EXSYS EX-3340 Datasheet

Category
Cable interface/gender adapters
Type
Datasheet

EXSYS EX-3340 is a bidirectional converter that enables data transfer between EIDE and Serial-ATA devices. It supports all DMA hard drives and boasts a data transfer rate of 66 to 133MB/s. Installation is simple, as the device connects directly to the IDE connector of the hard drive. The package includes a power cable for connection to the computer's power supply.

EXSYS EX-3340 is a bidirectional converter that enables data transfer between EIDE and Serial-ATA devices. It supports all DMA hard drives and boasts a data transfer rate of 66 to 133MB/s. Installation is simple, as the device connects directly to the IDE connector of the hard drive. The package includes a power cable for connection to the computer's power supply.

Serial-ATA
EX
-
3340
Konverter Serial
-
ATA zu EIDE oder EIDE zu Serial
-
ATA
Beschreibung :
Mit der EX
-
3340 können sie Daten von EIDE in Serial
-
ATA umwandeln oder auch von Serial
-
ATA zu EIDE. Der EX
-
3340 kann somit am
EIDE Port vom Motherboard angeschlossen werden. Da der EX
-
3340 auch Bi
-
Direktional funktioniert, kann man ihn an eine EIDE Fest-
platte anschließen und die Daten werden dann vom S
-
ATA Anschluss des Motherboard übermittelt.
Der EX
-
3340 ist die richtige Lösung
um EIDE Festplatten am S
-
ATA Port sowie S
-
ATA Festplatten am EIDE Port vom Motherboard anzuschließen
Merkmale :
Der EX
-
3340 ist ein Bi
-
Direktionaler Konverter von EIDE zu Serial
-
ATA oder Serial
-
ATA zu EIDE
Einfaches Installieren
Wird direkt auf den IDE Anschluss der Festplatte gesteckt
Es können alle DMA Festplatten verwendet werden
Es wird ein Powerkabel mitgeliefert das an das Netzteil vom Rechner angeschlossen wird.
Chip
-
Set :
Marvell 88i8030
Datentransfer
-
Rate :
Von 66 bis 133MB/Sek.
Anschlüsse :
1 x 7 Pin S
-
ATA Anschluss, 1 x 40 Pin EIDE Anschluss , Power Anschluss
Hardwaresysteme :
EIDE oder S
-
ATA
Abmessung / Gewicht :
150g
Lieferumfang :
EX
-
3340, Power Kabel
Arbeitstemperatur :
Luftfeuchtigkeit :
0 bis 55
0
C
5 bis 95%
Converter Serial
-
ATA to EIDE or EIDE zu Serial
-
ATA
Description:
With the EX
-
3340 if possible to convert the data from EIDE to Serial
-
ATA or also from Serial
-
ATA to EIDE. The EX
-
3340 works bi
-
directional so that you can connect to the EIDE port from the Motherboard but also to the EIDE connector from the hard disk.
It
is the
right choice for connect EIDE hard disk to the S
-
ATA port and also S
-
ATA hard disk to the EIDE port from your Motherboard.
Feature :
The EX
-3340 its a bi-
directional converter from EIDE to Serial
-
ATA or Serial
-
ATA to EIDE
Easy installation
Connect direct to the IDE connector from the hard disk
Can use all DMA hard disk
Power cable are included
Connectors :
1 x 7 Pin S
-
ATA connectors, 1 x 40 pin EIDE connector, Power connector
Hardware system :
EIDE or S
-
ATA
Size / Weight :
150g
Packaging contents :
EX
-
3340, Power cable
Chip
-
Set :
Marvell 88i8030
Data transfer rate :
From 66 to 133MB/Sek.
Operating Temperature :
Operating Humidity :
0 up to 55
0
C
5 up to 95%
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
Serial
-
ATA Verbindung
EIDE Verbindung vom MB
S-
ATA Hard disk
Betriebssysteme unabhängig / usefull for all OS
  • Page 1 1

EXSYS EX-3340 Datasheet

Category
Cable interface/gender adapters
Type
Datasheet

EXSYS EX-3340 is a bidirectional converter that enables data transfer between EIDE and Serial-ATA devices. It supports all DMA hard drives and boasts a data transfer rate of 66 to 133MB/s. Installation is simple, as the device connects directly to the IDE connector of the hard drive. The package includes a power cable for connection to the computer's power supply.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages