Zanussi ZWSE7100V User manual

Brand: Zanussi

Model: ZWSE7100V

Category: Washing machines

Type: User manual

Zanussi ZWSE7100V offers a variety of washing programs to suit different fabrics and soil levels, including Normal, Cottons + Prewash, Cotton Eco, Synthetics, Delicates, Wool/Handwash, Rinse, Drain, Spin, Easy Iron, 5 Shirts, Mini 30, and Jeans. It features adjustable temperature and spin speed settings, a delay start option, and an extra rinse option. The machine also comes with child lock and rinse hold functions for safety and convenience.

User manual

Washing Machine

ZWSE 7100 V

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2

Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3

Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 4

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5

Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5

Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6

Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 7

Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8

Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10

Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 13

Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15

Technical information _ _ _ _ _ _ _ _ _ _ _ 17

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the

supplied instructions. The manufacturer is not responsible if an in-

correct installation and use causes injuries and damages. Always

keep the instructions with the appliance for future reference.

Children and vulnerable people safety

Warning! Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when it is

open.

• If the appliance has a child safety device, we recommend you

activate it.

• Cleaning and user maintenance shall not be made by children

without supervision.

General Safety

• Before maintenance, deactivate the appliance and disconnect

the mains plug from the mains socket.

www.zanussi.com

• Do not change the specification of this appliance.

• Obey the maximum load volume of 5 kg (refer to the “Pro-

gramme chart” chapter).

• If the supply cord is damaged, it must be replaced by the manu-

facturer, its service agent or similarly qualified persons in order

to avoid a hazard.

• The operating water pressure (minimum and maximum) must be

between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)

• The ventilation openings in the base (if applicable) must not be

obstructed by a carpet.

• The appliance is to be connected to the water mains using the

new supplied hose-sets. Old hose sets must not be reused.

Safety instructions

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move the

appliance again you must block the drum.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where

the temperature is less than 0 °C or where it

is exposed to the weather.

• Obey the installation instruction supplied

with the appliance.

• Make sure that the floor where you install

the appliance is flat, stable, heat resistant

and clean.

• Do not install the appliance where the appli-

ance door can not be fully opened.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safe-

ty gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary space

between the appliance and the carpet.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power sup-

ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Should

the appliance power supply cable need to

be replaced, this must be carried out by our

Service Centre.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains

plug with wet hands.

www.zanussi.com

• This appliance complies with the E.E.C. Di-

rectives.

Water connection

• Make sure not to cause damage to the wa-

ter hoses.

• The appliance is to be connected to the wa-

ter mains using the new supplied hose-sets.

Old hose sets must not be reused.

• Before you connect the appliance to new

pipes or pipes not used for a long time, let

the water flow until it is clean.

• The first time you use the appliance, make

sure that there is no leakage.

Use

Warning! Risk of injury, electrical shock,

fire, burns or damage to the appliance.

• Use this appliance in a household environ-

ment.

• Do not change the specification of this ap-

pliance.

• Obey the safety instructions on the deter-

gent packaging.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

• Do not touch the glass of the door while a

programme operates. The glass can be hot.

• Make sure that you remove all metal objects

from the laundry.

• Do not put a container to collect possible

water leakage under the appliance. Contact

the Service to ensure which accessories

can be used.

Care and Cleaning

Warning! Risk of injury or damage to the

appliance.

• Before maintenance, deactivate the appli-

ance and disconnect the mains plug from

the mains socket.

• Do not use water spray and steam to clean

the appliance.

• Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use

abrasive products, abrasive cleaning pads,

solvents or metal objects.

Disposal

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent children

and pets to get closed in the appliance.

Environment concerns

Recycle the materials with the symbol . Put

the packaging in applicable containers to

recycle it.

Help protect the environment and human

health and to recycle waste of electrical and

electronic appliances. Do not dispose

appliances marked with the symbol

with the

household waste. Return the product to your

local recycling facility or contact your

municipal office.

Packaging materials

Recycle the materials with the symbol

Put the packaging in applicable containers to

recycle it.

Ecological hints

To help the environment, use less water and

energy, obey these instructions:

• Set a programme without the prewash

phase to wash laundry with normal soil.

• Always start a washing programme with the

maximum load of laundry.

• If necessary, use a stain remover when you

set a programme with a low temperature.

• To use the correct quantity of the detergent,

check the water hardness of your domestic

system

www.zanussi.com

Product description

1 2 3

Worktop

Detergent dispenser

Control panel

Door handle

Drain pump filter

Rating plate

Feet for the appliance level

Control panel

60°

30°

1000

700

500

Delay Start

Quick

Te m

perature

Rins

Hold

Spin

Extra

Rinse

Start/Pause

Synthetics

Wool

Handwash

Normal

+ Prewash

Cotton Eco

Rinse

Drain

Spin

5 shirts

Mini 30

Easy Iron

Jeans

CottonSpecial

Delicates

Mix 20°

3 4

6 578910

Programme knob

Display

Delay start button (Delay Start)

Door locked indicator

Start/pause button (Start/Pause)

Extra rinse button

(Extra Rinse)

Super quick button

(Quick Wash)

Rinse hold button

(Rinse Hold)

Spin reduction button (Spin)

Temperature button (Тemperature)

Display

The display shows:

A CB

A) The delay start.

When you press the

delay start button,

the display shows

the delay start time.

B) The child lock symbol.

www.zanussi.com

The symbol comes on the display when the re-

lated function is set.

C) The programme time and the alarm codes.

If the appliance has a malfunction, the display

shows the alarm codes. Refer to the chapter

'Troubleshooting' .

The display shows the message Err for some

seconds if:

– You set a function that is not applicable for

the programme.

– You change the programme while it oper-

ates.

Programmes

Programme

Temperature range

Type of load and soil

Maximum load, Maximum spin

Normal

(Cottons)

90 °C -

(Cold)

White cotton and coloured cotton (normal soil and light soil).

5 kg, 1000 rpm

Cottons + Prewash

(Cottons + Prewash)

90 °C -

(Cold)

White cotton and coloured cotton (heavy soil and normal soil).

5 kg, 1000 rpm

Cotton Eco

(Cotton Eco)

60 °C - 40 °C

White cotton and colour-fast cotton. Normal soil.

5 kg, 1000 rpm

Synthetics

(Synthetics)

60 °C -

(Cold)

Synthetic items or mixed fabric items. Normal soil.

2.5 kg, 1000 rpm

Mix 20°

(Mix 20°)

20 °C

Special programme for cotton, synthetic and mixed fabrics with

light soil.

Set this programme to decrease the energy consumption.

Make sure that the detergent is for low temperature in order to

have good washing results.

3 kg, 1000 rpm

Delicates

(Delicates)

40 °C -

(Cold)

Delicate fabrics as acrylics, viscose, polyester items. Normal soil.

2.5 kg, 700 rpm

Wool/Handwash

(Wool/Handwash)

40 °C –

(Cold)

Machine washable wool, hand washable wool and delicate fab-

rics with «hand washing» care symbol.

1.5 kg, 1000 rpm

Rinse

(Rinse)

To rinse and spin the laundry. All fabrics.

5 kg, 1000 rpm

Drain

(Drain)

To drain the water in the drum. All fabrics.

5 kg

Spin

(Spin)

To spin the laundry and to drain the water in the drum. All fab-

rics.

5 kg, 1000 rpm

www.zanussi.com

Programme

Temperature range

Type of load and soil

Maximum load, Maximum spin

Easy Iron

(Easy Iron)

60 °C -

(Cold)

Synthetic fabric items. Normal soil. It prevents the laundry crea-

ses.

1 kg, 700 rpm

5 Shirts

30 °C

Synthetic and mixed fabric items. Light soil and items to freshen

up.

For 5 - 6 shirts, 700 rpm

Mini 30

(Mini)

30 °C

Synthetic and delicate items. Light soil or items to freshen up.

2.5 kg, 700 rpm

Jeans

(Jeans)

60 °C -

(Cold)

Items in denim and jersey. Also for items in dark colours.

5 kg, 1000 rpm

1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010,

these programmes are respectively the “standard 60° C cotton programme” and the “standard 40° C

cotton programme”. They are the most efficient programmes in terms of combined energy and water

consumption for washing normally soiled cotton laundry.

The water temperature of the washing phase can be different from the temperature declared for the set

programme.

2) The appliance performs the short heating phase if the water temperature is below 20 °C. The appliance

can show the temperature setting as “cold”.

Consumption values

The data of this table are approximate. Different causes can change the data: the quantity

and type of laundry, the water and ambient temperature.

Programmes Load

(Kg)

Energy con-

sumption

(kWh)

Water con-

sumption (litre)

Approximate

programme

duration (mi-

nutes)

Remaining

moisture

(%)

Cottons 60 °C 5 0.83 44 125 60

Cottons 40 °C 5 0.60 52 115 60

Synthetics 40 °C 2.5 0.39 41 89 37

Delicates 40 °C 2.5 0.45 51 49 37

Wool/Hand wash

30 °C

1.5 0.40 61 40 32

Standard cotton programmes

Standard 60 °C

cotton

5 0.70 41 205 60

Standard 60 °C

cotton

2.5 0.65 34 151 60

www.zanussi.com

Programmes Load

(Kg)

Energy con-

sumption

(kWh)

Water con-

sumption (litre)

Approximate

programme

duration (mi-

nutes)

Remaining

moisture

(%)

Standard 40 °C

cotton

2.5 0.50 33 147 60

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.48 0.48

The information given in the charts above are in compliance with the EU Commission regulation

1015/2010 implementing directive 2009/125/EC.

Options

Programme options compatibility

Programme

∎ ∎ ∎ ∎ ∎

+ Prewash

∎ ∎ ∎ ∎ ∎

∎ ∎

∎ ∎ ∎ ∎ ∎

∎ ∎

∎ ∎ ∎ ∎ ∎

∎ ∎

∎

∎ ∎

∎

∎ ∎

∎

∎ ∎

∎

1) When you set the Super Quick option, we recommend that you decrease the quantity of the laundry. It is

possible to keep the full load but the washing results can be unsatisfactory. Recommended load: cotton:

2.5 kg, synthetics and delicates: 1.5 kg.

Temperature button (Тemperature)

Press this button to change the default tem-

perature.

Symbol

— cold water.

Spin button (Spin)

With this button you can decrease the spin

speed.

The indicator of the set speed comes on.

www.zanussi.com

Rinse Hold button (Rinse Hold)

Set this function to prevent the laundry crea-

ses.

There is a water in the drum when the

programme is completed.

Super quick button (Quick Wash)

Press this button to decrease the programme

duration.

Set this function for items with light soil or

items to refresh.

Extra rinse button (Extra Rinse)

Press this button to add rinsing phases to a

programme.

Use this function for persons allergic to deter-

gents and in areas where the water is soft.

Delay start button (Delay Start)

Press this button to delay the start of a pro-

gramme from 30 minutes to 20 hours.

Door indicator

• You cannot open the appliance door when

the indicator is on.

• You cannot open the appliance door when

the indicator flashes. Wait for some minutes

before you open the door.

• You can open the door only when the indi-

cator goes off.

If the programme is completed but the

indicator stays on:

• There is water in the drum.

• The 'Rinse Hold' function is on.

Child lock function

This function prevents the children to play with

the control panel.

• To activate the function, press the button

“Тemperature” and the button “Spin” at the

same time until the display shows the sym-

bol

• To deactivate the function, press the same

buttons until the symbol

goes off.

You can activate the function:

• Before you press the Start/Pause button:

the appliance cannot start.

• After you press the Start/Pause button, all

the buttons and the programme knob do not

operate.

Acoustic signals function

The acoustic signals operate when:

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic signals,

press the button “Rinse Hold” and the button

“Quick Wash” at the same time for 6 seconds.

If you deactivate the acoustic signals,

they continue operate when the appliance

has a malfunction.

Permanent extra rinse function

With this option you can permanently have an

extra rinse when you set a new programme.

• To activate this function press the button

“Rinse Hold” and the button “Extra Rinse” at

the same time. The indicator of the button

“Extra Rinse” comes on.

• To deactivate this function press the same

buttons again until the indicator of the but-

ton “Extra Rinse” goes off.

Before first use

1. Put 2 litre of water in the detergent com-

partment for washing phase. This acti-

vates the drain system.

2. Put a small quantity of detergent in the

compartment for washing phase.

3. Set and start a programme for cotton at

the highest temperature without laundry.

This removes all possible dirt from the

drum and the tub.

www.zanussi.com

Daily use

1. Open the water tap.

2. Connect the mains plug to the mains

socket.

3. Put the laundry in the appliance.

4. Use the correct quantity of detergent and

additives.

5. Set and start the correct programme for

the type of laundry and soil.

Loading the laundry

1. Open the appliance door.

2. Put the laundry in the drum, one item at

a time. Shake the items before you put

them in the appliance. Make sure not to

put too much laundry in the drum.

3. Close the door.

Caution! Make

sure that no

laundry stays be-

tween the seal and

the door. There is a

risk of water leakage

or damage to the

laundry.

Filling the detergent and additives

Caution! Use only specified detergents

for washing machine.

The detergent compartment for the pre-

wash phase or for the soak programme.

Add the detergent for prewash and soak

before the start of the programme.

The detergent compartment for the

washing phase.

If you use a liquid detergent, put it im-

mediately before you start the pro-

gramme.

Liquid additives compartment (fabric

conditioner, starch).

Put the product in the compartment be-

fore you start the programme.

Always obey the instructions that you find

on the packaging of the detergent prod-

ucts.

Using the liquid detergent

• Pull out the deter-

gent dispenser un-

til it stops.

• Pull out the deter-

gent divider from

its position (A).

www.zanussi.com

• Put it into the spe-

cial guides in the

middle of the com-

partment for the

washing phase.

• Measure out the detergent and the fabric

conditioner.

• Carefully close the detergent dispenser.

When you use the detergent divider:

–

Do not use gelatinous or thick liquid de-

tergents.

– Do not put more liquid detergent than the

edge of the detergent divider.

– Do not set the prewash phase.

– Do not set the delay start function, if it is

available.

Setting a programme

1. Turn the programme knob and set the

programme.

2. The indicator of Start button flashes.

3. If necessary, change the temperature and

the spin speed or add available functions.

When you press the relevant button, the

indicator of the set function comes on.

Starting a programme without the delay

start

Press the Start/Pause button:

• The indicator of button Start/Pause stops to

flash. The indicator

is on.

• The programme starts and the door locks.

• The programme time decreases with steps

of one minute.

Starting a programme with the delay

start

• Press the “Delay Start” button again and

again until the display shows the delay you

want to set. The related symbol comes on.

• Press the Start/Pause button:

The appliance starts the countdown. The in-

dicator

goes on.

When the countdown is completed, the pro-

gramme starts automatically.

You can change or cancel the delay start

before you press the Start button. After

pressing the Start button you can only cancel

the delay.

To cancel the delay start:

1. Press the Start/Pause button to set the

appliance to PAUSE.

2. Press the “Delay Start” button. The dis-

play shows

’.

3. Press the Start/Pause button again to

start the programme immediately.

Interruption of a programme

1. Press the button Start/Pause. The indica-

tor flashes.

2. Press the button Start/Pause again. The

washing programme continues.

Cancel a programme

Turn the programme knob to

to cancel

the programme and to deactivate the ap-

pliance.

2. Turn the programme knob again to acti-

vate the appliance. You can set a new

washing programme then.

The appliance does not drain the water.

Changing the options

You can change only some options before

they operate.

1. Press the button Start/Pause. The indica-

tor flashes.

2. Change the options.

3. Press the button Start/Pause again. The

programme continues.

Open the door

While a programme or the delay start oper-

ates, the appliance door is locked. The indica-

tor

is on.

Caution! If the temperature and level of

the water in the drum are too high, you

cannot open the door.

www.zanussi.com

To open the appliance door when the

delay start operates:

1. Press the button Start/Pause to set the

appliance to PAUSE.

Wait until the indicator

goes off.

3. You can open the door.

4. Close the door and press the button

Start/Pause again. The delay start contin-

ues to operate.

To open the appliance door when the

programme operates:

Turn the programme knob to

to deacti-

vate the appliance.

2. Wait for some minutes and then open the

appliance door.

3. Close the appliance door.

4. Set the programme again.

At the end of the programme

• The appliance stops automatically.

• The display shows the End symbols.

•

Turn the programme knob to

to deacti-

vate the appliance.

• Remove the laundry from the appliance.

Make sure that the drum is empty.

• Keep the door ajar, to prevent mildew and

odours.

• Close the water tap.

The washing programme is completed,

but there is water in the drum:

– The Rinse Hold function or a programme

that stops with water in the drum is set.

– The door stays locked and the start button

indicator flashes.

– You must drain the water before to open the

door.

To drain the water:

1. If necessary, decrease the spin speed.

2. Press the start button. The appliance drain

the water and spin.

3. When the programme is completed:

– The display shows the End symbols.

– You can open the door.

Turn the programme knob to

to deacti-

vate the appliance.

Stand by

Some minutes after the end of the washing

programme, if you do not deactivate the appli-

ance, the energy saving status activates.

The energy saving status decreases the ener-

gy consumption when the appliance is on the

standby.

• All indicators and the display go off.

• The indicator of button Start flashes slowly

Press one of the buttons to deactivate the en-

ergy saving status.

Hints and tips

The laundry load

• Divide the laundry in: white, coloured, syn-

thetics, delicates and wool.

• Obey the washing instructions that are on

the laundry care labels.

• Do not wash together white and coloured

items.

• Some coloured items can discolour with the

first wash. We recommend that you wash

them separately for the first times.

• Button up pillowcases, close zippers, hooks

and poppers. Tie up belts.

• Empty the pockets and unfold the items.

• Turn inside out multilayered fabrics, wool

and items with painted illustrations.

• Remove hard stains.

• Wash with a special detergent heavy soil

stains.

www.zanussi.com

• Be careful with the curtains. Remove the

hooks or put the curtains in a washing bag

or pillowcase.

• Do not wash in the appliance :

– Laundry without hems or with cuts

–Underwired bras.

– Use a washing bag to wash small items.

• A very small load can cause balance prob-

lems with the spin phase. If this occurs, ad-

just manually the items in the tub and start

the spin phase again.

Stubborn stains

For some stains, water and detergent is not

sufficient.

We recommend that you remove these stains

before you put the items in the appliance.

Special stain removers are available. Use the

special stain remover that is applicable to the

type of stain and fabric.

Detergents and additives

• Only use detergents and additives specially

made for washing machines.

• Do not mix different types of detergents.

• To help the environment, do not use more

than the correct quantity of detergent.

• Obey the instructions that you find on the

on packaging of these products.

• Use the correct products for the type and

colour of the fabric, the programme temper-

ature and the level of soil.

• If you use liquid detergents, do not set the

prewash phase.

• If your appliance has not the detergent dis-

penser with the flap device, add the liquid

detergents with a dosing ball.

Water hardness

If the water hardness in your area is high or

moderate, we recommend that you use a wa-

ter softener for washing machines. In areas

where the water hardness is soft it is not nec-

essary to use a water softener.

To know the water hardness in your area, con-

tact your local water authority.

Obey the instructions that you find on the

packaging of the products.

Care and cleaning

Warning!

Disconnect the appliance from the mains sup-

ply before you clean it.

External cleaning

Clean the appliance only with soap and warm

water. Fully dry all the surfaces.

Caution! Do not use alcohol, solvents or

chemical products.

Descaling

The water we use contains limescale. If it be-

comes necessary, use a water softener to re-

move limescales.

Use a special product made for washing ma-

chines. Obey the instructions that you find on

the packaging of the manufacturer.

Do this separately from the laundry wash.

Maintenance wash

With the low temperature programmes it is

possible that some detergent stays in the

drum. Make regularly a maintenance wash. To

do this:

• Empty the laundry from the drum.

• Set the hottest cotton wash programme

• Use a correct quantity of powder detergent

with biological properties.

After each wash, keep the door open for a

while to prevent mould and to let unpleasant

smells go out.

Drum

Regularly examine the drum to prevent lime-

scale and rust particles.

Only use special products to remove rust par-

ticles from the drum.

To do this:

www.zanussi.com

• Clean the drum with special product for

stainless steel.

• Start a short programme for cotton at the

maximum temperature with a small quantity

of detergent.

Door seal

Regularly examine

the seal and remove

all objects from the

inner part.

Cleaning the detergent dispenser

3. 4.

5. 6.

Cleaning the inlet valve filter

Cleaning the drain pump

Warning! Do not clean the drain filter if

the water in the appliance is hot.

www.zanussi.com

3. 4.

7. 8.

10.

Emergency drain

Because of a malfunction, the appliance can-

not drain the water.

If this occurs, do steps (1) through (9) of 'To

clean the drain pump'.

If necessary, clean the pump.

When you drain the water with the emergency

drain procedure, you must activate again the

drain system:

1. Put 2 litres of water in the main wash

compartment of the detergent dispenser.

2. Start the programme to drain the water.

Frost precautions

If the appliance is installed in an area where

the temperature can be less than 0 °C, remove

the remaining water from the inlet hose and

the drain pump.

1. Disconnect the mains plug from the mains

socket.

2. Close the water tap.

3. Remove the water inlet hose

4. Put the two ends of the inlet hose in a

container and let the water flow out of the

hose.

5. Empty the drain pump. Refer to the emer-

gency drain procedure

6. When the drain pump is empty, install the

inlet hose again.

Warning! Make sure that the

temperature is more than 0 °C before you

use the appliance again.

The manufacturer is not responsible for

damages caused by low temperatures.

Troubleshooting

The start of the appliance does not occur or it

stops during operation.

First try to find a solution to the problem (refer

to the table). If not, contact the service centre.

With some problems, the acoustic

signals operate and the display shows an

alarm code:

•

- The appliance does not fill with wa-

ter.

•

- The appliance does not drain the

water.

www.zanussi.com

•

- The appliance door is open or not

closed correctly.

Warning! Deactivate the appliance

before you do the checks.

Problem Possible solution

The appliance does not

start.

Make sure that the mains plug is connected in the mains socket.

Make sure that the appliance door is closed.

Make sure that there is not a damaged fuse in the household fuse box.

Make sure that the button Start/Pause has been pressed.

If the delay start is set, cancel the setting or wait for the end of the countdown.

Make sure that the programme knob is in the correct position.

Deactivate the Child Lock function if it is on.

The appliance does not

fill with water.

Make sure that the water tap is opened.

Make sure that the pressure of the water supply is not too low. For this informa-

tion, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter of the inlet hose and the filter of the valve are not clog-

ged. Refer to 'Care and cleaning'.

Make sure that the inlet hose has no kinks or bends.

Make sure that the connection of the water inlet hose is correct.

The appliance does not

drain the water.

Make sure that the sink spigot is not clogged.

Make sure that the water drain hose has no kinks or bends.

Make sure that the connection of the water drain hose is correct.

Set the drain programme if you set a programme without the drain phase.

Set the drain programme if you set an option which ends with water in the drum.

If above mentioned solutions do not help, contact the Service (as the filter of the

drain pump may be clogged).

The spin phase does

not operate

the washing cycle lasts

longer than usually.

Adjust manually the items in the drum and start the spin phase again. This prob-

lem may be caused by balance problems.

Set the spin programme.

Set the drain programme if you set an option which ends with water in the drum.

If above mentioned solutions do not help, contact the Service (as the filter of the

drain pump may be clogged).

There is water on the

floor.

Make sure that the couplings of the water hoses are tight and there are no water

leakages.

Make sure that the water inlet hose and the water drain hose has no damages.

Make sure you use the correct detergent and the correct quantity of it.

www.zanussi.com

Problem Possible solution

You cannot open the

appliance door.

Make sure that the washing programme is finished.

Set the drain or the spin programme if there is water in the drum.

The appliance makes

an unusual noise.

Make sure that the leveling of the appliance is correct. Refer to 'Installation in-

struction'.

Make sure that the packaging and/or the transit bolts are removed. Refer to 'In-

stallation instruction'.

Add more laundry in the drum. The load may be too small.

The appliance fills with

water and drain imme-

diately.

Make sure that the drain hose is in the correct position. The end of the hose may

be is too low. Refer to 'Installation instruction'.

The washing results are

not satisfactory.

Increase the detergent quantity or use a different detergent.

Use special products to remove the stubborn stains before you wash the laun-

dry.

Make sure that you set the correct temperature.

Decrease the laundry load.

After the check, activate the appliance. The

programme continues from the point of inter-

ruption.

If the problem occurs again, contact the Serv-

ice.

If the display shows other alarm codes, acti-

vate and deactivate the appliance. If the prob-

lem continues, contact the Service.

Service

We recommend the use of original spare

parts.

When contacting the Service, make sure that

these data are available. You can find the in-

formation on the rating plate: model (Mod.),

PNC (Prod.No.), Serial number (Ser.No.).

Technical information

Dimensions Width / Height / Depth 595 / 850 / 380 mm

Total depth 420 mm

Electrical connection: Voltage

Overall power

Fuse

Frequency

230 V

2000 W

10 A

50 Hz

Level of protection against ingress of solid particles and moisture en-

sured by the protective cover, except where the low voltage equip-

ment has no protection against moisture

IPX4

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Water supply

Cold water

Maximum load Cotton 5 kg

www.zanussi.com

Spin speed Maximum 1000 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

www.zanussi.com

www.zanussi.com/shop

155248310-A-492013

Zanussi ZWSE7100V User manual

Brand: Zanussi

Model: ZWSE7100V

Category: Washing machines

Type: User manual

Download PDF

report

Zanussi ZWSE7100V User manual

Zanussi ZWSE7100V User manual

Related papers