Specifications
• DustPortSize.............................4"OD
• MinimumDustCollectorInletSize......... 4"
• OverallSize...........20"Dx40"Wx9
1
⁄2"H
• Weight.................................... 30LBS
Dust Collection
Connectthedowndraftsandingtabletoadustcol-
lectionsystemwitha4"dusthoseandhoseclamp,
asshowninFigure 2.
Operation
Start the dust collector and sand the workpiece on
thetable,asshowninFigure 3.
Figure 1.ModelW1733A.
Figure 2.Dustportconnectedtodust
collectionsystem.
Figure 3.Sandingonthedowndrafttable.
COPYRIGHT © JUNE, 2011 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan#14262TR
Model W1733A
Downdraft Sanding Table
Instruction Sheet
Phone#:(360)734-3482•OnlineTechSupport:tech-support@shopfox.biz•Web:www.shopfox.biz
Cleaning
Cleanthetablesurfacewithadampragorpitch/resin
remover.Beforecleaning,testaninconspicuousarea
ofthetabletoensurethattheselectedcleanerwill
notdamagethetablefinish.DONOTusebrakeparts
cleaner, acetone, harsh solvents, or gasoline—these
willruinthefinishonthetablesurface.
Customer Service
ForquestionscontactWoodstockInternationalTechnical
Supportat(360)734-3482,orsende-mailto:
tech-support@shopfox.biz.
Always wear safety glasses
and a respirator during
operation to reduce risk
of severe eye injury or
long-term respiratory
damage.