NEC HT410 is a 1-chip DLP projector with XGA (1024x768) native resolution and 1000 ANSI lumens brightness. It has a 16:9 aspect ratio and a 1.65-1.96:1 throw ratio. The projector also features a 5-segment color wheel, a manual focus lens, and a manual zoom lens. The HT410 has a variety of input options, including HDMI, DVI, VGA, and S-Video. It also has a built-in speaker and a 3.5mm audio output. The projector can be ceiling-mounted or placed on a table or stand. It is ideal for use in classrooms, conference rooms, and home theaters.
Here are some of the key features and capabilities of the NEC HT410:
NEC HT410 is a 1-chip DLP projector with XGA (1024x768) native resolution and 1000 ANSI lumens brightness. It has a 16:9 aspect ratio and a 1.65-1.96:1 throw ratio. The projector also features a 5-segment color wheel, a manual focus lens, and a manual zoom lens. The HT410 has a variety of input options, including HDMI, DVI, VGA, and S-Video. It also has a built-in speaker and a 3.5mm audio output. The projector can be ceiling-mounted or placed on a table or stand. It is ideal for use in classrooms, conference rooms, and home theaters.
Here are some of the key features and capabilities of the NEC HT410:
NEC Solutions (America), Inc.
Visual Systems Division
HT410 Installation Guide
Floor and Ceiling Configuration v1.4
Contents
Product Description, Lens Specs, Screen/Aspect Ratio,
Notes and Formulas
Pg 1
Diagrams & Distance Charts; Ceiling Mounted
Pg 2
Floor
Pg 3
Cabinet Dimensions; Top, Front and Right
Pg 4
Bottom, Back and Left
Pg 5
Ceiling Mount Dimensions
Pg 6
Input Panel and Control Codes
Pg 7
Product Description
Type: 1 chip DMD
TM
projector Color Wheel: 5 Segments (2x)
Resolution: 854 x 480 (16:9 native) Dimensions: 7.36”(W) x 5.24”(H) x 13.60”(D)
Brightness: 1000 ANSI Lumens Weight: 6.6 lbs
Contrast Ratio: 1200:1
Lens Specifications
Throw Ratio: 1.65 - 1.96:1 (approximate) Manual Focus/Manual Zoom
Offset Angle: Min. Lens Shift 5.5
°
- 6.5
°
(for 100” Diag) Lens Shift: Vertical, Manual
Max. Lens Shift 13.5
°
- 16.0
°
(for 100” Diag) Focal Length: 19.5mm – 23.0mm
Screen Sizes: 30”-200” diagonal (16:9) F/#: 2.0 – 2.48
Notes
• For screen sizes not indicated in the projection charts, use the formulas below.
• The ceiling must be strong enough to support the projector and the installation must be in accordance with any local
building codes.
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projector placement, determine the image width for a
desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the image width for “W” in the
Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2.
Definitions: 16:9 Screen Formulas:
W = Image Width W = H x 16/9
H = Image Height (Size) H = W x 9/16
B = Vertical distance between lens center and screen center Screen Diagonal = W x 18.35756/16
C = Throw distance
Projection Formulas:
B(min) = 0.1877W
B(max) = 0.4710W
C(wide) = 1.6695W – 1.913
C(tele) = 1.9801W – 1.883
α(wide) = tan
-1
(B/C(wide))
α(tele) = tan
-1
(B/C(tele))
Note: Factory preset is B(max)/maximum lens shift.
www.necvisualsystems.com HT410 Page 1 of 7
Diagrams and Distance Charts
The following diagrams show the relationship between projector position and the screen. Refer to the chart below for data.
Distances are in inches. For millimeters multiply by 25.4.
Ceiling Mounted Configuration
Lens Ctr
*Factory Preset is B(max)
B(min)
B(max)
5.5"
Throw Distance
Lens Offset from
Mount Center
1.5"
C
6.6"
Note: Mount shown is NEC HT40CM.
Distance charts for popular 16:9 screens
Minimum Lens Shift Maximum Lens Shift
B
(min)
Diag W H wide
-
tele wide
-
tele
inches inches inches inches
30 26 14.6 4.9 41.5
-
49.6 6.7
-
5.6
55 48 27 9.0 78.2
-
93.2 6.6
-
5.5
60 52.5 29.5 9.9 85.7
-
102.1 6.6
-
5.5
73 64 36 12.0 104.9
-
124.8 6.5
-
5.5
82.6 72 40.5 13.5 118.3
-
140.7 6.5
-
5.5
92 80 45 15.0 131.6
-
156.5 6.5
-
5.5
100 87 49 16.3 143.3
-
170.4 6.5
-
5.5
106 92 52 17.3 151.7
-
180.3 6.5
-
5.5
110 96 54 18.0 158.4
-
188.2 6.5
-
5.5
119 104 58.5 19.5 171.7
-
204.0 6.5
-
5.5
133 116 65 21.8 191.7
-
227.8 6.5
-
5.5
161 140 79 26.3 231.8
-
275.3 6.5
-
5.5
200 174 98 32.7 288.6
-
342.7 6.5
-
5.4
Screen Size (16:9) C
inches
α
degrees
B
(max)
Diag W H wide
-
tele wide
-
tele
inches inches inches inches
30 26 14.6 12.2 41.5
-
49.6 16.4
-
13.9
55 48 27 22.6 78.2
-
93.2 16.1
-
13.6
60 52.5 29.5 24.7 85.7
-
102.1 16.1
-
13.6
73 64 36 30.1 104.9
-
124.8 16.0
-
13.6
82.6 72 40.5 33.9 118.3
-
140.7 16.0
-
13.6
92 80 45 37.7 131.6
-
156.5 16.0
-
13.5
100 87 49 41.0 143.3
-
170.4 16.0
-
13.5
106 92 52 43.3 151.7
-
180.3 15.9
-
13.5
110 96 54 45.2 158.4
-
188.2 15.9
-
13.5
119 104 58.5 49.0 171.7
-
204.0 15.9
-
13.5
133 116 65 54.6 191.7
-
227.8 15.9
-
13.5
161 140 79 65.9 231.8
-
275.3 15.9
-
13.5
200 174 98 82.0 288.6
-
342.7 15.9
-
13.5
Screen Size (16:9) C
inches
α
degrees
www.necvisualsystems.com HT410 Page 2 of 7
Diagrams and Distance Charts (cont.)
The following diagrams show the relationship between projector position and the screen. Refer to the chart below for data.
Distances are in inches. For millimeters multiply by 25.4.
Floor Configuration
Lens Ctr
*Factory Preset is B(max)
B(min)
B(max)
Throw Distance
C
Distance charts for popular 16:9 screens
Minimum Lens Shift Maximum Lens Shift
B
(min)
Diag W H wide
-
tele wide
-
tele
inches inches inches inches
30 26 14.6 4.9 41.5
-
49.6 6.7
-
5.6
55 48 27 9.0 78.2
-
93.2 6.6
-
5.5
60 52.5 29.5 9.9 85.7
-
102.1 6.6
-
5.5
73 64 36 12.0 104.9
-
124.8 6.5
-
5.5
82.6 72 40.5 13.5 118.3
-
140.7 6.5
-
5.5
92 80 45 15.0 131.6
-
156.5 6.5
-
5.5
100 87 49 16.3 143.3
-
170.4 6.5
-
5.5
106 92 52 17.3 151.7
-
180.3 6.5
-
5.5
110 96 54 18.0 158.4
-
188.2 6.5
-
5.5
119 104 58.5 19.5 171.7
-
204.0 6.5
-
5.5
133 116 65 21.8 191.7
-
227.8 6.5
-
5.5
161 140 79 26.3 231.8
-
275.3 6.5
-
5.5
200 174 98 32.7 288.6
-
342.7 6.5
-
5.4
Screen Size (16:9) C
inches
α
degrees
B
(max)
Diag W H wide
-
tele wide
-
tele
inches inches inches inches
30 26 14.6 12.2 41.5
-
49.6 16.4
-
13.9
55 48 27 22.6 78.2
-
93.2 16.1
-
13.6
60 52.5 29.5 24.7 85.7
-
102.1 16.1
-
13.6
73 64 36 30.1 104.9
-
124.8 16.0
-
13.6
82.6 72 40.5 33.9 118.3
-
140.7 16.0
-
13.6
92 80 45 37.7 131.6
-
156.5 16.0
-
13.5
100 87 49 41.0 143.3
-
170.4 16.0
-
13.5
106 92 52 43.3 151.7
-
180.3 15.9
-
13.5
110 96 54 45.2 158.4
-
188.2 15.9
-
13.5
119 104 58.5 49.0 171.7
-
204.0 15.9
-
13.5
133 116 65 54.6 191.7
-
227.8 15.9
-
13.5
161 140 79 65.9 231.8
-
275.3 15.9
-
13.5
200 174 98 82.0 288.6
-
342.7 15.9
-
13.5
Screen Size (16:9) C
inches
α
degrees
www.necvisualsystems.com HT410 Page 3 of 7
Cabinet Dimensions
The following drawings show the cabinet dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.
13.60
5.24 (from foot to button)
4.76
2.07 5.30
3.11
4.69
4.45
3.17
(focus)
13.27
0.0197
(button)
4.94
4.49 (boss)
www.necvisualsystems.com HT410 Page 4 of 7
Cabinet Dimensions (continued)
The following drawings show the cabinet dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.
M4x8 Max for Mount
M4x8 Max for Mount
M4x8 Max for Mount
5.81
(boss)
8.05 (boss)
9.94 (foot)
1.24
(foot)
1.77
0.33
0.79
1.61
2.602.60
1.12
(boss)
1.61
(foot)
1.18
(boss)
3.86
(boss)
(lens)
www.necvisualsystems.com HT410 Page 5 of 7
Optional Ceiling Mount Dimensions (Model #: HT40CM)
The following drawings show ceiling mount dimensions.
Dimensions are in inches. For millimeters multiply by 25.4.
The mount accommodates a 1.5” NPT treaded pipe extension or two 3/8”-16 threaded rod extensions.
Mount adjustments include roll, pitch and yaw.
Contact Peerless Industries for mount accessories at (800) 865-2112.
9.33
2.67
0.406
1.5" NPT
6.16
Standoffs
0.50
3.17
www.necvisualsystems.com HT410 Page 6 of 7
Input Panel
www.necvisualsystems.com HT410 Page 7 of 7
Control Codes
FUNCTION CODE DATA
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT COMPONENT 02H 03H 00H 00H 02H 01H 11H 19H
INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H
Note: Checksum (CKS) is already included in the commands above.
Note: Contact your NEC rep for codes not listed.
Cable Connection
Communication Protocol: PC Control Connector (DIN-8P)
Baud Rate: 38400 bps
Data Length: 8 bits
Parity: No Parity
Stop Bit: One bit
X on/off: None
Communications: Full duplex
21
3
4
5
786
To RxD of PC
To TxD of PC
To GND of PC
PC CONTROL
COMPUTER IN
AUDIO IN COMPONENT IN VIDEO IN AUDIO IN
S-VIDEO IN
R
L
Cr/Pr
Y
Cb/Pb
NOTE 1: It is recommended to set the projector to “Idle Mode” in the Setup menu for best Power ON response.
NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector.
NOTE 3: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps.
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
NEC HT410 is a 1-chip DLP projector with XGA (1024x768) native resolution and 1000 ANSI lumens brightness. It has a 16:9 aspect ratio and a 1.65-1.96:1 throw ratio. The projector also features a 5-segment color wheel, a manual focus lens, and a manual zoom lens. The HT410 has a variety of input options, including HDMI, DVI, VGA, and S-Video. It also has a built-in speaker and a 3.5mm audio output. The projector can be ceiling-mounted or placed on a table or stand. It is ideal for use in classrooms, conference rooms, and home theaters.
Here are some of the key features and capabilities of the NEC HT410:
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Panasonic ET-ELW20 Datasheet
-
Advaning FS1410-A208H User guide
-
Sharp M380HL Ceiling Mounted and Desktop Installation guide
-
Canon LV-7265 Command List
-
PyleHome PRJTP72 User manual
-
-
Delta Electronics VFD-DD-PD User manual
-
York 251934-YTG-J-0910 User manual
-
York 28971AR User manual
-