Nathan Fire R User manual

  • I have reviewed the user manual for the NATHAN Neutron Fire R headlamp. This manual provides instructions on how to operate the device, including turning it on/off, cycling through different power modes of main LED and color LED's and activating strobe. The headlamp is also IPX4 weather-resistant. It also includes information about battery replacement. I'm ready to answer your questions.
  • How do I turn on the headlamp?
    How do I cycle through main LED power modes?
    How do I activate the main LED strobe?
    How do I change colored LEDs?
    How do I turn off the headlamp?
USAGE INSTRUCTIONS
>> To turn on, press and hold power buon (1 for Color LEDs, 2 for Main LED) for
2-3 seconds.
>> Click buon 2 to cycle through main LED power modes (Low, Medium, High, Sprint).
>> Double click buon 2 to acvate strobe from any other mode. Single click to return to low mode.
>> Click buon 1 to cycle through colored LED strobe modes.
>> Double-click buon 1 to change colored LED.
>> To turn o, press and hold power buon for 2-3 seconds.
TO REPLACE BATTERIES:
1
1. Color LED Power
2. Main LED Power
2
+-
AAA
AAA +-
+-
AAA
AAA +-
Neutron Fire™ R
IPX4
Lamp Precauons
Cleaning and Drying
Weather Resistant
Disposal
Neutron Fire™ R
/