morse 1-305-3-50-CE User manual

Brand: morse

Model: 1-305-3-50-CE

Type: User manual

This manual is also suitable for

The Specialist In Drum Handling Equipment

305 Series

AC Control Packages

[email protected] 103 Kuhn Rd.

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

CONTENTS

Page

Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2

Description. . . . . . . . . . . . . . . . . . . . . 3

Installation. . . . . . . . . . . . . . . . . . . . . . 3

Operating Instructions. . . . . . . . . . . . . . .. . . . . 3

Operator’s Manual

for Morse Control Packages

Part # CP-305-1-230

CP-305-1-220-50

CP-305-3-230

CP-305-3-230-50

CP-305-3-460

CP-305-3-400-50

CP-305-3-575

with Serial Number 300000 to ______

Receiving Procedures

Every Morse drum handler is inspected prior to shipping. However,

damage may be incurred during transit.

Check for visible damage. If you choose to accept damaged •

freight, always sign noting the damage on the Bill of

Lading.

Document the damage and have the truck driver sign. We •

recommend keeping a digital camera at your receiving dock

for this purpose.

Open packages expeditiously to check the condition of the •

goods. There is only a 24 hour window to notify the carrier

of any concealed damage.

Immediately • report all damage to the shipping company!

Then you may contact Morse for assistance with your

freight claim.

Morse Manufacturing will not be held responsible for any •

damaged freight that is not signed for as damaged.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects in

workmanship or materials for two years when used properly within

its rated capacity. Warranty does not cover wear from normal use

or damage from accident or abuse. Motors and other purchased

parts carry the warranties of their manufacturers.

For warranty claims, contact your Morse Dealer to obtain a

return authorization number, and for return freight advice. Return

freight must be prepaid.

In all instances, liability is limited to the purchase price paid or to

repairing or replacing the product. Customer assumes liability for

anymodications,unauthorizedrepairsorpartssubstitution.

Safety Information

While Morse Manufacturing Co. drum handling equipment is

engineeredforsafetyandeciency,ahighdegreeofresponsibility

must be placed upon the machine operator to follow safe practices,

based primarily on common sense, upon which true safety

depends.

Failure to follow the safety precautions in this manual can result in

personal injury or property damage. Observe the same precautions

as with similar machinery where carelessness in operating or

maintenance is hazardous to personnel. Carefully read the safety

precautions below and throughout this manual.

Review the Material Safety Data Sheet(s) for the material(s) in

the drum(s) and take all necessary precautions. Safety shoes,

work gloves, hard hat and other personal protective devices are

recommended.

Prior to initial use, inspect all moving parts and test rotation.

Perform necessary load test, inspections, operator training, etc.

The Specialist In Drum Handling Equipment

305 Series

AC Control Packages

Operator’s Manual for Morse 305 Series AC Control Packages

with Serial Number 300000 to ______

morsedrum.com

Safety Information (continued)

DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.

This signal word is limited to the most extreme situations.

WARNING - Indicates a situation which, if not avoided, could result in serious injury or

death.

CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.

DANGER – Live electrical parts could cause death or shock.

DANGER - Lock out and tag out power before working on any electrical wiring.

DANGER -Onlyqualiedelectriciansaretodoelectricalwork.

DANGER - Do not remove or install any parts while housing is connected to power.

WARNING - Changes made to the machine could cause death, injury or damage.

WARNING -DoNotModifytheUnit.Undernocircumstancesshouldanymodicationsbemadeto

theMorsemachinerywithoutfactoryauthorization.Anymodicationsmayvoidthewarranty.This

machinewasdesignedtoperformaspecicjobandalterationsmayresultininjurytooperatoror

machine.

WARNING - Rotating parts could cause death or severe injury.

WARNING -NoLooseFittingClothing.Wearclose-ttingclothingandsafetyequipmentappropriate

tothejob.Loosettingclothingmaybecomecaughtonthemachineryandcauseseverepersonal

injury.

CAUTION - Wear safety shoes with non-slip soles and hard toe protection.

WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to

the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

The Specialist In Drum Handling Equipment

305 Series

AC Control Packages

Operator’s Manual for Morse 305 Series AC Control Packages

with Serial Number 300000 to ______

morsedrum.com

Description

The Morse 305 Series Control Package includes the following features: a start & stop button along with a red emergency stop button. A

lockablemaindisconnecttoshutoandlockoutpowertotheunit.A24vdccontrolsupply.Wireterminalsforexternalconnectionofa

safety interlock switch. A timer for controlling the amount of tumbling time, from a few seconds to 16 hours.

Installation

Securecontrolmasttotheoorusingfour3/8”diameterx

3-1/2”longstudanchors(notincluded).Installmastoutside

safety enclosure.

Install interlock switch to safety enclosure. See enclosure

installation instructions.

Route wiring to interlock switch and motor. All wiring must

be to national and local code. Use a sealing strain relief to

bring wires into control box.

Connect control panel to tumbler. See control panel wiring

diagram and connection drawing on motor nameplate.

Terminals T1, T2 and T3 are marked on terminal block

inside control panel housing.

With power to circuit locked out and tagged out, connect

control panel to plant circuit.

Close panel before powering up.

Operating Instructions

Power up control panel. Press green START

button.

Slowly rotate can holder to upright position for

Load and secure can into the can holder. Follow

procedure in 305 Series Operator’s Manual.

Set timer to rotate can for desired time, from just

a few seconds to 16 hours. Use buttons to adjust

seconds, minutes & hours.

Rotate can. Follow procedure in 305 Series

Operator’s Manual.

After rotation, return can to upright for unloading.

Follow procedure in 305 Series Operator’s

Manual.

Press black STOP button to power down control

panel. A red EMERGENCY STOP button is

included in case of emergency. Push to activate and twist to release.

morse 1-305-3-50-CE User manual

Brand: morse

Model: 1-305-3-50-CE

Type: User manual

This manual is also suitable for

Download PDF

report

morse 1-305-3-50-CE User manual

This manual is also suitable for

morse 1-305-3-50-CE User manual

Related papers