1 — English
SAVE THIS MANUAL FOR FUTURE REFERENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
Your charger has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT DUAL CHEMISTRY
BATTERY CHARGER
CHARGEUR DE PILES À COMPOSITION
CHIMIQUE DOUBLE DE 18 V
CARGADOR DE BATERÍA PARA DOS TIPOS
DE COMPUESTOS QUÍMICOS DE 18
P116
Cette chargeur a été conçue et fabriquée conformément à
nos strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenue, elle vous donnera des
années de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci de votre achat.
Su cargador ha sido diseñada y fabricada de conformidad con
las estrictas normas para brindar fiabilidad, facilidad de uso y
seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos su compra.
BATTERIES SOLD SEPARATELY
PILES VENDUS SÉPARÉMENT
LAS BATERÍAS SE VENDEN POR SEPARADO
Charging
En charge
Cargando
Power
Alimentation
Corriente
Defective
Défectueux
Defectuoso
Testing
Evaluer
Evaluar
Risk of injury, electric shock, re,
and damage. Refer to Operator’s
Manual for size, type, and number of batteries to be
charged. Other batteries may burst.
WARNING
Maintenance Charge
Chargé de maintien
Carga de mantenimiento
Charged / Energy Save
Charge/économie d'énergiea
Cargada/ahorro de energía
2 — English
Introduction ..................................................................................................................................................................... 2
Warranty .......................................................................................................................................................................... 2
Important Safety Instructions .......................................................................................................................................... 3
Symbols ........................................................................................................................................................................... 4
Features ........................................................................................................................................................................... 5
Assembly ......................................................................................................................................................................... 5
Operation ......................................................................................................................................................................6-7
Maintenance .................................................................................................................................................................... 8
Figure numbers (illustrations) .......................................................................................................................................... 9
Parts Ordering / Service ................................................................................................................................... Back page
TABLE OF CONTENTS
INTRODUCTION
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have
been given top priority in the design of this product making it easy to maintain and operate.
WARRANTY
RYOBI® POWER TOOL - LIMITED THREE YEAR WARRANTY AND 90 DAY EXCHANGE POLICY
One World Technologies, Inc., warrants its RYOBI®
power tools with the following conditions:
90-DAY EXCHANGE POLICY: During the first 90 days after date of purchase, you may either request service under this
warranty or you may exchange any RYOBI® power tool which does not work properly due to defective workmanship or
materials by returning the power tool to the dealer from which it was purchased. To receive a replacement power tool
or requested warranty service, you must present proof of purchase and return all original equipment packaged with the
original product. The replacement power tool will be covered by the limited warranty for the balance of the three year
period from the date of the original purchase.
WHAT THIS WARRANTY COVERS: This warranty covers all defects in workmanship or materials in your RYOBI® power
tool for a period of three years from the date of purchase. With the exception of batteries, power tool accessories are
warranted for ninety (90) days. Batteries are warranted for three years.
HOW TO GET SERVICE: Just return the power tool, properly packaged and postage prepaid, to an Authorized Service
Center. You can obtain the location of the Service Center nearest you by contacting a service representative at One
World Technologies, Inc., P.O. Box 1207, Anderson, SC 29622-1207, by calling 1-800-525-2579 or by logging on to
www.ryobitools.com. When you request warranty service, you must also present proof of purchase documentation, which
includes the date of purchase (for example, a bill of sale). We will repair any faulty workmanship, and either repair or replace
any defective part, at our option. We will do so without any charge to you. We will complete the work in a reasonable time,
but, in any case, within ninety (90) days or less.
WHAT’S NOT COVERED: This warranty applies only to the original purchaser at retail and may not be transferred. This
warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defects resulting
from misuse, abuse, neglect, alteration, modification or repairs by other than Authorized Service Centers. One World
Technologies, Inc. makes no warranties, representations or promises as to the quality or performance of its power tools
other than those specifically stated in this warranty.
ADDITIONAL LIMITATIONS: Any implied warranties granted under state law, including warranties of merchantability or
fitness for a particular purpose, are limited to three years from the date of purchase. One World Technologies, Inc. is not
responsible for direct, indirect, or incidental damages, so the above limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
3 — English
Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes resulting in pos-
sible serious injury.
An extension cord should not be used unless
absolutely necessary. Use of improper extension cord
could result in a risk of fire and electric shock. If extension
cord must be used, make sure:
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on charger.
b. That extension cord is properly wired and in good
electrical condition; and
c. That wire size is large enough for AC ampere rating
of charger as specified below:
Cord Length (Feet) 25’ 50’ 100’
Cord Size (AWG) 16 16 16
NOTE: AWG = American Wire Gauge
Do not operate charger with a damaged cord or plug,
which could cause shorting and electric shock. If damaged,
have the charger replaced by an authorized serviceman.
Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way.
Take it to an authorized serviceman for electrical check
to determine if the charger is in good working order.
Do not disassemble charger. Take it to an authorized
serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
Unplug charger from outlet before attempting any
maintenance or cleaning to reduce the risk of electric
shock.
Disconnect charger from the power supply when
not in use. This will reduce the risk of electric shock or
damage to the charger if metal items should fall into the
opening. It also will help prevent damage to the charger
during a power surge.
Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also
to prevent misuse of the product and possible injury.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Fail-
ure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
Before using charger, read all instructions and caution-
ary markings in this manual, on charger, battery, and
product using battery to prevent misuse of the products
and possible injury or damage.
WARNING:
Charge only one nickel-cadmium or lithium-ion recharge-
able battery at a time. Other types of batteries may burst,
causing personal injury or damage. For compatible
battery packs see tool/appliance/battery pack/charger
correlation supplement 987000-432.
Do not use charger outdoors or expose to wet or damp
conditions. Water entering charger will increase the risk
of electric shock.
Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of
fire, electric shock, or injury to persons. Following this
rule will reduce the risk of electric shock, fire, or serious
personal injury.
Do not abuse cord or charger. Never use the cord to
carry the charger. Do not pull the charger cord rather than
the plug when disconnecting from receptacle. Damage
to the cord or charger could occur and create an electric
shock hazard. Replace damaged cords immediately.
Make sure cord is located so that it will not be stepped
on, tripped over, come in contact with sharp edges
or moving parts or otherwise subjected to damage or
stress. This will reduce the risk of accidental falls, which
could cause injury, and damage to the cord, which could
result in electric shock.
Keep cord and charger from heat to prevent damage
to housing or internal parts.
Do not let gasoline, oils, petroleum-based products,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy plastic.
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS - DANGER: TO REDUCE RISK OF FIRE
OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS.
This manual contains important safety and operating instructions for battery charger P116.
2. Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product
using battery.
3. CAUTION: To reduce the risk of injury, charge only lithium-ion or nickel-cadmium rechargeable batteries. Other types
of batteries may burst, causing personal injury or damage.
IMPORTANT SAFETY INSTRUCTIONS
4 — English
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Wet Conditions Alert Do not expose to rain or use in damp locations.
V Volts Voltage
Hz Hertz Frequency (cycles per second)
W Watt Power
Alternating Current Type of current
Direct Current Type or a characteristic of current
SYMBOL NAME
DESIGNATION/EXPLANATION
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SYMBOLS
CALIFORNIA PROPOSITION 65
WARNING:
This product contains chemicals, including lead, known to the state of California to cause birth defects and other
reproductive harm. Wash hands immediately after handling.
5 — English
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Charger
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
FEATURES
ASSEMBLY
PRODUCT SPECIFICATIONS
Battery Voltage .......................................................................................................................................................18 Volt DC
Charger Input........................................................................................................................................120 V, 60 Hz, AC only
Charge Rate ........................................................................................................................................approximately 8 hours
NOTE: Charge time is dependent on the type of battery pack.
KNOW YOUR CHARGER
See Figure 1, page 9.
The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIAGNOSTIC FEEDBACK
LEDs provide feedback to indicate whether the battery pack
is charging, fully charged, or defective.
DUAL CHEMISTRY
The battery charger can charge either lithium-ion or nickel-
cadmium batteries.
ENERGY SAVE MODE
Energy Star qualified systems enter Energy Save Mode when
not charging or when maintaining batteries. This allows the
charger to conserve energy by charging batteries only as
needed, and also protects the cells and maximizes the life
of your batteries.
ENERGY STAR QUALIFIED
This battery charger meets the Energy Star energy- efficiency
guidelines set by the U.S. Environmental Protection Agency
and the U.S. Department of Energy. Battery chargers meet-
ing this standard use an average of 35% less energy than
conventional battery chargers.
6 — English
OPERATION
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATIONS
You may use this tool for the following purpose:
Charging Ryobi 18 V lithium-ion or NiCd batteries
CAUTION:
If at any point during the charging process none of the
LEDs are lit, remove the battery pack from the charger
to avoid damaging the product. DO NOT insert another
battery. Return the charger and battery to your nearest
service center for service or replacement.
CAUTION:
Charge in a well ventilated area. Do not block charger
vents. Keep them clear to allow proper ventilation.
CHARGING
See Figure 2, page 9.
Battery packs are shipped in a low charge condition to
prevent possible problems. Therefore, you should charge
them before first use. If the charger does not charge the
battery pack under normal circumstances, return both the
battery pack and charger to your nearest repair center for
electrical check.
Make sure the power supply is normal household voltage,
120 volts, AC only, 60 Hz.
Connect the charger to a power supply.
Attach the battery pack to the charger by aligning the
raised ribs on the battery pack with the grooves in the
charger, then slide the battery pack and charger together.
Press down on the charger to be sure contacts on
the battery pack engage properly with contacts in the
charger. Latches should snap into place to ensure charger
is correctly connected.
Do not place the charger in an area of extreme heat or
cold. It will work best at normal room temperature.
NOTE: The charger and battery pack should be placed
in a location where the temperature is more than 50°F
but less than 96°F.
The battery pack may become slightly warm to the
touch while charging. This is normal and does not
indicate a problem.
After charging is complete, the green LED will fade while
the charger is in Energy Save Mode and the battery is
fully charged.
Charger will periodically wake from Energy Save mode to
ensure the battery pack remains in a fully charged state.
To remove the battery pack from the charger, depress
the latches on the sides of the battery pack and separate
battery from charger.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may
become hot. A hot battery pack may be placed directly onto
the charger port but charging will not begin until the battery
temperature cools to within acceptable temperature range.
When a hot battery pack is placed on the charger, the red
LED will begin flashing and the green LED will be off. When
the battery pack cools to approximately 120°F (40°C), the
charger will automatically begin charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger
port but charging will not begin until the battery temperature
warms to within acceptable temperature range. When a cold
battery pack is placed on the charger, the red LED will begin
flashing and the green LED will be off. When the battery
pack warms to approximately 32°F (0°C), the charger will
automatically begin charging.
7 — English
OPERATION
LED FUNCTIONS
MODE BATTERY PACK
RED
LED
GREEN
LED
ACTION
Power
Without
battery pack
On
Off Ready to charge battery pack.
Testing
Hot battery pack
Flashing
Off
When battery pack reaches cooled temperature, charger
begins fast charge mode.
Cold battery pack
When battery pack reaches warmed temperature, char-
ger begins fast charge mode.
Deeply discharged
Charger conditions battery until normal voltage is
reached, then begins fast charge mode.
Defective
Defective
Fading
Off Battery pack or charger is defective.
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED status repeats a
second time, try charging a different battery.
• If a different battery charges normally, dispose of the defective pack ((see battery pack operator’s manual).
• If a different battery also indicates “Defective,” the charger may be defective.
Charging
Fast charging
On
Flashing
Battery is being charged.
Charged
Battery full Off
On
Charging is complete; charger maintains charge mode.
Energy
Save Mode
Battery full /
Energy Save mode
Off
Fading
Battery pack is fully charged and charger is in Energy Save
mode.
8 — English
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 9 AFTER
FRENCH AND SPANISH LANGUAGE SECTIONS
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
STORAGE
Always remove the battery pack before storing the charger
or any time the charger is unplugged.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
9
Charging
En charge
Cargando
Charged
Charge
Cargado
Energy Save Mode
Mode d’économie d’énergie
Modo de ahorro de energía
Power
Alimentation
Corriente
Defective
Défectueux
Defectuoso
Testing
Evaluer
Evaluar
Risk of injury, electric shock, re,
and damage. Refer to Operator’s
Manual for size, type, and number of batteries to be
charged. Other batteries may burst.
WARNING
Charging
En charge
Cargando
Power
Alimentation
Corriente
Defective
Défectueux
Defectuoso
Testing
Evaluer
Evaluar
Risk of injury, electric shock, re,
and damage. Refer to Operator’s
Manual for size, type, and number of batteries to be
charged. Other batteries may burst.
WARNING
Maintenance Charge
Chargé de maintien
Carga de mantenimiento
Charged / Energy Save
Charge/économie d'énergiea
Cargada/ahorro de energía
A - LED label (étiquette de LED, etiqueta de LED)
B - Red LED (témoin rouge, indicador de rojo)
B
C
A
Fig. 1
A - Charger (chargeur, cargador)
B - Battery pack (bloc-piles, paquete de baterías)
Fig. 2
B
C - Green LED (témoin vert, indicador de verde)
C - Depress both latches to release (appuyer sur les deux verrous pour
libérer, oprima ambas presillas para soltarlo)
Charging
En charge
Cargando
Power
Alimentation
Corriente
Defective
Défectueux
Defectuoso
Testing
Evaluer
Evaluar
Risk of injury, electric shock, re,
and damage. Refer to Operator’s
Manual for size, type, and number of batteries to be
charged. Other batteries may burst.
WARNING
Maintenance Charge
Chargé de maintien
Carga de mantenimiento
Charged / Energy Save
Charge/économie d'énergiea
Cargada/ahorro de energía
A
C
10
988000-502
7-14-11 (REV:02)
• PARTS AND SERVICE
Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the
product data plate.
• MODELNUMBER ____________________
• SERIALNUMBER ____________________
• HOWTOOBTAINREPLACEMENTPARTS:
Replacement parts can be purchased online at www.ryobitools.com or by calling 1-800-525-2579. Replacement
parts can also be obtained at one of our Authorized Service Centers.
• HOWTOLOCATEANAUTHORIZEDSERVICECENTER:
Authorized Service Centers can be located online at www.ryobitools.com or by calling 1-800-525-2579.
• HOWTOOBTAINCUSTOMERORTECHNICALSUPPORT:
To obtain Customer or Technical Support please contact us at 1-800-525-2579.
• PIÈCES ET SERVICE
Avant de faire la demande de service ou l’achat de pièces de remplacement, veuillez obtenir le numéro de série du modèle à partir
de la plaque de données du produit.
• NUMÉRODEMODÈLE _____________________
• NUMÉRODESÉRIE _____________________
• COMMENTOBTENIRLESPIÈCESDEREMPLACEMENT:
Lespiècesderemplacementpeuventêtreachetéesenlignesurlesitewww.ryobitools.com ou par téléphone au 1-800-525-2579.
Lespiècesderemplacementpeuventêtreobtenuesàundenoscentresdeserviceautorisés.
• COMMENTTROUVERUNCENTREDESERVICEAUTORISÉ:
Lescentresdeserviceautoriséspeuventêtrelocalisésenligneauwww.ryobitools.com ou en téléphonant au 1-800-525-2579.
• COMMENTOBTENIRDEL’AIDEENCONTACTANTLESERVICEÀLACLIENTÈLE:
Pour contacter le service à la clientèle pour une question technique ou pour tout autre renseignement, veuillez nous téléphoner
au 1-800-525-2579.
RYOBIestunemarquedéposéedeRYOBILimitedetestutiliséeenvertud’unelicenceaccordéeparRyobiLimited.
RYOBIesunamarcaregistradadeRyobiLimitedyseutilizaconformeaunalicenciaotorgadaporRyobiLimited.
• PIEZASDEREPUESTOYSERVICIO
Antes de solicitar servicio técnico o comprar piezas de repuesto, obtenga su modelo y número de serie de la placa de datos del
producto.
• NÚMERODEMODELO ______________________
• NÚMERODESERIE ______________________
• CÓMOOBTENERPIEZASDEREPUESTO:
Laspiezasderepuestosepuedencomprarennuestrositioenlaredmundial,enladirecciónwww.ryobitools.com o llamando al
1-800-525-2579.LaspiezasderepuestotambiénsepuedenobtenerenunodenuestrosCentrosdeServicioAutorizados.
• CÓMOLOCALIZARUNCENTRODESERVICIOAUTORIZADO:
PuedeencontrarlosCentrosdeServicioAutorizadosvisitandonuestrositioenlaredmundial,enladirecciónwww.ryobitools.
com o llamando al 1-800-525-2579.
• CÓMOOBTENERSERVICIOOASISTENCIATÉCNICAALCONSUMIDOR:
Para obtener Servicio o Asistencia Técnica al Consumidor, sírvase comunicarse con nosotros llamando al 1-800-525-2579.
RyobiisaregisteredtrademarkofRyobiLimitedandisusedpursuanttoalicensegrantedbyRyobiLimited.
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 •Phone 1-800-525-2579
États-Unis,Téléphone1-800-525-2579 •USA,Teléfono 1-800-525-2579
www.ryobitools.com
OPERATOR’S MANUAL / 18 V DUAL CHEMISTRY BATTERY CHARGER
MANUEL D’UTILISATION / CHARGEUR DE PILES À COMPOSITION CHIMIQUE DOUBLE DE 18 V
MANUAL DEL OPERADOR / CARGADOR DE BATERÍA PARA DOS TIPOS DE COMPUESTOS QUÍMICOS DE 18 V
P116
P116
P116
P116
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Ryobi P115 Manuel utilisateur
- español: Ryobi P115 Manual de usuario
Related papers
Other documents
-
HART HLCG01 User manual
-
HART HLCG02 User manual
-
PowerStroke PSL0CH183 Owner's manual
-
RIDGID AC848695 User manual
-
-
-
Craftsman 315.CH2021 Owner's manual
-
-
-