23ZERO OUTBREAK User manual

Type
User manual
TM
OUTBREAK
USER MANUAL
1
TM
OUTBREAK SETUP MANUAL
1.
3.
Lay out OUTBREAK and peg out
corners indicated below. Only anchor
pegs half way at this point.
Insert 1 x body pole over pin & rings. Attach top 2 clips only.
2. Identify poles
2
OUTBREAK SETUP MANUAL
4.
5.
Repeat step 3 for second body pole.
Attach all pole clips. Alternate from left to right to keep pole tension balanced.
Fit Ridgepole by inserting spigots into holes at peak of body poles. Tension using
trigger lock. Attach 2 x pole clips.
Anchor pegs completely.
WARNING: Cease hitting peg once peg hook reaches swag ring. Overhitting will affect
swag stitching holding pin/ring loops.
6.
3
OUTBREAK SETUP MANUAL
7.
8.
Unzip external zips on each side of the gusseted windows and peg out. Tension guy
ropes with tensioner pictured below.
Repeat for windopw other side.
Swag set up complete
4
OUTBREAK SETUP MANUAL
1.
2.
The optional ysheet has an awning on one side. Orientate this to suit.
Place ysheet over swag and attach 4 x hook & loop straps on each corner to
OUTBREAK body poles (g.1)
Attach 4 x shock cord hooks on each corner to upper side pole clip (g. 2)
OPTIONAL FLYSHEET
g. 1 g. 2
*awning poles sold seperatley
5
OUTBREAK SETUP MANUAL
3. Swag set up complete
WARRANTY
23ZERO will replace or repair any product at its discretion that is subject to faulty manufacturing
or workmanship including materials.
Exclusions
The above warranty is limited to manufacturing and materials defects. Not including damage
caused by misuse or abuse, wear and tear, condensation, extreme weather, accidents, incor-
rect set up, damage caused by mould, insects, animals or children. This also excludes broken
poles and damage caused by a jammed, snagged zipper or excessive force applied to zipper
causing failure.
Consumer rights
Our goods come with guarantees that cannot be excluded under Australian law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have goods repaired or replaced if the
goods fail to be of acceptable quality and failure does not amount to a major failure.
* Due to our policy of continual product development, the specications, colours and features
may vary.
Making a claim
To make a claim in relation to the above manufacturers warranty please ensure you retain your
sales receipt of purchase. Please email us at [email protected] with photos of the your
claim, purchase reciept and contact details. If you require additional assistance, please phone
03 9547 4691 to discuss and arrange your claim. Product subject to warranty will be sent to
23ZERO Australia, 32b Eileen St Clayton South, Victoria 3169. All freight costs associated with
return of product for assessment is payable by consumer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

23ZERO OUTBREAK User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI