LCD Television
User’s Guide
Changing Entertainment. Again.
16278150.0 Cover 12/11/03, 2:03 PM1
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
WARNING
To reduce the risk of fire or electric
shock, do not expose this product
to rain or moisture.
The apparatus shall not be exposed
to dripping or splashing and that
no objects filled with liquids, such
as vases, shall be placed on the
apparatus.
Caution: To reduce the risk of electric shock, do not
remove cover (or back). No user serviceable parts
inside. Refer servicing to qualified service personnel.
This symbol indicates important instructions
accompanying the product.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
Refer to the identification/rating label located on the back panel of your
product for its proper operating voltage.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user’s authority to operate it.
Cable TV Installer: This reminder is provided to call your attention to Article
820-40 of the National Electrical Code (Section 54 of the Canadian Electrical
Code, Part 1) which provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Important Information
Product Registration
Please fill out the product registration card (packed separately) and return it immediately. For U.S. customers: Your RCA
Consumer Electronics product may also be registered at www.rca.com/productregistration. Registering this product
allows us to contact you if needed.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the
serial and model numbers. These numbers are located on the product.
Model No. ____________________ Serial No. __________________ Purchase Date: ______________
Dealer/Address/Phone: _________________________________________________________________________
16278150.0 Cover 12/11/03, 2:03 PM2
i
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufac-
turer, or sold with the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. If an outside antenna or cable system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection against voltage surges and built-
up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984
(Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode. See
following example.
ANTENNA
LEAD IN
WIRE
GROUND CLAMP
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
Important Information
16278150.0 Cover 12/11/03, 2:03 PM3
This page left intentionally blank.
16278150.0 Cover 12/11/03, 2:03 PM4
1
Table of Contents
Chapter 1: Connections & Setup
Things to Consider Before You Connect ........................................................................................ 3
Protect Against Power Surges.................................................................................................. 3
Protect Components from Overheating.................................................................................. 3
Important Stand and Base Safety Information ....................................................................... 3
Position Cables Properly to Avoid Audio Interference ........................................................... 3
Use Indirect Light...................................................................................................................... 3
Connection Illustrations ........................................................................................................... 3
Check Supplied Parts ................................................................................................................ 3
Explanation of Jacks ........................................................................................................................ 4
Remove the Plate On the Back Panel ............................................................................................. 6
Connect Your Cable ......................................................................................................................... 6
Choose Your Connection ................................................................................................................. 6
Connection to AV Components ............................................................................................... 6
Connection to a Personal Computer ....................................................................................... 7
Plug in the TV................................................................................................................................... 8
Put batteries in the remote............................................................................................................. 8
Turn on the TV ................................................................................................................................. 8
Adjust the TV Screen ....................................................................................................................... 8
Mounting the TV to the Wall .......................................................................................................... 8
Set Up Your TV ................................................................................................................................. 8
Choose the Menu Language .................................................................................................... 9
Choose the Signal Type ............................................................................................................ 9
Complete Channel Search ........................................................................................................ 9
Set VID2 Source....................................................................................................................... 10
Chapter 2: Using the Remote Control
Button Descriptions for TV Mode.................................................................................................11
Button Descriptions for DVD and VCR Modes............................................................................. 11
Using the INPUT Button ......................................................................................................... 12
Programming the Remote to Operate Other Components ........................................................ 12
Find Out If You Need to Program the Remote ..................................................................... 12
Programming the Remote ..................................................................................................... 12
How to Use the Remote After You’ve Programmed It ......................................................... 13
Remote Control Codes .................................................................................................................. 14
Chapter 3: Using the TV’s Features
About the Channel Banner ........................................................................................................... 15
Why You Should Use the Autotuning Feature ............................................................................ 15
How to Set Up the Autotuning Feature................................................................................ 15
Parental Controls ........................................................................................................................... 16
How V-Chip Works .................................................................................................................. 16
US V-Chip Rating System ........................................................................................................ 17
Canadian English V-Chip Rating System ............................................................................... 17
Canadian French V-Chip Rating System ................................................................................ 18
V-Chip TV Ratings ................................................................................................................... 18
Blocking Specific Content Themes......................................................................................... 20
Viewing Specific Content Themes ......................................................................................... 20
V-Chip Movie Rating Limit ..................................................................................................... 20
Blocking Canadian V-Chip Ratings ........................................................................................ 21
V-Chip Unrated/Exempt Block ............................................................................................... 22
Front Panel Block .................................................................................................................... 22
Channel Block ......................................................................................................................... 22
Lock/Unlock Parental Controls ............................................................................................... 23
Additional Features ....................................................................................................................... 23
16278150.00 TOC 12/11/03, 2:03 PM1
2
Table of Contents
Chapter 4: Using the TV’s Menu System
Menus, On-screen Help, and Control Panels ............................................................................... 24
Exiting a menu ........................................................................................................................ 24
Controls ................................................................................................................................... 24
Picture Menu .................................................................................................................................. 25
Sound Menu................................................................................................................................... 26
Parental Control Menu .................................................................................................................. 27
Preferences Menu .......................................................................................................................... 27
Setup Menu.................................................................................................................................... 28
PC Picture Quality Menu ............................................................................................................... 28
PC Picture Size Menu ..................................................................................................................... 29
PC Sound Menu ............................................................................................................................. 29
PC Preferences Menu..................................................................................................................... 29
PC Information Center................................................................................................................... 30
Chapter 5: Other Information
Troubleshooting............................................................................................................................. 31
Care and Cleaning ......................................................................................................................... 32
Limited Warranty ........................................................................................................................... 33
Accessory Information .................................................................................................................. 35
16278150.00 TOC 12/11/03, 2:03 PM2
Chapter 1: Connections & Setup
Chapter 1 3
Graphics contained within this publication are for representation only.
Things to Consider Before You Connect
Protect Against Power Surges
• Connect all components before you plug any of their power cords into the wall outlet or power strip. NEVER plug
your TV into an outlet that is controlled by a wall switch.
•Turn off the TV and/or component(s) before you connect or disconnect any cables.
• Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with
your TV.
Protect Components from Overheating
• Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.
• Don’t stack components.
• If you place components in a stand, make sure you allow adequate ventilation.
• If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow around
other components.
Important Stand and Base Safety Information
If a stand or base is used ensure that is of adequate size and strength to prevent the TV from being accidentally tipped
over, pushed off, or pulled off. This could cause personal injury and/or damage the TV. Refer to the Important Safety
Instructions packed separately.
Position Cables Properly to Avoid Audio Interference
Insert each cable firmly into the designated jack.
Use Indirect Light
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect lighting.
Connection Illustrations
The components used in the connection illustrations are for representation only. The input jacks and the output jacks
on the back of your components (VCR, DVD player, etc.,) might look different than those illustrated.
Check Supplied Parts
Check that the following parts were packed with your product.
DVD
ON OFF
VCR TV
VOL
MUTE GO BACK
CH
CLEAR
MENU
PRESETS
CC
GUIDE
INFO
SKIP
123
4
56
7
89
0
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUS E
AGAIN
ZOOM
OPEN CLOSE
SPEED
SEARCH
OKOK
Remote Control
15 pin D-sub to
component video cable
adapter (use with the
RGB/YPbPr jack)
2 AAA batteries
Power cord
AC Power adapter
3.5mm mini phone
to audio cable adapter
(use with the Audio In or
Audio Out jack, not the
headphone jack)
16278150.01 Connections 12/11/03, 2:03 PM3
Connections & Setup
4 Chapter 1Graphics contained within this publication are for representation only.
Explanation of Jacks
This section describes the jacks and cables you might use to make connections. There are
several ways to connect components to your TV.
Different jacks and cables provide a different level of performance. It’s important to remember
the different degrees of picture improvement for comparison. The RGB/YPbPr (component)
jack is considered an excellent improvement; S-Video and Video (composite) jacks are
considered very good; while the Antenna/Cable connection is good.
VID1
S-Video In
Audio In
L/mono
R
Video In
Antenna/Cable
19V DC
Power In
RGB/YPbPr
Audio Out
Audio In
VID2
CH
VOL
MENU
POWER
Bottom Panel (view from back,
starting from left)
Back Panel
Side Panel
Bottom Panel
19V DC Power In Connect the power adapter cord to this jack to give the TV power.
VID1
• S-Video In The S-Video (super video) jack provides better picture quality than the regular
video jack because the color (chrominance, also called chroma) part of the signal is
separated from the black and white (luminance) part of the picture.
If a component you’re connecting to your TV (like a DVD player) has an S-VIDEO jack,
connect the DVD player to the TV with an S-Video cable (not provided) for better quality
picture.
Note: Remember to connect the left and right audio cables to the VID1 Audio In jacks
because the S-Video cable carries only the picture signal, not the sound.
• Audio In R Provides right audio connection. The right audio connector is usually red.
• Audio In L/mono Provides left audio connection. The left audio connector is usually
white.
Note: If your component has only one output for audio (mono), connect it to the L/Mono
Audio jack on the TV and don’t connect the R Audio part of the cable. In this case, you
need to change a setting to hear sound from both speakers. Go to the Sound menu,
highlight Sound Type and then choose Mono.
• Video In Provides composite video connection. The video connector is usually yellow.
Antenna/Cable Lets you connect a coaxial cable to receive the signal from the antenna, cable,
or cable box.
16278150.01 Connections 12/11/03, 2:04 PM4
Connections & Setup
Chapter 1 5
Graphics contained within this publication are for representation only.
Back Panel
VID2
• RGB/YPbPr (mini D-sub 15 pin) For connection of components that have RGB
or component output jacks (Y, Pb, Pr), such as a personal computer, HD receiver,
DVD player, or external RGB decoder.
The RGB/YPbPr jack provides excellent picture quality because the video is
separated into three signals. If your component has Y, Pb, Pr jacks, use the
supplied 15 pin D-sub to component video cable adapter. Connect component
video cables to the end of the adapter.
• Audio In (Stereo mini jack) Use to obtain sound when a component is
connected to the VID2 RGB/YPbPr jack. Use the supplied 3.5mm mini phone to
audio cable adapter. Connect audio cables to the end of the adapter.
• Audio Out (Stereo mini jack) Use to output the audio of the selected source
component connected to this unit to an AV amplifier or similar component. Use the
supplied 3.5mm mini phone to audio cable adapter. Connect audio cables to the
end of the adapter.
Side Panel
• Headphone Allows you to connect headphones to listen to the sound coming from the
TV.
Note: When you plug in headphones, the TV’s internal speakers are automatically turned
off.
If you can’t locate your remote, you can use the side panel of your TV to operate many of the
TV’s features.
MENU Brings up the Main menu. When the menu system is displayed, pressing MENU selects
highlighted items.
VOL
Increases the volume. In the menu system, it points right to items and adjusts menu
controls.
VOL
Decreases the volume. In the menu system, it points left to items and adjusts menu
controls.
CH
Scans up through the current channel list. In the menu system, it points down to items
and adjusts menu controls.
CH
Scans down through the channel list. In the menu system, it points up to items and
adjusts menu controls.
POWER Turns the TV on and off.
Note: If you use the Front Panel Block feature, the front panel buttons no longer provide
access to the menus. Go to Chapter 3 for more information.
16278150.01 Connections 12/11/03, 2:04 PM5
Connections & Setup
6 Chapter 1Graphics contained within this publication are for representation only.
Remove the Plate On the Back Panel
You need to remove the plate on the back panel in order to use the jacks. As the
picture to the left shows, push down on the tab and pull out the back plate carefully.
When you are finished connecting a component to the jacks, replace the plate.
VID1
S-Video In
Audio In
L/mono
R
Video In
Antenna/Cable
CABLE
OFF-AIR ANTENNA
OR
Connect Your Cable
Connect your cable or antenna to the Antenna/Cable jack on the bottom panel of the TV using
a coaxial cable.
VID1
S-Video In
Audio In
L/mono
R
Video In
AV component
Choose Your Connection
There are several ways to connect your television, depending on the components you want to
connect and the quality of the signal you want to achieve. The following are examples of some
ways to connect your TV. Choose the connection which is best for you.
Connection to AV Components
Using VID1
Connect a component, such as a VCR, DVD player or Satellite Receiver, to the TV using the
VID1 jacks. Connect an S-Video cable to the S-Video In jack at the bottom panel of the TV and
to the S-Video Out Jack on the component. Then connect audio cables to the Audio In L/mono
and R jacks on the bottom panel of the TV and to the Audio Output jacks on the component.
Note: If the component you are connecting only has a Video Jack, connect the component
to the TV’s Video In jack using a video cable.
16278150.01 Connections 12/11/03, 2:04 PM6
Connections & Setup
Chapter 1 7
Graphics contained within this publication are for representation only.
RGB/YPbPr
Audio Out
Audio In
+12V Output
VID2
Using VID2
Connect a component, such as a DVD player or digital cable box, to the TV using the VID2
jacks. Connect the supplied 15 pin D-sub to component video cable adapter to the RGB/YPbPr
jack on the back of the TV. Then connect component video cables to the adapter and connect
the other end to the component video jacks (Y, Pb, Pr) on the component. Connect the
supplied 3.5mm mini phone to audio cable adapter to the Audio In jack on the back of the TV.
Connect audio cables to the adapter and connect the other end to the Audio Output jacks on
the component.
Note: If you connect a component using the VID2 jacks, you need to set the VID2 source in
the Setup menu. Go to page 10 for more information.
Connection to a Personal Computer
Using VID2
Connect a personal computer to the TV using the VID2 RGB/YPbPr jack. Connect a 15-pin
monitor cable to the PC and the other end to the back of the TV.
Note: If you connect a component using the VID2 jacks, you need to set the VID2 source
in the Setup menu. Go to page 10 for more information.
The maximum panel resolution is 800 x 600. Be sure to set your PC to this monitor output
setting.
RGB/YPbPr
Audio Out
Audio In
+12V Output
VID2
AV component
16278150.01 Connections 12/11/03, 2:04 PM7
Connections & Setup
8 Chapter 1Graphics contained within this publication are for representation only.
Plug in the TV
Plug the end of the cord from the power adapter into the 19V DC In
Power jack on the bottom panel of the TV. Then connect the end of
the power cord into the other end of the power adapter. Plug the end
of the power cord into an appropriate wall outlet. Be sure to insert the
plug completely. Do not plug into an outlet controlled by a light
switch.
Put batteries in the remote
• Remove the battery compartment cover from the back of the remote by pushing down on
and sliding off the cover.
• Insert 2 fresh “AAA” batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.
Turn on the TV
Press TV on the remote, or press POWER on the TV’s side panel.
Note: Pressing the TV button turns on the TV and puts the remote into TV mode. “TV
mode” means that the buttons on the remote control operate the TV’s functions.
Adjust the TV Screen
The TV’s screen is adjustable simply by pushing on the top, front part of the screen, while your
other hand holds the base of the TV.
Mounting the TV to the Wall
Your LCD TV can be mounted to the wall using a compatible VESA
100 wall mount, which can be purchased at most electronic stores. To
mount the LCD TV you must first remove the stand.
1. Remove the four screws on either end of the bottom back panel.
2. Carefully lift up on the monitor until it slides out of place from the
stand.
3. Attach the wall mount to the four holes on the back middle part of
the TV.
4. Follow the directions that came with your wall mount.
Set Up Your TV
There are several options you might need to set up in order for your
TV to work properly. Turn on your TV, then press the MENU button
on your remote control. Follow the instructions on the next page.
Remove these
screws
Wall mount
holes
16278150.01 Connections 12/11/03, 2:04 PM8
Connections & Setup
Chapter 1 9
Graphics contained within this publication are for representation only.
Choose the Menu Language
Select your preferred language for the menu system.
1. From the Main menu, press the down arrow button to highlight
Preferences, then press OK (the Preferences menu appears with
Language highlighted).
2. The default language is English. To select French or Spanish,
press the right arrow button.
MAIN MENU
Picture
Sound
Parental Control
Preferences
Setup
Press MENU or CLEAR to exit.
Complete Channel Search
To search for all channels viewable through your antenna or cable TV
system:
1. From the Setup menu, press the down arrow button to highlight
Auto Channel Search.
2. Press the right arrow button to begin the channel search.
Note: Depending on the number of channels you receive, it
may take several minutes for the channel search to finish.
Setup
Signal Type Cable. . .
Auto Channel Search Start. . .
Autotuning. . .
Channel List. . .
Set VID2 Source PC. . .
Press </> to select.
Press MENU to go to Main Menu.
Setup
Signal Type Cable. . .
Auto Channel Search Start. . .
Autotuning. . .
Channel List. . .
Set VID2 Source PC. . .
Press </> to start. Press MENU to go to Main Menu.
Press OK to stop search.
MAIN MENU
Picture
Sound
Parental Control
Preferences
Setup
Press MENU or CLEAR to exit.
Preferences
Language English. . .
Closed Caption. . .
Menu Time-out 10 Seconds
Menu Position
Menu Background Opaque. . .
Sleep Timer 30 Minutes. . .
Press </> or OK to select.
Press MENU to go to Main Menu.
Choose the Signal Type
In order for your TV to search for channels, you need to make sure
your signal type is set correctly.
1. Press the MENU button (the MAIN MENU appears).
2. Press the down arrow button to highlight Setup, then press OK
(the Setup menu appears with Signal Type highlighted).
3. The Signal Type option is set to Cable. To change the option to
Antenna, press the right arrow button.
16278150.01 Connections 12/11/03, 2:04 PM9
Connections & Setup
10 Chapter 1Graphics contained within this publication are for representation only.
Setup
Signal Type Cable. . .
Auto Channel Search Start. . .
Autotuning. . .
Channel List. . .
Set VID2 Source PC. . .
Press </> to select.
Press MENU to go to Main Menu.
Set VID2 Source
If you have a component connected to the VID2 jacks on the TV, you
need to set the VID2 source.
1. From the Setup menu, press the down arrow button to highlight
Set VID2 Source.
2. Press the right arrow button to select Y Pb Pr, if your component
connected to VID2 has Y, Pb, Pr jacks; or select PC if connected to
a PC.
16278150.01 Connections 12/11/03, 2:04 PM10
Chapter 2: Using the Remote Control
Chapter 2 11
Graphics contained within this publication are for representation only.
Tip
To turn off most RCA, GE, and Proscan
components that are connected to the TV, press
ON•OFF twice within two seconds.
This feature only works with most RCA, GE, and
Proscan products.
Button Descriptions for TV Mode
Arrows Used to highlight different items in the TV menu and to
adjust the menu controls.
Indicator Indicates the programming mode when programming the
remote to control components. Lights when you press a valid button
on the remote. Flickers when a button is pressed and the batteries are
low.
(0-9) Number Buttons Enter channel numbers and password
settings directly through the remote control.
To enter a one-digit channel, enter a zero first. To enter a two-digit
channel, press the two digits and expect a few seconds delay. This is if
you want to enter a third digit.
CC Brings up the Closed Caption menu.
CH + or CH - Scans up or down through the current channel list.
Press once to change the channel up or down; press and hold to
continue changing channels.
CLEAR Removes any menu or display from the screen and returns
you to normal viewing.
GO BACK Returns you to the previous channel.
INFO Brings up the channel banner; press again to clear the screen.
INPUT Toggles through the available input sources (VID1, VID2-
YPbPr/VID2-PC and current channel).
MENU Brings up the Main menu.
MUTE Reduces the TV’s volume to its minimum level. Press again to
restore the volume.
OK When in the menu system, selects highlighted items.
ON•OFF When in TV mode, turns the TV on or off. If in another
mode (VCR or DVD) and programmed, will turn the component on or
off.
PRESETS Resets the picture settings to factory default for the video
input channel you’re currently tuned to.
SKIP Press once before changing channels and the TV will wait 30
seconds before returning to the original channel. Press repeatedly to
add more time.
TV Turns on the TV and puts the remote in TV mode. Also displays
current status.
VOL – or VOL + Decreases or increases the TV’s volume.
Button Descriptions for DVD and
VCR Modes
AGAIN In DVD mode, replays the last several seconds of the title
you’re playing.
ANTENNA In VCR mode, functions as a TV/VCR button.
DVD
ON OFF
VCR TV
VOL
MUTE GO BACK
CH
CLEAR
MENU
PRESETS
CC
GUIDE
INFO
SKIP
123
4
56
7
89
0
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
AGAIN
ZOOM
OPEN CLOSE
SPEED
SEARCH
OKOK
Indicator
16278150.02 Remote 12/11/03, 2:04 PM11
12 Chapter 2
Using the Remote Control
Graphics contained within this publication are for representation only.
DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and
tune to the correct video input channel. Also used with the ON•OFF button to turn on other
compatible DVD players.
GUIDE If you’re operating another component that has an on-screen program guide, this
button accesses the on-screen guide.
OPEN•CLOSE In DVD mode, opens or closes the DVD disc tray.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport
control for some remote-controllable VCRs or DVD players.
SEARCH In VCR mode, accesses Index Search feature.
SPEED In VCR mode, selects a recording speed.
VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV and
tune to the correct video input channel.
ZOOM In DVD mode, zooms in on the picture.
Using the INPUT Button
Use the INPUT button to scroll through the available video input channels and view
components you have connected to the TV.
1. Make sure the component you want to view is turned ON.
2. Press INPUT to tune to an available video input source and view the component.
3. To return to the previous channel, continue pressing INPUT.
You’ll use these buttons when
you program the remote.
DVD
ON OFF
VCR TV
VOL
MUTE GO BACK
CH
CLEAR
MENU
PRESETS
CC
GUIDE
INFO
SKIP
123
4
56
7
89
0
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
AGAIN
ZOOM
OPEN CLOSE
SPEED
SEARCH
OKOK
Programming the Remote to
Operate Other Components
The universal remote can be programmed to operate most brands of
remote controllable components. The remote is already programmed
to operate most RCA, GE, and Proscan components.
Notes: The TV button can’t be programmed on this remote.
The remote may not be compatible with all brands and models
of components. It also may not operate all functions of the
remote that came with your component.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be programmed
for your component, turn the component ON. For example, to
program the remote for a VCR, turn on the VCR. Point the remote at
the VCR, and press the VCR button. Then press ON•OFF or CH +
(channel up) or CH – (channel down) to see if the VCR responds to
the remote commands. If the component does not respond, the remote
needs to be programmed.
Programming the Remote
There are two ways to program the remote control:
• automatic code search
• direct entry
DVD
and VCR
buttons
ON•OFF
button
REVERSE
and PLAY
buttons
STOP
button
CLEAR
button
16278150.02 Remote 12/11/03, 2:04 PM12
Chapter 2 13
Using the Remote Control
Graphics contained within this publication are for representation only.
Using Automatic Code Search
The following instructions can be used to program the remote to operate each of your components. If
you want to stop the automatic code search without programming any of your components, press CLEAR
until the indicator on the remote turns off.
1. Turn on the component you want to operate (VCR or DVD player)
2. Press and hold the component button you want to program (VCR or DVD). While holding the
component button, press and hold ON•OFF until the indicator on the remote turns on, then release
both buttons.
3. Point the remote at the component. Press and release PLAY (the indicator light on the remote flashes).
The remote is searching for the correct code to program. When the indicator stops flashing (after
about 5 seconds), press PLAY again to tell the remote to search the next set of codes.
Continue pressing PLAY until the component turns off or the indicator light on the remote turns off. If
the indicator light turns off, then all the codes for that particular component have been tested once. If
the component does not turn off, then the remote can’t be programmed to operate that component.
Note: Each time you press PLAY, the remote sends about 10 sets of codes. Therefore, you might have
to press the PLAY button up to 20 times.
If the component you want to operate does turn off:
1. Press and release REVERSE, then wait 2 seconds. Repeat this step until the device turns back ON.
2. To finish, press and hold STOP until the indicator on the remote turns off.
Using Direct Entry
1. Turn on the component to be programmed.
2. Look up the brand and code number(s) for the component on the code list in this section.
3. Press and hold the component button you want to program on the remote.
4. Enter the code from the remote control code list on the following pages. If the indicator flashes, you
have either entered an invalid code or the button isn’t programmable.
5. Release the component button.
6. Point the remote at the component. Press ON•OFF to see if the component responds to the
command. If it doesn’t, try pressing the component button and then ON•OFF again.
• If you get no response, repeat these steps using the next code listed for your brand, until the
component responds to the remote commands.
• If you try all the codes for your component brand and none work, try the automatic code search
method. If automatic code search doesn’t find the code, the remote is not compatible with your
component.
How to Use the Remote After You’ve Programmed It
Because this universal remote can operate several different components, it uses operational modes
triggered by the component buttons. For example, if you want the remote to operate the TV, you would
press the TV button to put the remote into TV mode before you could operate the TV.
1. Press the appropriate component button (DVD, TV, VCR) to set the remote to operate the component.
2. Press ON•OFF to turn the component ON or OFF.
3. Use the remote buttons that apply to that component.
Note: If you keep pressing buttons and nothing happens, the remote is probably in the wrong
mode. You must press the component button that matches the component you want to operate (i.e.,
if you want to operate the VCR, press VCR on the remote control to put the remote in VCR mode.)
16278150.02 Remote 12/11/03, 2:04 PM13
14 Chapter 2
Using the Remote Control
Graphics contained within this publication are for representation only.
Remote Control Codes
VCR Codes
Programmable for VCR button.
Admiral ....................................................................................................................... 2132
Adventura ................................................................................................................... 2026
Aiko ............................................................................................................................ 2027
Aiwa ............................................................................................................................ 2026
Akai ....................................................... 2003, 2004, 2005, 2007, 2008, 2111, 2112, 2113
American High ........................................................................................................... 2021
Asha ............................................................................................................................ 2013
Audio Dynamics ............................................................................................... 2009, 2010
Audiovox .................................................................................................................... 2014
Bell & Howell ............................................................................................................ 2011
Beaumark ................................................................................................................... 2013
Broksonic ......................................................................................................... 2012, 2025
Calix ............................................................................................................................ 2014
Candle ......................................................................................... 2013, 2014, 2015, 2016,
................................................................................................................ 2017, 2018, 2019
Canon ..................................................................................................... 2021, 2022, 2114
Capehart ........................................................................................................... 2020, 2110
Carver ......................................................................................................................... 2062
CCE ................................................................................................................... 2027, 2061
Citizen .............................................................................................................. 2013, 2014,
.................................................................................. 2015, 2016, 2017, 2018, 2019, 2027
Colortyme ................................................................................................................... 2009
Colt ............................................................................................................................. 2061
Craig ............................................................................................. 2013, 2014, 2023, 2061
Curtis-Mathes ......................................................................................... 2000, 2009, 2013,
........................................................................ 2016, 2018, 2021, 2022, 2024, 2115, 2131
Cybernex .................................................................................................................... 2013
Daewoo ................................................ 2015, 2017, 2019, 2025, 2026, 2027, 2028, 2110
Daytron ....................................................................................................................... 2110
DBX .................................................................................................................. 2009, 2010
Dimensia .......................................................................................................... 2000, 2131
Dynatech .................................................................................................................... 2026
Electrohome ..................................................................................................... 2014, 2029
Electrophonic ............................................................................................................. 2014
Emerson ................................................................... 2012, 2014, 2015, 2021, 2024, 2025,
............. 2026, 2029, 2030, 2031, 2032, 2033, 2034,2035, 2036, 2037, 2038, 2039, 2040,
.................................. 2041, 2042,2044, 2045, 2046, 2047, 2065, 2113, 2116, 2117, 2130
Fisher .................................................... 2011, 2023, 2048, 2049, 2050, 2051, 2052, 2118
Fuji .................................................................................................................... 2021, 2119
Funai ........................................................................................................................... 2026
Garrard ....................................................................................................................... 2026
GE .......................................................................................................... 2000, 2001, 2013,
.................................................................................. 2021, 2022, 2053, 2115, 2120, 2131
Goldstar ........................................................................................ 2009, 2014, 2018, 2054
Gradiente .................................................................................................................... 2026
Harley Davidson ........................................................................................................ 2026
Harman Kardon ......................................................................................................... 2009
Harwood .................................................................................................................... 2061
Headquarter ............................................................................................................... 2011
Hitachi ............................................................................................................. 2055, 2056,
............................................................................................ 2057, 2107, 2111, 2120, 2122
Hi-Q ............................................................................................................................ 2023
Instant Replay ............................................................................................................ 2021
JCL .............................................................................................................................. 2021
JC Penney .................................................................................... 2009, 2010, 2011, 2013,
........................................................................................... 2014, 2021, 2022, 2055, 2056,
............................................................................................ 2058, 2059, 2060, 2107, 2118
Jensen ..................................................................................................... 2055, 2056, 2111
JVC ............................................................................ 2009, 2010, 2011, 2018, 2111, 2123
Kenwood ........................................................ 2009, 2010, 2011, 2016, 2018, 2111, 2123
KLH ............................................................................................................................. 2061
Kodak ............................................................................................................... 2014, 2021
Lloyd ........................................................................................................................... 2026
Logik ........................................................................................................................... 2061
LXI .............................................................................................................................. 2014
Magnavox .............................................................................................. 2021, 2022, 2062,
............................................................................................ 2063, 2104, 2105, 2108, 2124
Magnin ........................................................................................................................ 2013
Marantz ................................................. 2009, 2010, 2011, 2016, 2018, 2021, 2062, 2064
Marta ........................................................................................................................... 2014
Masushita .................................................................................................................... 2021
Mei .............................................................................................................................. 2021
Memorex .............................................. 2011, 2013, 2014, 2021, 2023, 2026, 2104, 2132
MGA ........................................................................................................ 2029, 2065, 2113
MGN Technology ....................................................................................................... 2013
Midland ....................................................................................................................... 2053
Minolta .................................................................................................... 2055, 2056, 2107
Mitsubishi ...................................................... 2029, 2055, 2056, 2065, 2066, 2067, 2068,
................................................... 2069, 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123
Montgomery Ward ........................................................................................... 2075, 2132
Motorola ........................................................................................................... 2021, 2132
MTC .................................................................................................................. 2013, 2126
Multitech ............................................................................. 2013, 2016, 2026, 2053, 2061
NEC ..................................................................................... 2009, 2010, 2011,2016, 2018,
.................................................................................. 2064, 2076, 2078, 2079, 2111, 2123
Nikko .......................................................................................................................... 2014
Noblex ........................................................................................................................ 2013
Olympus .................................................................................................................. 2021
Optimus ......................................................................................................... 2014, 2132
Optonica .................................................................................................................. 2096
Panasonic .............................................................. 2021, 2022, 2109, 2125, 2126, 2127
Pentax .............................................................................. 2016, 2055, 2056, 2107, 2120
Pentex Research ...................................................................................................... 2018
Philco ......................................................................................... 2021, 2022, 2062, 2063
Philips ........................................................................................ 2021, 2062, 2096, 2124
Pilot .......................................................................................................................... 2014
Pioneer ............................................................................ 2010, 2055, 2080, 2081, 2123
Portland ..................................................................................... 2016, 2017, 2019, 2110
Proscan ................................................................................................ 2000, 2001, 2131
Protec ....................................................................................................................... 2061
Pulsar ....................................................................................................................... 2104
Quarter .................................................................................................................... 2011
Quartz ...................................................................................................................... 2011
Quasar ................................................................................................. 2021, 2022, 2125
RCA ............................................................. 2000, 2001, 2003, 2013, 2021, 2055, 2056,
......................................................... 2082, 2083, 2084, 2085, 2086, 2087, 2088, 2089,
........................................................... 2090, 2091, 2107, 2115, 2120, 2125, 2131, 2133
Radioshack/Realistic ................................................................ 2011, 2013, 2014, 2021,
........................................................... 2022, 2023, 2026, 2029, 2049, 2050, 2096, 2132
Radix ........................................................................................................................ 2014
Randex ..................................................................................................................... 2014
Ricoh ........................................................................................................................ 2128
Runco ...................................................................................................................... 2104
Samsung ................................................................ 2005, 2013, 2015, 2033, 2053, 2112
Sanky ............................................................................................................. 2104, 2132
Sansui ........................................................................................ 2010, 2092, 2111, 2123
Sanyo ................................................................................................... 2011, 2013, 2023
Scott ................................................... 2012, 2015, 2025, 2032, 2038, 2065, 2093, 2116
Sears ............................................................................... 2011, 2014, 2021, 2023, 2048,
.................................................................... 2049, 2050, 2051, 2055, 2056, 2107, 2118
Sharp ............................................................ 2017, 2029, 2094, 2095, 2096, 2097, 2132
Shintom ..................................................................................... 2004, 2056, 2061, 2098
Shogun .................................................................................................................... 2013
Signature .................................................................................................................. 2132
Singer ................................................................................................... 2021, 2061, 2128
Sony ........................................................................................... 2004, 2098, 2099, 2119
STS ................................................................................................................. 2021, 2107
Sylvania ....................................................... 2021, 2022, 2026, 2062, 2063, 2065, 2124
Symphonic ............................................................................................................... 2026
Tandy ....................................................................................................................... 2011
Tashiko .................................................................................................................... 2014
Tatung ...................................................................................................................... 2111
TEAC .................................................................................................... 2026, 2085, 2111
Technics ......................................................................................................... 2021, 2109
Teknika ............................................................................ 2014, 2021, 2026, 2100, 2129
TMK ..................................................................................................... 2013, 2024, 2047
Toshiba ........................................................ 2015, 2049, 2051, 2055, 2065, 2093, 2116
Totevsion ....................................................................................................... 2013, 2014
Unitech .................................................................................................................... 2013
Vector Research ......................................................................... 2009, 2010, 2015, 2016
Victor ....................................................................................................................... 2010
Video Concepts ............................................................... 2009, 2010, 2015, 2016, 2113
Videosonic ............................................................................................................... 2013
Wards ........................................................................................ 2013, 2014, 2015, 2021,
............................................................................. 2023, 2026, 2029, 2055, 2056, 2061,
.................................................................... 2096, 2101, 2102, 2103, 2107, 2116, 2132
XR-1000 ............................................................................................... 2021, 2026, 2061
Yamaha ............................................................................ 2009, 2010, 2011, 2018, 2111
Zenith .............................................................................. 2004, 2098, 2104, 2119, 2128
DVD codes
Programmable for DVD button.
Aiwa ......................................................................................................................... 3009
Apex .............................................................................................................. 3023, 3024
GE ............................................................................................................................ 3000
Hitachi ..................................................................................................................... 3008
JVC ................................................................................................................. 3002, 3010
Konka ............................................................................................................ 3011, 3012
Magnavox ................................................................................................................ 3003
Mitsubishi ................................................................................................................ 3004
Panasonic ................................................................................................................ 3013
Philips ........................................................................................ 3003, 3019, 3021, 3022
Pioneer .................................................................................................................... 3005
Proscan .................................................................................................................... 3000
RCA ................................................................................................................ 3000, 3001
Samsung .................................................................................................................. 3025
Sanyo ....................................................................................................................... 3014
Sony ..................................................................................................... 3006, 3015, 3016
Toshiba ................................................................................................ 3007, 3017, 3020
Zenith ...................................................................................................................... 3018
16278150.02 Remote 12/11/03, 2:04 PM14
Chapter 3: Using the TV’s Features
Chapter 3 15
Graphics contained within this publication are for representation only.
About the Channel Banner
The Channel Banner appears when you press the TV or INFO button
on the remote. The following list describes the items on the Channel
Banner screen (left to right and top to bottom). Other displays that are
not described here are self-explanatory.
The icons change appearance to show the item’s status or availability.
8 Displays the current channel you are watching or input you are
tuned to.
Mute Icon Displayed when you mute the sound.
Parental Controls Lock Icon Displayed when Parental Controls are
locked.
Commercial Skip Timer 00:00:30 Corresponds to the SKIP button.
Shows the amount of time left before the TV switches back to the
previous channel.
Sleep Timer 01:30 Displays the amount of time remaining before
the TV turns off if you have set the sleep timer.
Why You Should Use the Autotuning Feature
The autotuning feature tunes the TV to the correct channel for different components you have
connected to your TV (like a VCR or DVD Player). When you set up autotuning in the menu
system, you don’t have to remember to change your TV to channel 3, for example, when you
want to watch the tape in your VCR.
How to Set Up the Autotuning Feature
The way you set up the autotuning feature in the TV’s menu corresponds to the component
buttons on the remote and the way you have each component connected to your TV. When
you set up autotuning, you’re telling the TV what channel to tune to when you press the VCR
or DVD button on the remote control.
1. Press MENU (the MAIN MENU appears).
2. Highlight Setup and press OK on your remote control.
3. Highlight Autotuning and press OK.
4. Choose which channel you want to set:
Set VCR Ch/Input Lets you set up the channel the TV tunes to when you press the VCR
button.
Set DVD Ch/Input Lets you set up the channel the TV tunes to when you press the DVD
button.
5. Press the right arrow button to select the choice that matches the way you have the
component connected to this TV.
The choices and a brief explanation follow:
Commercial Skip Timer 00:00:30
Sleep Timer 01:30
8
16278150.03 Features 12/11/03, 2:04 PM15
Graphics contained within this publication are for representation only.
Using the TV’s Features
16 Chapter 3
N/A Choose this if you don’t have this particular component
connected to the TV, or if you don’t want the TV to automatically tune
to the correct channel when you’re using this component.
03 Component is connected to the Antenna/Cable jack on the bottom
panel of the TV, and you want the TV to tune to channel 3 or 4 when
you press the corresponding button on the remote. Reminder: make
sure the component’s Channel 3/4 switch is set to the appropriate
channel.
VID1 Component is connected to the VID1 Video In or S-Video In
jack on the bottom panel of the TV and you want the TV to tune to a
video input channel when you press the corresponding button.
VID2 Component is connected to the VID2 RGB/YPbPr jack on the
back of the TV and you want the TV to tune to a component video
input channel when you press the corresponding button.
Parental Controls
The Parental Control menu allows you to program your TV so that
children cannot see certain programs, channels, or use the front panel
controls. The Parental Control menu also involves software inside
your TV (referred to as V-Chip) which lets you program your TV so it
won’t display certain programs and movies based on violence, sex, or
other content you may believe children should not view. Once you
block programs, you or other adults can unblock programs by
entering a password to unlock video or enter the password to edit the
features in the Parental Control menu. By default, the software inside
your TV is turned “off,” so if you don’t want to use this feature, you
can just ignore it.
How V-Chip Works
The V-Chip software reads a code that most broadcasters send with
programs. That code tells the software the program’s age-based rating
(TV-MA, TV-14, etc.) and content themes [(Violence (V), Adult
Language (L), etc.)]. If you have blocked the rating and/or content
themes that the program contains and the TV is locked and you tune
to a program whose rating exceeds the rating limit you set, you will
receive a message telling you that the program is not approved for
viewing.
Broadcasters are not required to provide content themes, so programs
received with no content themes will only be blocked if you block their
age-based rating and the TV is locked. You can also block out programs
that have been given a rating of Not Rated, and programs that are
considered unrated. The TV age-based ratings and content themes you
can block are listed on the next page.
Autotuning
Set VCR Ch/Input 03. . .
Set DVD Ch/Input VID2. . .
Press </> or OK to select.
Press MENU to go to Setup Menu.
Parental Control
US V-Chip. . .
Canada V-Chip. . .
V-Chip Unrated/Exempt View. . .
Front Panel Block
Channel Block. . .
Lock Parental Controls. . .
Press </> or OK to go to the sub-menu.
Press MENU to go to Main Menu.
16278150.03 Features 12/11/03, 2:04 PM16
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
