lifelong LLTM09 User manual

Brand: lifelong

Model: LLTM09

Category: Treadmills

Type: User manual

The Lifelong LLTM09 treadmill offers a range of features to help you achieve your fitness goals. With a powerful 1.2 HP motor and a speed range of 1-12 km/h, it allows for both light jogging and intense running workouts. The console displays time, speed, distance, calories, and heart rate, so you can track your progress and stay motivated. The treadmill also comes with pre-set programs and a safety key for added convenience and security. Whether you're a beginner or an experienced runner, the Lifelong LLTM09 is a great choice for your home gym.

Manufactured for & Marketed by :

Lifelong Online Retail Private Limited

For queries and complaints:

please contact: [email protected]

www.lifelongindiaonline.com

FITPRO

TREADMILL

(LLTM09)

Built for Endurance. Built for India.

User Manual

INTRODUCTION:

Dear Customer,

Congratulations! We welcome you to the Lifelong family, as you welcome our

Lifelong Fit Pro Treadmill to be a part of your home.

At Lifelong, our products are carefully built for the needs of India, which is why we

have crafted a diverse range of innovative products, across a spectrum of categories

- Home, Kitchen, Grooming, Fitness, Lifestyle and Smart Home, to better help you.

We then deliver them at the best prices, enriching your everyday living.

We are sure you can't wait to start using your new Lifelong Fit Pro Treadmill.

We know we can't!

Looking forward to building our bond for life, cheers!

Thank you, Team Lifelong

LLTM09

MARKING OF PRODUCT:

3 4

TABLE OF CONTENTS:

1. .About the product

2. Marking of Product

3. Main Parameters and Parts List

4. Precautions Before Use

5. Installation Instructions

6. Operating Instructions

7. Device Maintenance

8. Running belt adjustments

9. Do’s and Don’ts

10. Troubleshoot Chart

11. Terms and Conditions

12. Warranty

Lifelong Fit Pro combines power and elegance to take your fitness journey to the

next level. It is the perfect machine for losing weight or increasing endurance.

ABOUT THE PRODUCT:

Console

Motor Cover

Knob

Side Rail

End

Running Belt

Safety key is in red

color, please find it in

the accessory bag and

put it on the area with

the yellow sticker on

the display.

5 6

• This Treadmill is for indoor usage only, avoid moisture and dust.

• Please wear suitable clothes and sneakers before exercise. It is prohibited to exercise

on the treadmill barefoot.

• Keep children away from the machine to avoid accidents.

• Avoid overloading or using it for an exceedingly long time, otherwise it could cause

damage to the motor and controller and will accelerate the deterioration of treadmill,

running belt and running board. It is advised to maintain the machine on a regular basis.

• Please maintain good ventilation while running.

• Please clamp the security lock cable on your clothing to make sure the machine stops

at emergency condition.

• If the power cord is damaged, please contact our qualified maintenance personnel for

service rather than disassembling it at your own discretion. If you feel any pain or discomfort,

please consult your physician.

• Do not use the machine when the power cord is damaged or the power plug pin is loose,

otherwise will lead to an electric shock, short circuit, or fire.

• Do not damage or bend the power cord by force or reverse it.

• Do not place heavy objects on the machine, do not clamp the power line.

• Machine should not be used by more than 1 person at the same time.

PRECAUTIONS BEFORE USE:

Main Parameters And Parts List

Packing List

Accessory Bag List

No.

1 Input power voltage

Speed

Complete machine

Supporting base

Accessory Bag

set

Functions

Inner hexagon spanner 5mm

Inner hexagon spanner 6mm

Combination wrench

Safety key

Silicone oil

User manual

MP3 cable

Screw M8*25

Screw M6*12

AC220-240V; 50-60Hz

1.0-12 Km/h

Running

HP 1.2 HP

Name

Units Qty

Qty

Parameters Name Description

7 8

When installing, simply fix all the screws first, then tighten the screws only when the

installation of the frame is done.

1. Put the machine flat on the ground. Remove the knob in the direction shown, in the

picture below. Keep the columns and console in the direction shown in the picture below.

2. Remove the preinstalled screws M8*22 on the supporting frame and then tighten the

supporting frame with screw M6*12 on the base. Use #6 hexagon wrench and screw

M6*12 to lock and fix the base (two screws for each side).

3. Hold left & right columns, use #6 hexagon wrench and screw M8*25 to lock the console

frame on the columns (Tighten all screws in above steps, and please notice not to clamp

the cable by column).

4. Use the knob in step 1 to lock the main base and columns (Rotate clockwise, please refer

to the direction marked by the arrow mark). The uneven ground may cause trouble when

rotating the knob, please lift the column slightly to the left side (as shown below).

To fold the machine easily next time, please do not rotate the knob too tightly.

INSTALLATION INSTRUCTIONS:

910

Please hold the running deck with your right hand before unfolding the treadmill and use

your left hand to remove the knob (in the counter clockwise direction), then lower the

running deck slowly and install the plum lock back. This treadmill comes with 2.5 HP

peak motor.

1. Using treadmill: Insert the power plug properly and turn on the switch (in red colour)

When the light is on, there will be a beep sound, and then the screen will light up.

2. Safety key Introduction: The treadmill can only start when the safety key is put on, in the

yellow area of the console. Clip the safety key on your clothes when using the treadmill to

prevent accidents. Put the safety key back when not using the treadmill.

5. Put the safety key in the area shown in the picture, then press the start button to start the

treadmill. (Notice: The treadmill can only start when the safety key is put on the yellow area

marked on the console.)

NOTE: please confirm that all screws are locked uniformly according to the requirements

after installation, and check that no part is left out before plugging into an outlet.

Folding Instructions (Massager for option) When the treadmill is not in use, you can lift the

running deck and then use knob to lock the running deck and base, as shown in the picture

below.

OPERATING INSTRUCTIONS:

Safety key is in red

color, please find it

in the accessory

bag and put it on

the area with the yellow

sticker on the display

11 12

Start: When the treadmill is in a standby condition, press "Start" to start the treadmill

Stop: When the treadmill is running, press "Stop" to stop the treadmill. All the data will be

cleared, and the treadmill goes to manual mode.

Program: In standby mode, press Program to change the options from manual mode to

automatic programs. Manual mode is the system default running mode.

Mode: On standby mode, press “Mode” to switch to different countdown running modes,

(time countdown running mode, distance countdown running mode and calorie countdown

running mode). When choosing any mode, speed adjustment buttons can be used to set the

value. Press "Start" to start the treadmill after setting the value.

Play/Pause: When playing music, press Play/Pause to pause the music, and press the button

again to play music again.

Volume + /-: Can be used to adjust the volume. Press Volume +/- to increase or reduce the

volume.

Speed +/ -: Can be used to adjust the speed of the treadmill.

Speed direct selection: When the treadmill starts, press 3, 6, 9 buttons to change the speed

directly.

3. Console instructions Overlay.

Speed display: Displays the current running speed value.

Time display: Displays the time of manual mode and the countdown time under automatic

modes and programs.

Distance display: Displays cumulative distance under manual mode and programs.

Displays the distance countdown in automatic mode.

Calorie display: Displays cumulative calories under manual mode and programs.

Displays the calorie countdown in automatic mode.

Heart rate display: Heart rate signal will be detected, and the screen shows the heart

rate count.

Heart rate function(optional): In case the treadmill is energized, hold the heartbeat sensor

piece for a while and the heart rate will be shown on the screen. (This data is for reference

only; it cannot be considered as medical data.)

1. Cleaning:

• Comprehensive cleaning will extend the life of the electric treadmill. Remove dust

periodically to keep the parts clean. Be sure to clean both sides of the running belt’s

exposed portion as well.

• Make sure to wear clean athletic shoes to avoid carrying the dirt onto running board

and belt.

DISPLAY FUNCTION:

DEVICE MAINTENANCE:

BUTTON INSTRUCTIONS:

(Picture A) (Picture B)

13 14

2. Running Belt Alignment:

• Put the electric treadmill flat on the ground.

• Make the treadmill run at a speed of about 6-8km/hour.

• If the running belt leans to the right, rotate the adjusting bolt to the right half a turn

clockwise, then rotate the left adjusting bolt half a turn counter clockwise. (Picture A)

• If the running belt leans to the left, rotate the left adjusting bolt half a turn clockwise,

then rotate the right adjusting bolt half a turn counter clockwise. (Picture B)

3. Silicon oil for belt’s maintainance

Step 1: Lift the running belt slightly.

Step 2: Open the silicone oil bottle, spray the silicone oil on the sides of running board,

as shown in the following figure:

RUNNING BELT ADJUSTMENTS:

When you use the treadmill for a long time, the running belt or the multi-wedge belt

becomes loose because of the abrasion. To facilitate the safe use, appropriate adjustment

is needed.

Judgement

The feeling of running with the occasional pause phenomenon, which indicates that the

treadmill belt or multi-wedge belt is a little loose then further affirmations need to be made.

• Treadmill belts should be cleaned by a damp cloth with soap. Please pay attention to avoid

spilling any liquids on the electrical components and running belt.

Note: Before cleaning or maintaining products, please ensure that the power plug of the

treadmill is pulled out. Clean the motor at least once a year.

15 16

Step 1: Remove the motor cover, make the treadmill run at a speed of 1 km/h, and then

stand on the running belt, hold the handlebar, and tread the treadmill belt slightly.

A. If the instantaneous step cannot stop the belt, then the tightness is appropriate.

B. If your instantaneous step stops the running belt, but the multi-wedge belt and front

roller are still running, it indicates that the running belt is loose and appropriate adjustments

must be made to facilitate the safe use.

C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt

stop, but the motor is still running, it indicates that the multi-wedge belt is loose and

appropriate adjustments must be made to facilitate the safe use.

Step 2: Use a wrench to adjust the screws on the motor base according to the condition.

Meanwhile, gently flip the multi-wedge belt between the motor shaft and the front roller,

if it is too loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree to

flip the belt is limited. It is appropriate to flip the multi-wedge belt by 80% after adjustment.

Please adjust the tightness of the multi-wedge belt into the state that it could be

flipped by 80%.

Step 3: Finally lock the motor base and re-install the motor cover.

DOS AND DON’TS:

- Do not use the machine in the status of a shell break in or break off (the internal structure

exposed) or under the condition wherein the welding-parts may fall off, otherwise an

accident or injury can happen.

- Don't jump up and down in the process of movement. It may cause injuries.

- Don't keep machine in or near moist area such as the bathrooms.

- Do not place the machine in direct sunlight, or elevated temperature places such as near

a stove or a heating appliance. It may cause leakage and may burst into flames.

- Don't use when the power cord is damaged or power plug pin is loose, otherwise will lead

to an electric shock, short circuit, or fire.

- Don't damage or bend the power cord by force or reverse it. Do not place heavy objects

on the machine, do not clamp the power line, otherwise will cause fire or an electric shock.

- Machine should not be used by more than 1 person at the same time. Do not go close to

the machine when it is in use. It may cause an accident or injury.

- Avoid drinking water or pouring water when machine is in operation. It may cause electric

shock and fire.

- People who do not exercise frequently should not suddenly do intense exercise.

- Do not use this machine, after eating or when tired.

15 16

TROUBLESHOOT CHART:

Error Code

Abnormal communication:

when the power is on, the

connection between lower

controller and the console is

abnormal.

Possible Cause: The communication

between the lower controller and

console is blocked, check each joint

between the controller and console,

ensure that each core is fully

plugged in. Check the connection

line, replace it if it's damaged.

E2 No signal from motor.

Possible Cause: Check the motor

cable to see whether it is connected

well or not, if not, connect the motor

wire again. Check the motor cable

to see whether it is damaged or

has a burnt smell, if yes, replace

the motor. Check the speed sensor

to see whether it is correctly

installed or damaged.

Description Solution

Error Code

Over-current protection:

In working, the lower

controller detects the

current to be over 6A for

more than 3 seconds.

Possible Cause: Overloading leads to

excessive current, and the system

stops out of self-pro tection, or some

part is stuck, causing the motor to

stop. Adjust the treadmill and restart

it. Check if there is liquid or burnt

smell while the motor is running, if

yes, replace the motor; check if the

controller has a burned smell, if yes,

replace the controller; check the

power supply voltage, if it does not

match the specifications, change into

correct voltage and test the machine

again.

Explosion-proof impact

protection: the abnormal

voltage or motor cause the

fault in circuit which drives

the motor.

No safety key. Insert the safety key in the right place.

Possible Cause: Check if the power

supply voltage is 50% lower than

normal voltage, use the correct

voltage and test the machine again

check if the controller has a burnt

smell and replace the controller;

Check if the motor cable is connected

and connect the motor wire again.

Description Solution

17 18

Terms and Conditions:

1.This warranty is void if:

a. The completely filled warranty card is not presented

at the time of servicing the product.

b. The product is not operated according to the

instructions given under the user manual.

c. Damages are caused by lightning, abnormal

voltage, water or other liquid intrusion, fire, flood,

accident, negligence or improper handling.

d. Product has been damaged due to installation,

epairs, alterations or modifications by unauthorized

service organizations or persons.

e. Product label specifying the model number, serial

number and production code has been removed

and altered.

f. Defects or parts requiring replacement due to

ordinary wear and tear, corrosion, rust or stains,

scratches, dents on the casing or paintwork of the

product.

g. Claims damaged and/or missing parts

(accessories) after 7 days from the original date of

goods received.

h. Defects or faults in product which have been used

for commercial/industrial purposes or which have

been rented/leased or have been otherwise subject

to non-household/non-domestic use.

2. Repairs or replacements will be carried out by

authorized service provider.

3. During the limited warranty period, Lifelong or its

authorized service provider will repair without charge

the defective unit inclusive of labor and parts and

restore the unit to its optimum working condition. All

defective parts used for the warranty repair should be

surrendered to Lifelong and/or its authorised servicer.

4. All expenses incurred in collecting the unit (s) or

part(s) thereof from authorised service provider as

will as any other expenses and incidentals will be

borne by the consumer.

5. Lifelong obligations are limited to the repair and

replacement of the defective product. Except as set

forth above, there are no other express or implied

warranty and all warrantied, conditions or other terms

implied by statute or common law (including any

warranty of satisfactory quality, merchantability or

fitness for a particular purpose) are excluded to the

fullest extent permitted by the lass.

6. Lifelong total liability for damages relating to or arising

out of the purchase or use of the product regardless of

the type or cause of such damage of the form of

characterization of the claim asserted (e.g. contract or

tort) shall not exceed the original purchase price paid

for the product.

7. However in no event shall Lifelong and Lifelong

authorized distributors be liable for any punitive, special

incidental, indirect or consequential losses or damages

whatsoever (including without limitation, damages for

the loss of revenue, business, profits, goodwill, or

contracts, business interruptions, loss of business

information or any other pecuniary loss.) Whether or

not Lifelong has been advised of the possibility of such

damages.These limitations shall apply not with

standing the failure of the essential purpose of any

limited warranty. This limited warranty does not affect

consumer's statutory rights under the law.

8. No carrier, dealer or employee is thereof authorized to

make modifications to this warranty and you should not

reply on any such representation. Lifelong reserves the

right to amend the terms and conditions if necessary.

Consumer Warranty Card

Dear Customer,

Thank you for choosing a Lifelong consumer product. All Lifelong Consumer

products are designed and manufactured to the highest standards to deliver high

quality performance, as well as easy installation and use. At Lifelong, we believe in

providing not only service, but adding value to your purchase. The warranty has

therefore been designed especially for you with your interest at heart.

Warranty Service

All Lifelong consumer products are covered against manufacturing defects from

them date of purchase.

Name of the product:

Model:

Warranty coverage: 1 year

Please note: Purchase receipt is necessary for warranty verification.

Customer Care: [email protected]

Customer Details

Name:

Address:

Home Number:

Office Number:

E-mail Address:

Product Details

Model No.:

Serial No.:

Purchase Date:

Invoice Number:

Online Site:

Please log on to www.lifelongindiaonline.com and complete the online warranty form with your

personal and product details within 14 days.

lifelong LLTM09 User manual

Brand: lifelong

Model: LLTM09

Category: Treadmills

Type: User manual

Download PDF

report

lifelong LLTM09 User manual

lifelong LLTM09 User manual

Related papers

Other documents