HPI Racing Maverick iON User manual

Page is loading ...

2

HAVE FUN! But please read this ﬁ rst !!

We know you will have great fun with your model, but to get the best from your purchase please read this information

BEFORE you operate the model.

Table of contents

Page

Warranty 2

Speciﬁ cations 3

Recommended Tools 3

Safety Precautions 3

Items required for operation 3

Charging the battery pack 4

Installing the battery pack 4

Turning on the power 4

Turning off the power 4

Transmitter 5

Trim Setup 6

Electronic Speed Control Setup 6

Driving 7

Maintenance after driving 7

Trouble Shooting 8

Parts Listing 9

Exploded Diagrams 38-39

90 Day Component Warranty

We want you to enjoy your purchase, but please read this ﬁ rst!

This product is covered by a 90 day component warranty from date of purchase. If any part of the product fails as a

result of faulty manufacture during this period then we will repair or replace that part at our discretion.

We do not operate a new for old warranty once the product has been used.

Please note this product is not a toy and it is recommended that children 14 and under are supervised by an adult. It is

the responsibility of the parent or guardian to ensure minors are given appropriate guidance and supervision.

If you suspect there is a problem with the product, for whatever reason, it is the user’s responsibility to investigate and

take steps to rectify the problem before further damage occurs.

Not Covered By Warranty

This is a sophisticated, high performance model and should be treated with care and respect. Every effort has been

made to make this product as strong and durable as possible, however due to the nature of this product, it is still

possible to break or damage parts through crashing or extreme use. Components damaged as a result of crash

damage, improper use, lack of maintenance or abuse are not covered by the warranty.

How to Claim Against your Warranty

For warranty claims please ﬁ rst contact your supplying retailer. Do not return the product to your distributor without

their prior approval. You may not need to return the product in full, only the damaged component along with a copy of

your purchase receipt. In many cases it is faster and more cost effective for the user to ﬁ t the replacement part(s) to

the product & therefore we reserve the right to supply parts only in these instances.

Any returned component that is inspected by your distributor and found to have an invalid warranty claim may be

subject to an inspection and handling fee before it can be returned. Any repairs required as a result of neglect or

misuse will be charged before any work is carried out on the product. If you decide not to have any work carried out

the distributor reserves the right to charge a handling and a shipping fee.

Please attach your proof of purchase in the manual as you may need it again in the future.

3

Safety precautions

This product is an authentic radio controlled vehicle (RC vehicle) and it is not a toy. Read and understand this

instruction manual thoroughly before running the model. If you are not familiar with RC vehicles, we recommend that

you ask someone familiar with RC vehicles for advice.

Never connect the rechargeable drive battery in the reverse polarity or disassemble the battery. If the drive battery is

used in the wrong way, high current can be generated and it is very dangerous.

Never run RC models near people or animals, or on public streets or highways. This could cause serious accidents,

personal injuries, and/or property damage.

Make sure the mains power socket used for the charger is readily accessible and never left plugged in when not in

use.

If you are using Rechargeable AA’s for the Transmitter please make sure you also purchase a suitable charger for this

battery type.

Length 255mm 275mm 249mm 255mm 249mm 305mm

Width 185mm 168mm 174mm 182mm 168mm 178mm

Height 105mm 110mm 95mm 97mm 107mm 110mm

Wheel Base 165mm 165mm 165mm 165mm 165mm 165mm

Drive System 4WD Shaft Drive

Gear Ratio 8.75:1

Diameter of Wheel 22mm 22mm 22mm 22mm 25mm 22mm

Width of Wheel 47mm 33mm 47mm 47mm 20mm 20mm

Motor MM-28 370 Size

Servo Maverick MS-28

Receiver MSRS-248 2in1 Fwd/Rev ESC/Rx

Battery ELEMENTS 1200mAh Ni-Mh

5.5

mm

7

mm

Recommended Tools

These tools are not included with the product but are recommended for use whilst working with this vehicle

Scissors, Mini Screwdrivers, Hexagonal Screwdrivers 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4-Way Cross Wrench (Small),

Side Cutters, Needle Nose Pliers, Paperclip, Grease, Brush, CA Glue, Spray Lubricant, Cleaning Spray.

1. 5

mm

2.0

mm

2.5

mm

3.0

mm

Items required for operation

4 * AA Batteries for the Transmitter

DISCONNECT THE BATTERY

PACK AFTER USE!

4

Charging the battery pack

Always use the included charger for the included battery pack. Charging time for an empty battery pack is about 3

hours. Do not charge the battery pack longer than 4 hours to avoid overheating and battery damage. Always remove

the charger from the mains socket when not in use

Cautions

• This charger can be used only for the battery pack included in this kit.

• Do not charge the battery pack for longer than 4 hours. Overcharging generates excessive heat and will damage

the battery pack.

• Use the charger with adult supervision and do not leave unattended. Do not use the charger near

water or when wet.

• Do not use the charger if the wire is frayed or worn. If the wire is frayed or worn a short circuit can

cause a ﬁ re or burns.

• If you are unsure of the charge of the battery pack, use it in the vehicle

until the vehicle slows, leave to cool and then recharge.

1. Select your regions electrical mains plug and attach it to the charger. Always use

the correct mains plug version for your country.

2. Connect the charging socket to the supplied battery packs power plug. The

connectors are sided and have a clip to secure it in place. Do not force together

and always check you have the connection the right way round.

3. The charger will automatically start to charge your battery pack. Do not leave

connected for more than 3 hours on a ﬂ at battery pack and always observe the

cautions above.

DISCONNECT THE BATTERY

PACK AFTER USE!

Installing the battery pack

You need to insert the

battery pack in the open

section for the battery. Use

the strap provided to place

on top of the battery and

then use the retaining clip to

secure the battery.

Once fastened and secured

please connect the battery

plug into the speed controller

plug noting correct polarity.

Red to red, black to black.

Turning on the power

Turn on transmitter ﬁ rst and then turn on receiver.

Turn on the transmitter switch and the LED battery indicator will light up.

Turn on the receiver. The automatic set-up of the factory set speed control should

have been completed. If you experience any problems with the speed control settings refer to the Electronic Speed

Control Section for correct setup information.

Turning off the power

Turn off receiver ﬁ rst and then turn off transmitter.

If you switch off the transmitter ﬁ rst before the R/C car, you may lose control of the R/C car.

• Turn off the receiver switch.

• Turn off the transmitter switch.

• Disconnect the battery connector from the speed control connector.

5

Transmitter

Your Transmitter is an advanced controller designed for the beginner to be easy to use and tune. You will need to

follow the steps below to ensure you prepare the controller correctly for use and understand the adjustment

possibilities available.

Preparing the transmitter

The function switches on the transmitter

Throttle Trigger

Open the battery holding

tray to expose the empty

battery slots.

Insert 4 AA batteries into

the marked spaces. Please

note the correct direction of

the batteries

Incorrect battery insertion could

damage the transmitter

2.4Ghz technology has done

away with the need for long

extendable aerials. The Aerial

on your transmitter is located

internally

1. Steering Trim

2. Power Switch

3. Steering End Point Dial (left/right lock)

4. Steering Reverse Switch

5. Power LED

6. Steering Control

7. Throttle Trigger

8. Bind Button

• Pull the trigger to go

forwards and speed up

• Push the trigger forward to

brake

• Push again for reverse

Steering Wheel

Turn the steering wheel to the left or

right to make the vehicle turn left or

right

Reverse Switch

You can reverse the direction travel on the steering by using this switch.

Example: When the car is driving away from you and a left input is made on the Transmitter but the car

steers Right, you can use this switch to reverse the signal to gain the correct steering control.

Dual Rates

The dual rate settings adjust the

maximum degree of movement from the

servo or ESC on that channel.

Clockwise is full movement.

Counter-Clockwise (Zero) is very little

movement.

Power LED’s

The Red LED Light shows if the installed AA

batteries have sufﬁ cient charge.

The RED LED will ﬂ ash if the AA batteries need

replacing.

6

Trim Setup

If the front tyres are not pointing straight forward with the transmitter on, adjust the steering trim. Then if needed, make

ﬁ ne adjustments with the steering trim whilst driving the vehicle.

Binding the Transmitter and Receiver

You may need to setup your transmitter to ‘bind’ with the receiver if you change to a new receiver or for any reason

lose signal.

Turn on the Transmitter power while holding the “Bind” button on the Transmitter. The LED should start ﬂ ashing. It will

ﬂ ash and stay in bind mode for 20 seconds.

Turn on the Reciever/ESC. When the Receiver LED becomes solid the binding process is completed.

MSRS-248 - 2 in 1 Receiver/ESC 2.4GHz

Technical Information

20A drive FET’s & 15A Reverse FET’s

Case dimensions: 35.1mm*25.3mm*14mm

Silicone Wire 22 Gauge

Weight 7.4g with connectors and switch

BEC Voltage 6.0V

Features

6.0Volt — 8.4Volt Power Input

Waterproof

High Frequency Drive System

Forward, Reverse & Brake Linear Operation

Automatic Setup System

Over Current Protection

Thermal Protection

Low Voltage Protection

LED

20 Turn 370 Brushed Motor Limit

Electronic Speed Control Setup

1. With the speed control switch set to off, plug in a suitable battery pack.

2. Switch the transmitter on

3. Turn on the speed control

4. To indicate the speed control is working correctly its LED will lBlink 3 times and then go solid.

5. Your speed control is fully installed and ready to use.

Steering Trim

When you install a servo or remove the servo horn for any reason, always make sure the servo

is in the neutral position by turing on your car without the servo horn in place. Adjust the Servo

Horn and linkage so they are as close to 90 degrees as possible. Be sure that the “Trim” is in

the central position.

Push forwards to trim to the right and pull backwards to trim to the left.

If the wheels point left, push forwards If wheels point right, pull backwards.

If they point straight no adjustment

required.

7

Driving

Driving an R/C car can be very difﬁ cult to master. We want you to have fun with your RC vehicle but please read the

cautions detailed below followed by some basic tips to help you understand how to use your RC vehicle for the ﬁ rst

time.

• Drive the vehicle in a very large space, especially until you get the feel of driving the vehicle.

• Do not drive on public streets or highways. This could cause serious accidents, personal injuries and/or property

damage.

• Do not drive near members of the general public that could be placed at risk of injury.

• Do not drive in water or sand.

• 2.4Ghz radio frequency only functions in line of sight. If you drive behind a solid object or around a corner and lose

sight of the vehicle you may lose control of the car.

If you hold full throttle on the transmitter, the vehicle will keep accelerating and run very fast. It is difﬁ cult to steer the

vehicle running at high speeds. Drive the vehicle slowly by only pulling the throttle trigger a small amount to get used

to how fast the car can go.

When the car is running towards the driver, the directions of the steering wheel are reversed.

Once you become conformable driving the vehicle, practice driving on a track with cones.

Keep practising until you feel comfortable with the steering, throttle and brake at low speeds.

Once you are feeling comfortable try the above using reverse.

When you have mastered the basics you will be able to drive at higher speeds in a more controlled fashion.

Allow the car to cool down for 15 minutes between each run

DISCONNECT THE BATTERY PACK

AFTER USE!

Maintenance after driving

Proper maintenance is very important. Make sure to always perform appropriate maintenance after driving so that you

can enjoy driving without problems next time.

Completely remove all dirt and debris from the vehicle, especially in the suspension, drive shafts and steering parts.

Inspect each part and screws for loosening, missing parts or damages.

You should always make sure your wheels are tight and parts move freely after and before use.

Driving in wet conditions

This vehicle is designed to provide water protection for the on-board radio system components so it can be driven in

wet conditions. The vehicle is not designed to be completely submerged in water. Driving in wet conditions will require

additional maintenance.

Notes:

Never drive the vehicle in stormy conditions where lightning could be present. The transmitter is not waterproof,

always keep it protected from rain and water.

Remove all water/mud and dry the vehicle completely after driving. Check the vehicle for trapped water in the tyres,

transmission etc. Some metal parts like bearings and hinge pins will need lubrication after driving in wet or damp

conditions. The electric motor is not designed to be submerged in water. If water gets inside it can reduce the life of

the motor.

Most LiPo battery packs are not designed to operate in wet conditions. Consult the instruction manual or manufacturer

for limitations.

After running in water, dry off any water from the ESC and connectors.

8

Problem Cause Remedy

The vehicle does not move Transmitter or receiver is off Turn on both the transmitter and

receiver

Batteries are not placed correctly in

the transmitter

Place batteries in the transmitter

properly

The main battery is not charged

enough

Charge the main battery

The vehicle does not follow your

driving inputs

Transmitter or receiver is off Turn on both the transmitter and

receiver

Transmitter reverse switches are set

incorrectly

Check the reverse switch

settings

Transmitter End Point

Adjustments (EPA) are set

incorrectly

Check that your EPA Dials on

your transmitter.

Weak batteries in either the

transmitter or the car

Replace batteries in the

transmitter and recharge the

main battery.

The front and rear wheels rotate in

opposing directions

Incorrect user differential

placement

Insert the differential the

correct way

Trouble Shooting

Please read this section if you have any fault trying to operate the vehicle

If you encounter any other fault whilst operating the vehicle please contact your local hobby shop or alternatively

contact your local distributor.

9

Part

Number

Description Part

Number

Description

MV22029 Body Clips (8Pcs) (ALL Strada and EVO) MV28049 Body Post 2Pcs (Ion XB)

MV22714

Multi-Region 300mAh Mains Charger for 7.2v

Battery packs (Tamiya/Mini-Tamiya)

MV28051 Composite Rear Wing (Ion XB, DT)

MV25032 E-Clip M2.5 (8pcs) MV28052

MV25034 Nyloc Nut M2.5 (8pcs) MV28055 1/18 Monster Truck Wheel & Tyre Assembly (Ion MT)

MV25037 Button Head Screw M3x8 (8pcs) MV28057 MBP - 28 7.2V 800mAh Ni-MH Battery

MV28001 Main Composite Chassis (ALL Ion) MV28058 MM - 28 370 Motor

MV28002 Complete Shock Absorber 2Pcs (ALL Ion) MV28059 Battery Connector Adapter Tamiya to Mini Tamiya

MV28003 Steering Arms 2Pcs (ALL Ion) MV28060 Servo Horn & Screw (ALL Ion)

MV28004 Rear Hub Carrier 2Pcs (ALL Ion) MV28061 MS - 28 Servo iON

MV28005 Front Castor Block 2Pcs (ALL Ion) MV28062 MTX-248 2.4Ghz 2Ch iON Transmitter

MV28006 Suspension Arm Fr or Rr 2Pcs (ALL Ion) MV28063 Motor Heatsink (ALL iON)

MV28007 Wheel Axle 2Pcs (ALL Ion) MV28064 Shims 2.6x6x0.5mm (ALL iON)

MV28008 Dogbones 2Pcs (ALL Ion) MV28065 Truggy Painted Body Blue with Decals (iON XT)

MV28009 Steering Ackermann Link 1Pc (ALL Ion) MV28066 Buggy Painted Body Blue with Decals (iON XB)

MV28010 Motor Mount & Gear Cover 1Pc (ALL Ion) MV28067 Short Course Painted Body Blue with Decals (iON SC)

MV28011

Composite Top Deck & Shock Towers 1Pc

(iON XT/XB/MT/SC/RX)

MV28068

Monster Truck Painted Body Blue with Decals

(iON MT)

MV28012 Differential Case 1Pc (ALL Ion) MV28069 Desert Truck Painted Body Blue with Decals (iON DT)

MV28013 Spur Gear 45 Tooth 1Pc (ALL Ion) MV28070 Rally Painted Body Blue with Decals (iON RX)

MV28014 Plastic Pinion Gear 13 Tooth 2Pcs (ALL Ion) MV28071 Clear Truggy Body with Decals (iON XT)

MV28015 Crownwheel & Pinion Gear 1Pc (ALL Ion) MV28072 Clear Buggy Body with Decals (iON XB)

MV28016 Complete Gear Diff. Fr or Rr (ALL Ion) MV28073 Clear Short Course Body with Decals (iON SC)

MV28017 Steering Link Set (ALL Ion) MV28074 Clear Monster Truck Body with Decals (iON MT)

MV28018 Composite Diff. Outdrives 2Pcs (ALL Ion) MV28075 Clear Desert Truck Body with Decals (iON DT)

MV28019 Servo Saver Set (ALL Ion) MV28076 Clear Rally Body with Decals (iON RX)

MV28021 Centre Driveshaft (ALL Ion) MV28077 Driver head and Cage details (iON DT)

MV28022 Main Bumper Fr & Rr 2Pcs (ALL Ion) MV28078 Driver Platform (iON DT)

MV28023 Ball Stud 2.5x4.5mm 6Pcs MV28079 Wheels and Tyres (iON DT/SC)

MV28024 Pin 2x22mm 6Pcs MV28080 Roll Cage (iON DT)

MV28025 Pin 1.5x16mm 6Pcs MV28081 Composite Top Deck & Shock Towers 1Pc (iON DT)

MV28026 Lower Hinge Pin Fr & Rr 2 Pcs (ALL Ion) MV28082 Body Post Set (iON RX)

MV28028 Ball Bearing 8 x 12 x 3.5mm 6Pcs MV28083 Wheels and Tires (iON RX)

MV28029 Ball Bearing 4 x 8 x 3mm 6Pcs MV28099 Battery Cover 1Pc (ALL iON)

MV28030 Ball Bearing 10 x 6 x 3mm 8Pcs MV28100 Front Body Posts 2P (iON SC)

MV28031 Diff. Gear Set (ALL Ion) MV28101 MSRS - 248 2 in 1 Receiver/ESC 2.4GHz

MV28032 Button Head Screw M2.5 x 20mm 6Pcs

MV28033 Button Head Screw M2.5 x 14mm 6Pcs

MV28034 Button Head Screw M2.5 x 10mm 6Pcs

MV28035 Button Head Screw M2.5 x 8mm 6Pcs

MV28036 Button Head Screw M2.5 x 6mm 6Pcs

MV28037 Flat Head Screw M3 x 6mm 6Pcs

MV28038 Cap Head Screw M2 x 6mm 6Pcs

MV28039 Flat Head Screw M2 x 8mm 6Pcs

MV28040 Grub Screw M3 x 3mm 6Pcs

MV28041 Flanged Lock Nut M3 6Pcs

MV28042 Short 2.4 GHz Black Antenna Pipe 3Pcs

MV28047 1/18 Truggy Wheel & Tyre Assembly (Ion XT)

MV28048 Large Bumper 1Pc (Ion MT)

Parts Listing (For Exploded diagram see Pages ??-??)

10

Part

Number

Description Part

Number

Description

MV28043 Metal Pinion Gear 14 Tooth 2Pcs (ALL Ion) MV28091 Aluminium Dogbones 2pcs (ALL iON)

MV28044 Metal Pinion Gear 13 Tooth 2Pcs (ALL Ion) MV28092 Aluminium Centre Driveshaft 2pcs (ALL iON)

MV28085 Aluminium Diff Casing 1pc (ALL iON) MV28093 Aluminium Motor Mount (ALL iON)

MV28086 Aluminium Shock Set 2pcs (ALL iON) MV28094 Aluminium Servo Saver Set (ALL iON)

MV28087 Aluminium Steering Arms 2pcs (ALL iON) MV28095 Aluminium Servo Mounts 2pcs (ALL iON)

MV28088 Aluminium Rear Hub Carriers 2pcs (ALL iON) MV28096 Aluminium Diff Outdrives 2pcs (ALL iON)

MV28089 Aluminium Front Caster Block L/R (ALL iON) MV28097 Aluminium Steering Ackermann Link 1Pc (ALL iON)

MV28090

Aluminium Main Bumper Fr & Rr 2pcs

(ALL iON)

MV28098 Aluminium Diff Pinion Gear 2pcs (ALL iON)

Optional Parts Listing

Page is loading ...

39

MV28070 - Painted

MV28076 - Clear

MV28069 - Painted

MV28075 - Clear panels

MV28077 - Driver & Cage

MV28078 - Platform

MV28066 - Painted

MV28072 - Clear

MV28065 - Painted

MV28071 - Clear

MV28068 - Painted

MV28074 - Clear

MV28067 - Painted

MV28073 - Clear

MV28083

Wheels and Tires Pr (iON RX)

MV28079

Wheels and Tires Pr (iON DT/SC)

MV28079

Wheels and Tires Pr (iON DT/SC)

MV28055

Wheels and Tires Pr (iON MT)

MV28052

Wheels and Tires Pr (iON XB)

MV28047

Wheels and Tires Pr (iON XT)

40

HOBBY PRODUCTS INTERNATIONAL EUROPE LTD.

19 WILLIAM NADIN WAY

SWADLINCOTE, DERBYSHIRE, DE11 OBB, UK

Tel: +44 (0)1283 226570

WWW.MAVERICK-RC.COM

HPI Racing Maverick iON User manual

HPI Racing Maverick iON User manual

in other languages

Related papers

Other documents