 5
Version 20160725
INX2630SQB-700-2 Parts Location and Replacement
This basic guide is to show the parts location of the INX2630SQB-700-2 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For model: INX2630SQB-700-2
Overall Snapshot of INX2630SQB-700-2
1. Blower System (Manual Part #10 – See “Parts List” page on manual)
2. Controls Unit (Manual Part #16 – See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #18 – See “Parts List” page on manual)
2
1
3
3
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 2 of 5
Version 20160725
Removing the Electric Component Support
.
Figure 1 Figure 2
Figure 3
4. Electric Component Support (Manual Part #5 – See “Parts List” page on manual)
4
4
4
Warning: Loosen the screw first with a
hand tool screw driver.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 4 of 5
Version 20160725
Removing the Control Unit
Figure 1 Figure 2
Figure 3 Figure 4
7. Light Panel Support (Manual Part #17 – See “Parts List” page on manual)
Accessing the LED Light
For a more detailed guideline,
visit:
How to Replace LED Lights
3
2
2
2
2
7
7
7
Warning: For the
process above, loosen
the screw first with a
hand tool screw driver.
KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 5 of 5
Version 20160725
Removing the Blower System
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5
1. Blower System (Manual Part #10 – See “Parts List” page on manual)
1
1
Warning:
1. Loosen the screw first with a hand tool screw driver.
2. Place a support or hold the blower before removing it.
/