1
About the Wireless LAN Function
Check the version
The wireless LAN function was added in TD-15/TD-11 version
1.10. If the version is earlier than 1.10, download the update
from the support page (http://www.roland.com/support/)
g Downloads g product name (“TD-15” or “TD-11”) g
TD-15/TD-11 System Program Version 1.10, and update
your TD-15/TD-11.
* If this supplementary manual was included with a new
TD-15/TD-11 you purchased, your instrument has already been
updated to version 1.10 or later; you do not need to update.
How to check the version
Select the [MENU] button g “SYSTEM” g “Information.”
What is Wireless LAN function?
By inserting the wireless USB Adapter (WNA1100-RL; sold
separately) into the TD-15/TD-11’s USB MEMORY port, you’ll
be able to use wireless-compatible applications (such as the
“V-Drums Friend Jam for iPhone” iPhone app).
TD-15/TD-11
Wireless
USB Adapter (sold
separately: WNA1100-RL)
Wireless LAN access point
(e.g., wireless LAN router)
Wireless LAN Wireless LAN
iPhone etc.
Items required to use the wireless LAN function
Wireless USB Adapter (sold separately: WNA1100-RL)
Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3
iPhone or iPod touch etc.
*1 The wireless LAN access point you use must support WPS. If your
wireless LAN access point does not support WPS, you can connect
using the procedure described in “Connecting to a Wireless LAN
Access Point That You Select (SELECT ACCESS POINT)” (p. 2).
*2 The ability to connect with all kinds of wireless LAN access points
is not guaranteed.
*3 If you’re unable to connect to the wireless LAN access point, try
connecting using Ad-Hoc mode (p. 3).
Basic Connection Method (Connect by WPS)
The rst time you connect the TD-15/TD-11 to a wireless network,
you’ll need to perform the following procedure (WPS) to join the
wireless network.
This procedure is required only the rst time. (Once you’ve joined the
network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security settings
when connecting to a wireless LAN access point. We recommend
that you use WPS when connecting to a wireless LAN access point.
1. Turn OFF the TD-15/TD-11.
2. Insert the wireless USB Adapter (WNA1100-RL; sold
separately) into the TD-15/TD-11’s USB MEMORY port.
3. Turn ON the TD-15/TD-11.
Wait until the following icon appears in the upper right of the DRUM
KIT screen.
4. Press the button of the Wireless USB Adapter (sold
separately: WNA1100-RL).
The WPS screen will appear.
NOTE
* If you apply excessive force to the USB adapter when pressing
the button, you may damage it. Please use caution.
5. Perform the WPS operation on your wireless LAN access
point (e.g., press the WPS button on your wireless LAN
access point).
For details on WPS operation of your wireless LAN access point, refer
to the documentation for your wireless LAN access point.
6. Press the [F3] (OK) button of the TD-15/TD-11.
Once successfully connected, the status (WIRELESS STATUS) screen
(p. 2) will appear.
7. Press the [EXIT] button several times to return to the DRUM
KIT screen.
You can use the wireless connection from an iPhone app such as
V-Drums Friend Jam for iPhone. Choose “TD-15” or “TD-11” in the
instrument select screen of your iPhone app.
NOTE
* The device (e.g., iPhone) running the app must be connected to
the same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network the next time.
• All connection data will be erased if you perform a factory reset.
* Connection data is not included in a backup saved in the USB
ash drive.
Icons in the display
The wireless LAN status is shown in the upper part of the display.
Icon Explanation
Currently connected to the wireless LAN access point.
Three bars are used to indicate the signal level (the
strength of the connected wireless LAN access point’s
radio signal).
The wireless USB adapter is inserted, but not connected
with a wireless LAN access point.
The wireless USB adapter is not inserted (nothing is
displayed).
Ad-Hoc mode (p. 3).
TD-15/TD-11 1PS
About the Wireless LAN Function
2
Wireless LAN Function Settings
You can view or edit the wireless settings.
Status Indication (WIRELESS STATUS)
This shows the wireless LAN status.
1. Select the [MENU] g “SYSTEM” g “Wireless.”
The WIRELESS STATUS screen will appear.
Display Explanation
CONNECTED
Currently connected to the wireless LAN access point.
The identier (name) of the connected wireless LAN
access point is shown.
NOT CONNECTED
The wireless USB adapter is inserted, but not
connected to a wireless LAN access point.
NOT AVAILABLE The wireless USB adapter is not inserted.
AD-HOC MODE
Ad-Hoc mode (p. 3).
The Ad-Hoc SSID and Ad-Hoc Key are shown.
For details, refer to “Connecting in Ad-Hoc mode
(Ad-Hoc Mode)” (p. 3).
What the function buttons do
Button Explanation
[F1] (SEL AP)
Move to a screen where you can choose a wireless LAN
access point and connect to it.
[F2] (WPS) Move to a screen for performing WPS.
[F3] (OPTIONS)
Make settings for Wireless ID or Ad-Hoc mode (Ad-Hoc
Mode) (p. 3).
* If the wireless USB adapter is not inserted, the [F1] (SEL AP) and
[F2] (WPS) buttons will not be shown.
Connecting by WPS (WPS)
Here’s how you can use WPS to connect to a wireless LAN access
point.
MEMO
You can also make the WPS connection by pressing the button of
the wireless USB adapter (WNA1100-RL; sold separately). For the
procedure, refer to “Basic Connection Method (Connect by WPS)”
(p. 1).
1. Select the [MENU] button g “SYSTEM” g “Wireless” g
[F2] (WPS).
The WPS screen will appear.
2. Perform the WPS operation on your wireless LAN access
point (e.g., press the WPS button on your wireless LAN
access point).
For details on WPS operation of your wireless LAN access point, refer
to the documentation for your wireless LAN access point.
3. Press the [F3] (OK) button of the TD-15/TD-11.
Connection via WPS will take place.
Once successfully connected, you’ll be returned to the status
(WIRELESS STATUS) screen.
Connecting to a Wireless LAN Access Point
That You Select (SELECT ACCESS POINT)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1. Select the [MENU] button g “SYSTEM” g “Wireless” g
[F1] (SEL AP) button.
The SELECT ACCESS POINT screen will appear.
• A “ ” symbol is shown for the currently-connected wireless LAN
access point.
• You can update the list by pressing the [F2] (REFRESH) button.
2. Choose the wireless LAN access point to which you want to
connect, and press the [F3] (SELECT) button.
• You will be connected to the selected wireless LAN access point.
• If you’re using this wireless LAN access point for the rst time,
you’ll proceed to the authorization (AUTHORIZATION) screen.
• If this is a wireless LAN access point to which you have connected
in the past, just press the [F3] (SELECT) button and you’ll be
connected. Once successfully connected, you’ll be returned to the
status (WIRELESS STATUS) screen.
Authorization screen (AUTHORIZATION)
3. Enter the security code (passphrase) of your wireless LAN
access point, and press the [F3] (CONNECT) button.
For details on how to enter characters, refer to the TD-15/TD-11 Owner’s
Manual.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, you’ll be returned to the status
(WIRELESS STATUS) screen.
About the Wireless LAN Function
3
Other Settings (WIRELESS OPTIONS)
Make settings for Wireless ID or Ad-Hoc mode (Ad-Hoc Mode).
1. Select the [MENU] button g “SYSTEM” g “Wireless” g
[F3] (OPTIONS) button.
The WIRELESS OPTIONS screen will appear.
Parameter Explanation
Wireless ID
Species the nal digits of the
TD-15/TD-11
’s device name
and Ad-Hoc SSID (“TD-15” or “TD-11”) that will be shown as
the instrument in the wirelessly connected app.
Normally, you should specify “0,” but if you have more than
one of the same instrument, you can set the Wireless ID in
the range of 1–99 to change the device name and Ad-Hoc
SSID for each instrument, as follows.
If Wireless ID=0, “TD-15” (default value)
If Wireless ID=1, “TD-15-1”
:
If Wireless ID=99, “TD-15-99”
Ad-Hoc Mode Turns Ad-Hoc mode on/o.
Channel Species the channel (1–11) for Ad-Hoc mode.
* These settings will take eect after you’ve turned the unit o,
then back on again.
What the function buttons do
Button Explanation
[F1] (OPTIONS)
Make settings for Wireless ID or Ad-Hoc mode (Ad-Hoc
Mode).
[F2] (INFO) View the IP address and MAC address.
Connecting in Ad-Hoc mode (Ad-Hoc Mode)
Here’s how to connect in Ad-Hoc mode.
What is Ad-Hoc mode?
Ad-Hoc mode lets you connect the TD-15/TD-11 directly to an
iPhone or other wireless device without using a wireless LAN
access point. This is a convenient way to use the TD-15/TD-11
with an iPhone or other wireless device if you’re in a location
where the wireless LAN access point you normally use is
unavailable, such as when you’re away from home.
TD-15/TD-11
Wireless USB Adapter (sold
separately: WNA1100-RL)
Wireless LAN
iPhone etc.
Limitations
The iPod touch or other wireless device connected in Ad-Hoc
mode will be unable to communicate with the Internet or with
another wireless device. However, an iPhone or other wireless
device that has cellular capability will be able to connect to the
Internet via the cellular connection.
Please be aware that if you use a cellular connection for Internet
connectivity, you may incur costs depending on your rate plan.
1. Select the [MENU] button g “SYSTEM” g “Wireless” g
[F3] (OPTIONS) button.
The WIRELESS OPTIONS screen will appear.
2. Turn the Ad-Hoc Mode “ON.”
You can use Channel to specify a channel (1–11) for Ad-Hoc mode.
Normally, you won’t need to change the channel. Try changing the
channel only if you have problems connecting.
3. Turn the unit o, then on again.
4. Select the [MENU] g “SYSTEM” g “Wireless” to access the
WIRELESS STATUS screen.
The Ad-Hoc SSID (“TD-15” or “TD-11”) and the Ad-Hoc Key (a ve-
character text string) will be displayed.
MEMO
The Ad-Hoc SSID (“TD-15” or “TD-11”) will be the value that you
specied in the WIRELESS OPTIONS screen “Wireless ID” setting.
5. On the iPhone or other wireless device that you want to
connect, select the Ad-Hoc SSID shown in the above screen
to make the connection. (For example, on an iPhone,
choose [Settings] g [Wi-Fi] g [Choose a Network] to select
the above Ad-Hoc SSID. A password entry screen will
appear; enter the above Ad-Hoc key.)
For details on how to connect to a wireless LAN from an iPhone or
other device, refer to the owner’s manual of that device.
6. When you want to end the Ad-Hoc mode connection,
restore the iPhone settings in [Settings] g [Wi-Fi] g
[Choose a Network] to their previous state.
Checking the IP Address and MAC Address (INFO)
Here’s how to check the IP address and MAC address.
1. Select the
[MENU] button
g
“SYSTEM”
g
“Wireless”
g
[F3] (OPTIONS) button
g
[F2] (INFO) button.
MEMO
The MAC address shows the value
indicated on the bottom of the
wireless USB adapter (WNA1100-
RL; sold separately).
About the Wireless LAN Function
4
Troubleshooting
* For problems related to communication, refer also to the owner’s manual of your wireless LAN access point.
* For details on operating your wireless LAN access point, refer to its owner’s manual.
Problem Action
Can’t connect to a wireless LAN access
point
The TD-15/TD-11 indicates “Could not
make the wireless connection.”
• Make sure that your wireless LAN access point supports WPS.
If your wireless LAN access point does not support WPS, you can connect using the procedure described in “Connecting to a
Wireless LAN Access Point That You Select (SELECT ACCESS POINT)” (p. 2).
• The 802.11a/b wireless standard is not supported. Please use the 802.11g/n (2.4 GHz) wireless standard.
• The WEP authentication method is not supported. Please use the WPA or WPA2 authentication method.
• Make sure that DHCP is enabled for your wireless LAN access point.
• If you don’t get connected to the previously-connected wireless LAN access point when you turn on the unit, check and make
sure the setting described in “Connecting in Ad-Hoc mode (Ad-Hoc Mode)” (p. 3) is OFF.
• The connection might not occur successfully due to the state of the radio signal. If so, use the procedure described in “Connect-
ing to a Wireless LAN Access Point That You Select (SELECT ACCESS POINT)” (p. 2), and select your wireless LAN access point and
reconnect.
• There is a limit to the connection data that can be remembered. Making a new connection may cause older connection data to
be deleted.
All connection data will be deleted if you execute a factory reset.
If the connection data has been deleted, please re-connect to the wireless LAN access point.
• Connection data is not included in a backup saved in the USB ash drive, please re-connect to the wireless LAN access point.
The display indicates “This Access Point
is not supported,” and can’t connect to
the wireless LAN access point
• This Access Point is not supported. Please use the WPA or WPA2 authentication method.
Communication is unstable
Communication may be unstable depending on the usage of the radio frequency spectrum.
If communication is unstable, the response may be sluggish, or if using audio communication, there may be dropouts in the audio.
The following actions may improve the situation.
• Move the wireless LAN access point and the TD-15/TD-11 closer to each other.
• Change the channel setting of the wireless LAN access point.
The TD-15/TD-11 is not found in
the instrument connections of
the app (such as the iPhone app
V-Drums Friend Jam for iPhone)
• Is the TD-15/TD-11 powered up?
• Is the wireless USB adapter (WNA1100-RL) inserted to the TD-15/TD-11?
• Is the TD-15/TD-11 connected to the wireless LAN?
• Are the TD-15/TD-11 and the iPhone connected to the same network (the same wireless LAN access point)?
• Is the wireless LAN access point set to allow communication between wireless LAN devices?
For details on settings, refer to the owner’s manual of your wireless LAN access point.
Your iPhone or iPod touch won’t
connect to the Internet
• Is the wireless LAN access point connected to the Internet?
• Could you be connected in Ad-Hoc mode?
The iPod touch or other wireless device connected in Ad-Hoc mode will be unable to communicate with the Internet or with
another wireless device. However, an iPhone or other wireless device that has cellular capability will be able to connect to the
Internet via the cellular connection. Please be aware that if you use a cellular connection for Internet connectivity, you may incur
costs depending on your rate plan.
A wireless device such as an iPod touch that does not have cellular capability will become unable to connect to the Internet in
this case.
The TD-15/TD-11 indicates “When
streaming wirelessly, songs can not
play back.”
• When using the wireless LAN audio functionality, it is not possible to play back songs at the same time.
The changes of Ad-Hoc or Wireless ID
settings does not became eective.
• These settings will take eect after you’ve turned the unit o, then back on again.
The TD-15/TD-11 indicates “When
using USB, wireless can not send
audio/MIDI data.” and is unable to
communicate with the app.
Concerning the limitations on the USB audio/MIDI functionality and the
wireless LAN functionality
When the USB COMPUTER port of the TD-15/TD-11 is connected via USB to your computer, it is not possible to use wireless
LAN functionality at the same time as the USB audio/MIDI functionality.
• When the TD-15/TD-11 and your computer are connected via USB, it is possible to establish a wireless connection
using the specied method; however, you won’t be able to carry out audio or MIDI communications with the wirelessly
connected application. You must disconnect the USB connection between the TD-15/TD-11 and your computer before
using the wireless LAN functionality.
• Although you can specify the “TD-15” or “TD-11” (USB) as the output destination for your personal computer’s audio
and MIDI data even when you’re using a wirelessly connected application, no audio or MIDI data will be input or output
using the TD-15/TD-11’s USB connection. You must disconnect the wireless connection between the TD-15/TD-11 and a
wirelessly connected application before using the USB audio/MIDI functionality.
The TD-15/TD-11 indicates “When
using wireless, USB can not send
audio/MIDI data.” and is unable to use
the USB audio/MIDI.
Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
Copyright © 2012 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Roland F-20 Owner's manual
-
Roland INTEGRA-7 Editor Owner's manual
-
Roland DP-90S (Sort Højglans) User manual
-
Roland FP-50 Owner's manual
-
-
-
Roland FP-80 (Sort) Owner's manual
-
Roland VR-09 Owner's manual
-
-