









> Lampcomponents:

 Mainlamp:  Halogen6V,6W.

 Energy-savinglamp:  4LED,operatinglife>100,000h.

> Protectivesystem:  IP44.

> Operation/storagetemperature: –20°C-+50°C.



> Beforeoperatingforthefirsttime,fullychargethelamp.

> Fullychargethelamp,beforeputtingawayinstorageforalongerperiodoftime.

> Chargingoptions:

 Plugpowerpack:  100-240V,50/60Hz.

 Automotivechargingplug: 12V-24VDC(max.2A).

Makecertainthatthecigarettelighteralsoremainsvolt-carryingwhentheignitionkeyisremoved.

Shouldthisnotbethecase,thenthechargingleadshouldbeconnectedthrougha3Afusedirectlytothe

 searchlightisequippedwithanautomaticvoltagechargemonitorÔpermanentchargeispossible!



Pressoperationselectioncontrolpushbutton1x:Themainlampisswitchedon

Pressoperationselectioncontrolpushbutton2x:Energysavinglamp(4LED)isswitchedon

Pressoperationselectioncontrolpushbutton3x:Themainportablesearchlightisswitchedoff

Theenergysavinglamp(LED)isautomaticallyactivatedwhenthefilamentofthemainlampbreakand

beforethedeepdischargeprotectionisactivated.

Onecanmanuallyswitchovertotheenergysavinglamp(4LED)beforethefinaldischargevoltageis

reached(remaininglightduration>2h).

Theportablesearchlightswitchesitselfoffassoonasthefinaldischargevoltageisreached.



sparinglamp(remaininglightduration>2h)



Repairworkmayonlybeperformedbyprofessionallytrainedelectricians!

Onlyoriginalreplacementpartsmaybeused!

Usedbatteriesshouldbedeliveredtorecycling,anddonotbelongwiththehouseholdgarbage!



1. Batterycapacitydisplaythrough1DUOLED.

2. Operationselectioncontrolswitch.

3. ChargesocketInput12V-24V.

4. Wallbracket.

> Carefullyremovethelampringwiththereflector

> Cautiouslyremovethelamp,forwards

> Graspthenewlampwithcloth,andinsertitintotheprescribedopening

>  I n s t a l l t h e r e f l e c t o r ; a l l t h e w h i l e p a y c a r e f u l a t t e n t i o n t h a t t h e o p e n i n g o f t h e g i v e n l a m p i s m o u n t e d i n h i s c o r r e c t 

 untilitstops.