Naxa NDC-408 Owner's manual

Category
Dashcam
Type
Owner's manual
4K
170
Ultra
4K
I
F
Removing the Batteries
Camera On and Off
Recording & Setting Configuration
R
S
. M
your
(Max output: 1.0mAh).
button
through
You will see
. The camera is now in photo
Note: Please choose a branded Micro SD card, and then format it with the
computer before use. We suggest a high-quality SD card for the best result.
*Maximum card capacity is 64GB (Class 10 or above).
Motion
A. Verify the camera is in the playback menu.
B. Press the “UP” or “DOWN” button to select a file.
C. Press the “OK” button to play the selected video.
D. Press the “OK” button for 2 seconds, a prompt appears asking,
“Delete this file?”. You can delete files here.
the “UP”
Connection
Press “OK” to start the video. At the same time, the “red icon” will be flashing. The
high frame rate video will start recording.
Terms
“OK”
Specifications
7
NOTE:
Support
Please visit us on the web at www.naxa.com to get up to the minute news, alerts, and
documentation for your new device. For additional assistance, please contact Naxa
Technical Support at http://www.naxa.com/supportcenter/
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Naxa NDC-408 Owner's manual

Category
Dashcam
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI