Kmart 43266548 User manual

Warning

CHOKING HAZARD, small parts. Not suitable for children under 3 years.

Adult assembly required.

Improper installation may reduce its function, and could reasonably result in the creation of the

potential hazards.

Continuous and competent supervision of children is required at all times.

Parts List

Pool (A x 1pc) Top tube (B x 4pcs) Stand tube (C x 4pcs) 3-way connector (D x 4pcs) Bottom Pad (E x 4pcs) Repair patch (F x 2pcs)

Assembly Instructions

Step 1. Spread out the Pool (A) and insert the Top tube (B) into the pool pockets at the top of the pool.

(See Fig.1).

Step 2. Connect Top tubes with 3-way connector (D) together at each corner. (See Fig.2).

Step 3. Connect Stand tubes (C) with Bottom pads (E) together, then insert into the 3-way connectors

at each corner (See Fig.3).

Fig.1 Fig.2 Fig.3

Repair Instructions

If find any sign of damaged on the pool, need use provided repair patch (F) to repair it well before using.

1. Cut to required size depending on the damaged surface.

2. Clean and dry the damaged area thoroughly at least 10 minutes.

3. Remove the vinyl patch from paper backing.

4. Press patch firmly over the area and smooth out any air bubbles.

5. You can use after 20 minutes.

Clean and Storage

1. use a damp cloth to gently clean all surfaces. Never use solvents or other chemicals that may damage

the product.

2. Store in a cool, dry place and out of children’s reach.

FOR AU/NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.

Made in China

SQUARE FIRST FRAME POOL

Key Code: 43266548