Murphy Crusader PowerView Initial Twin Engine User manual

Murphy
Brand
Murphy
Model
Crusader PowerView Initial Twin Engine
Category
Engine
Type
User manual

This manual is also suitable for

Murphy Crusader PowerView Initial Twin Engine is an advanced engine monitoring system designed to provide comprehensive data and control for twin-engine vessels. With its intuitive keypad and customizable display, it offers a user-friendly interface for accessing critical engine parameters and managing fuel usage. The system enables you to monitor both engines simultaneously, displaying essential information such as RPM, temperature, pressure, and fuel consumption.

Murphy Crusader PowerView Initial Twin Engine is an advanced engine monitoring system designed to provide comprehensive data and control for twin-engine vessels. With its intuitive keypad and customizable display, it offers a user-friendly interface for accessing critical engine parameters and managing fuel usage. The system enables you to monitor both engines simultaneously, displaying essential information such as RPM, temperature, pressure, and fuel consumption.

00-02-0620
06-21-06
Section 78
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
MURPHY, the Murphy logo, and PowerView
™
are registered and/or common law trademarks of Murphy Industries, Inc. This document, including textual
matter and illustrations, is copyright protected by Murphy Industries, Inc., with all rights reserved. (c) 2006 Murphy Industries, Inc.
Crusader PowerView Instruction Sheet
INITIAL TWIN ENGINE SET UP
1.
After installation start your engines. Both PowerView
units will be reading the Master engine. Choose to leave
one engine running and kill the other.
2.
While the one engine is running, press MENU on the
PowerView keypad. Scroll down to the bottom of the
second page until UTILITIES is highlighted. Press
Enter.
3.
Within the UTILITIES menu you will find a list of options.
4.
Scroll to the bottom of the second page until “SELECT
ENGINE ECU” is highlighted. Press ENTER.
5.
This screen will default to listen to the Master engine (0).
To change this to listen to the Slave engine (1) press the
right arrow key. 1 will appear on the screen. Press
ENTER.
NOTE:
Make sure to press ENTER after selecting ECU
1 in order to activate your selection.
6.
Press MENU to go back to the main data screens. You
should now have data available for the engine. If you do
not, then the engine you are working with is the Master
and should be set to 0 and the other engine is the Slave
and should be set to 1. Repeat this process to change
the other PowerView unit.
RESETTING FUEL OPTIONS
1.
Press MENU and scroll down to the bottom of the
second page until UTILITIES is highlighted. Press
ENTER.
2.
Here you will find multiple fuel parameters that can be
reset at the discretion of the user.
3.
Scroll to highlight “RESET TRIP FUEL” and press
ENTER. The parameter will reset.
4.
Press MENU to return to the data screens.
5.
When the fuel parameters are reset, the screen will
display a message to indicate that.
PowerView Keypad Buttons
  • Page 1 1
  • Page 2 2

Murphy Crusader PowerView Initial Twin Engine User manual

Murphy
Brand
Murphy
Model
Crusader PowerView Initial Twin Engine
Category
Engine
Type
User manual
This manual is also suitable for

Murphy Crusader PowerView Initial Twin Engine is an advanced engine monitoring system designed to provide comprehensive data and control for twin-engine vessels. With its intuitive keypad and customizable display, it offers a user-friendly interface for accessing critical engine parameters and managing fuel usage. The system enables you to monitor both engines simultaneously, displaying essential information such as RPM, temperature, pressure, and fuel consumption.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents