LIGHT MY BRICKS 76956 Operating instructions

LEGO T.REX BREAKOUT #76956

LIGHT KIT

INSTALLATION GUIDE

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTALLATION GUIDE 2

Light My Bricks

LEGO T.REX BREAKOUT 76956

INSTALLATION GUIDE

Hi There!

We’re here to help you get started on the LEGO

T.Rex Breakout 76956 Light Kit.

This PDF details the instructions for the LED light kit only. If

you are wishing to purchase this product, please click here

to view the product page.

If you run into any issues, please refer to the troubleshoot-

ing section towards the end of this guide.

Have fun and enjoy!

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

v

PACKAGE CONTENTS 3

PACKAGE CONTENTS: ASSORTED BRICKS:

2 x Rotating 30cm Bit Light

2 x Flashing White 30cm Bit Light

1 x White 30cm Bit Light

1 x Cool White 15cm Bit Light

1 x Cool White 30cm Large Bit Light

4 x White 15cm Bit Light

4 x Red 30cm Bit Light

3 x Warm White 30cm Micro Bit Light *

2 x 6-Port Expansion Board

1 x 8-Port Expansion Board

1 x 4-Port Micro Expansion Board

1 x Scary Effects Board

1 x Flicker Eects Board

•3 x Plate 1x2 - Light Grey

•1 x Plate 2x2 - Dark Grey

•1 x Bracket 1x1 - Light Grey

•3 x Round Plate 1x1 Open Stud - Black

•2 x Plate 1x1 Mod Rounded w Handle - Black

•2 x Round Plate 1x1 - Trans Light Blue

•2 x Round Tile 1x1 - Trans Red

•2 x Round Brick 1x1 - Trans Red

•2 x Tile 1x1 W Clip Round Edges - Black

•1 x Plate 2x2 W Rounded Bottom - Trans Clear

3 x 5cm Connecting Cable

1 x 30cm Connecting Cable

1 x 50cm Connecting Cable

1x USB Power Cable

(Power Source not Included) * Indicates components which include spares

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

CONTENTS 4

Contents

Before You Begin

Blueprint

Instructions

Final Product

Troubleshooting

Contact

5

8

10

36

37

42

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 5

Before You Begin

Laying cables in between

and underneath bricks

Cables can ﬁt in between and underneath

LEGO® bricks, plates, and tiles providing

they are laid correctly between the

LEGO® studs. Do NOT forcefully join

LEGO® together around cables; instead

ensure they are laying comfortably in

between each stud.

CAUTION: Forcing LEGO® to connect over

a cable can result in damaging the cable

and light.

Connecting Cable

Connectors To Expansion

Boards

Take extra care when inserting connectors

to ports of Expansion Boards. Connectors

can be inserted only one way. With the

expansion board facing up, look for the

soldered “=” symbol on the left side of the

port. The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into the

port. If a plug won’t ﬁt easily into a port

connector, do not force it.

Incorrectly inserting the connector can re-

sult in bent pins inside the port or possible

overheating of the expansion board when

connected.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 6

Before You Begin

Connecting Cable

Connectors To Strip Lights

Take extra care when inserting connectors

to ports on the Strip Lights. Connectors

can be inserted only one way. With the

Strip Light facing up, ensure the side of

the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into

a port connector, don’t force it. Doing so

will damage the plug and the connector.

Connecting Micro Cable

Connectors To Micro

Expansion Board Ports

Take extra care when inserting the

micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit

Lights to Micro Expansion Boards is similar

to connecting lights and cables to Strip

Lights. With the expansion board facing

up, ensure the side of the connector with

the wires exposed is facing down. If a plug

won’t ﬁt easily into a port connector, do

not force it. Use your ﬁngernail to push the

plastic part of the connector to the micro

port.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 7

Before You Begin

Installing Bit Lights Under

Lego® Bricks And Plates

When installing Bit Lights under LEGO®

pieces, ensure they are placed the correct

way up (Yellow LED component exposed).

You can either place them directly on top of

LEGO® studs or in between.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 8

BLUEPRINT

6-Port Expansion

Board

30cm

6-Port Expansion

Board

USB Power Supply

Gate Upturned Car

Rotating 30cm

Bit Light

Flashing White

30cm Bit Light

2x White 15cm

Bit Light

8-Port Expansion

Board

Scary Eects

Board

Flicker Eects

Board

2x Red 30cm

Bit Lights

2x White 15cm

Bit Lights

5cm

50cm

5cm

2x White 30cm

Micro Bit Light

4-Port Micro

Expansion Board

Cool White

Large Bit Light

2xWhite 30cm

Bit Light

Rotating 30cm

Bit Light

Flashing White

30cm Bit Light

2x Red 30cm

Bit Light

Cool White

15cm Bit Light

Car

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 9

INSTRUCTIONS

To ensure a smooth installation of

your light kit, please read and follow

each step carefully. If you run into

any issues, please refer to the online

troubleshooting guide.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 10

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

1

2

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 11

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

White 15cm Bit Light

3

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 12

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Red 30cm Bit Light

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 13

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

4

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 14

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

5

50cm Connecting Cable

6-Port Expansion Board

Hold the 50cm

Connecting Cable in

the same position as

the Left Bit Light (at

the same length).

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 15

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

6

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 16

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

7

Round Brick 1x1 - Trans Red

Round Tile 1x1 - Trans Red

Rotating Bit Light 30cm

8

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 17

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

9

Flashing White 30cm Bit Light

Round Plate 1x1 - Trans Light

Blue

Repeat step 5 to

left side pole.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 18

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

10

1x2 - Light Grey

Black Round Plate 1x1

w/ Open Stud

Cool White 30cm Large Bit Light

Black 1x1 Plate Modiﬁed Plate

Rounded w/ Handle

11

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 19

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

12

• Bck 1x1 Tie w/ Cip

Rounded Edges

• Brcke 1x1 - Ligh Gre

2x2 - Dark Grey 1x2 - Light Grey 6-Port Expansion Board

Connect the two

lights from the left

side of the fence.

LEGO T.REX BREAKOUT 76956 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 20

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

USB Power Cable

30cm Connecting Cable Pull USB Cable to

the back.

13

Twist the cables

but ensure to leave

enough slack so the

6-Port Expansion

Board can reach the

middle spotlight.

Pull all the

unconnected cables

minus the USB Power

Cable towards the

front of the set before

reconnecting the

fence .

Page is loading ...

LIGHT MY BRICKS 76956 Operating instructions

LIGHT MY BRICKS 76956 Operating instructions

Related papers

Other documents