Tannoy Di5 User manual

Brand: Tannoy

Model: Di5

Category: Portable speakers

Type: User manual

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

Designed for a wide variety of sound reinforcement applications, the Tannoy Di5 is a high

performance, ultra compact surface mount weather resistant loudspeaker. A full bandwidth

loudspeaker designed for commercial, professional and residential applications where

environment durability and high quality sonic performance are required. Indoor or outdoor,

these speakers are ideally suited to stereo or monaural background or foreground music

systems in such applications as diverse as theme parks, retail premises, restaurants and

cafés, corporate audio visual, residential developments and houses of worship.

Equipped with Tannoy’s unique and exclusive point source ICT™ 110mm (4.50") drive unit,

the Di5 delivers an acoustic performance of outstanding clarity, definition and detail.

The point source configuration of the Tannoy ICT™ driver’s mid-bass and tweeter sections

ensures a wide and controlled dispersion for optimum coverage; this while avoiding the

massive loss of energy in the vertical plane, at the crossover frequency, inherent in

two-way discrete designs. The ICT™ (Inductive Coupling Technology) drive unit also

addresses the two most common component failures experienced in background music

and sound reinforcement systems, the tweeter and the crossover reliability. The use of a

wireless electromagnetic tweeter means that no crossover is required in the design; this

therefore ensures that an ICT™ unit is exceptionally reliable and therefore ideal for

applications where constant heavy usage is the norm. This aluminium high frequency

dome has a deep drawn skirt that sits on the inside of the low frequency voice coil in the

same magnetic gap. The skirt is like a single shorted turn that is induced with high

frequency information generated by the low frequency voice coil, which is fed a full

bandwidth signal. The mineral loaded polypropylene cone material and nitrile rubber

surround further enhance durability and long-term reliability.

Available in textured black or white painted finish with matching rubber trims, the

outstandingly durable and scuff resistant, high impact polystyrene (HIPS) Di enclosure is

weather resistant,rated IP64 to EN60529 (IEC529); a construction fully optimised for

consistent performance in adverse conditions indoors or out.

Modification is possible by application of alternative colour trims. Two standard colour trim

options are available from stock; enabling black or white product to be supplied factory

pre-fitted with either red or blue trims.

Other trim colours can also be created to suit specific requirements, but only as a special

order customisation subject to minimum order quantities. Primarily aimed at corporate

branding applications, this aesthetic flexibility will also enable colour coordination for

larger installs.

Transformer version - the Di5t

The Di5t model option is equipped with an internally mounted low insertion loss line

transformer for 70V or 100V distributed sound applications. Wattage taps are easily

configurable to the following settings via an easily accessible rotary tapping switch, which

is top panel mounted under the rubber trim.

70V: 30W / 15W / 7.5W / 3.75W / OFF & Low Impedance operation

100V: 30W / 15W / 7.5W / OFF & Low Impedance operation

Product Description

• 110mm (4.50”) ICT™ transducer for high

performance and durability

• 90 degree controlled conical dispersion for optimum

coverage and forward gain

• Weather resistant rated IP64 to EN60529 (IEC529)

• High power handling and extended bandwith

• Phase coherent design for superior vocal articulation

and music reproduction

• No crossover required, ensuring better phase,

impedance and sensitivity response and

increased durability

• Yoke bracket supplied, optional accessories include

pole mount adaptor and the unique K-Ball™ pre-wired,

fully adjustable multi-angle bracket

• Five year loudspeaker warranty

Transformer version - the Di5t

• Low insertion loss 30W transformer for an more

powerful and dynamic performance in distributed

audio installations

• Top mounted switch for line voltage settings

• Indoor or outdoor commercial, professional and

residential installations

• High level stereo or monaural background or

foreground music and speech paging systems

• Theme parks

• Theme bars

• Reception / waiting rooms

• Airports, convention centres and hotels

• Business music systems

• Boardrooms and offices

• Cruise ships

• Retail outlets and shopping malls

• Restaurants and cafes

• Corporate audio visual

• Residential developemnts

• Houses of worship

Features

Applications

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

TECHNICAL SPECIFICATIONS

requency Response (-3dB)

(

0Hz - 25kHz

Frequency Range (-10dB)

(1)

80Hz - 30kHz

System Sensitivity (1W @1m)

(2)

88dB (1W = 2.45V for 6 Ohms)

Dispersion (-6dB) 90 degrees conical

river Complement

Low Frequency 1 x 110mm (4.50”)

Mineral loaded polypropylene

igh Frequency 25mm (1.00”) ICT™

rossover 7kHz Inductively coupled

Directivity Factor (Q) 5.3 averaged 1kHz to 10kHz

irectivity Index (DI) 6.6 averaged 1kHz to 10kHz

Rated Maximum SPL

(2)

Average 105dB

Peak 111dB

Power Handling

Average 50W

Programme 100W

Peak 200W

Recommended Amplifier Power 100W @ 6 Ohms

Nominal Impedance 6 Ohms

Di5t - Transformer Taps (top rotary switch)

70V 30W / 15W / 7.5W / 3.75W / OFF

& low impedance operation

100V 30W / 15W / 7.5W / OFF

& low impedance operation

Distortion

10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic

250Hz 2.00% 0.26%

1kHz 0.53% 0.19%

10kHz 2.5% 0.35%

1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic

250Hz 0.65% 0.09%

1kHz 0.144% 0.11%

10kHz 0.52% 0.298%

Enclosure High Impact Polystyrene (HIPS)

rated IP64 to EN60529 (IEC529)

Grille Steel, with weather resistant coating

Finish Textured black or white paint

(custom trim colours can be supplied pre-fitted

o special order - minimum order quantity applies)

Connectors Euroblock type removable locking connector with

screw terminals with "loop through" facility

ittings 1 x K-Ball™ bracket socket

2 x M8 yoke bracket inserts

upplied Yoke bracket

Accessories

Optional Pole mount adaptor

Accessories K-Ball™ pre-wired multi angle bracket

Dimensions 240.7 x 155 x 162mm (H x W x D)

(9.47 x 6.1 x 6.38”) (H x W x D)

NET Weight 2.7kg (5.94lbs)

Notes:

(1) Average over stated bandwidth. Measured at 1 metre on axis.

(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber

A full range of measurements, performance data, CLF and Ease™ Data can be

downloaded from www.tannoy.com

Full independent verification of published specifications carried out by NWAA Labs,

California can also be obtained from the downloads section of www.tannoy.com

Tannoy operates a policy of continuous research and development. The introduction

of new materials or manufacturing methods will always equal or exceed the

published specifications, which Tannoy reserves the right to alter without prior

notice. Please verify the latest specifications when dealing with critical applications.

System Di5 / Di5t

Construction

8001 4010 Di5 Black 2 3.0 (6.61lb)

8001 4011 Di5 White 2 3.0 (6.61lb)

8001 4020 Di5t Black 2 3.5kg (7.72lbs)

8001 4021 Di5t White 2 3.5kg (7.72lbs)

PART NUMBER PACKED WEIGHTPACKED

QUANTITY

COLOURMODEL NAME

Ordering Information

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

PERFORMANCE MEASUREMENTS

100

10 100 1000 10000 100000

10 100 1000 10000

Horizontal Off-Axis Responses

100

10 100 1000 10000 100000

0 deg

10 deg

20deg

30deg

40deg

NECHOIC

FREQUENCY

RESPONSE

IMPEDANCE

OFF AXIS

RESPONSE

m on-axis frequency response

frequency (Hz)

SPL, 1W/1m (dB)

frequency (Hz)

1m on-axis frequency response

frequency (Hz)

Impedance (ohms)

Level (dB)

Horizontal off-axis response

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

PERFORMANCE MEASUREMENTS

120

150

210

240

300

330

100 1000 10000

100

100 1000 10000

F ( H )

BEAMWIDTH

DIRECTIVITY INDEX

eamwidth vs Frequency

frequency (Hz)

DI vs Frequency

Degrees

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Di5

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)

-36

-24

-12

270

300

330

100 Hz

125 Hz

160 Hz

00 Hz

-48

-36

-12

270

330

250 Hz

315 Hz

400 Hz

500 Hz

-48

-36

-24

-12

270

300

-48

-36

-24

-12

270

300

-48

-36

-24

-12

270

300

330

-48

-36

-24

-12

270

300

330

630 Hz

800 Hz

1 kHz

1.25 kHz

1.6 kHz

2 kHz

2.5 kHz

3.15 kHz

4 kHz

5 kHz

6.3 kHz

8 kHz

10 kHz

12.5 kHz

16 kHz

20 kHz

1.6 kHz

2 kHz

2.5 kHz

3.15 kHz

630 Hz

800 Hz

1 kHz

1.25 kHz

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

-48

-36

-24

-12

0270

300

330

-48

-36

-24

-12

0270

300

330

-48

-36

-24

-12

270

300

330

-48

-36

-24

-12

270

300

330

-48

-36

-24

-12

270

300

330

-48

-36

-24

-12

270

300

330

4kHz

5kHz

6.3kHz

8kHz

10 kHz

12.5 kHz

16 kHz

20 kHz

1.6 kHz

2 kHz

2.5 kHz

3.15 kHz

630 Hz

800 Hz

1 kHz

1.25 kHz

100Hz

125Hz

160Hz

200Hz

250Hz

315Hz

400Hz

00Hz

PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)

1.6kHz

2kHz

2.5kHz

3.15kHz

630Hz

800Hz

1kHz

1.25kHz

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

DIMENSIONAL SKETCHES

R165.0mm

(

R6.50”)

102.0mm

(

4.02”)

R300.0mm

(R11.81”)

155.0mm

(

6.10”)

62.0mm

(6.38”)

240.7mm

(9.47”)

130.4mm

(5.13”)

241.0

[9.49"]

123.0

[4.84"]

54.0

[2.13"]

R15.0

[R0.59"]

85.0

[3.35"]

90.0

[3.54"]

6.0

[0.24"]

35.0

[1.38"]

Di5 YOKE

241.0mm

(9.49”)

R15.0mm

(0.59”)

123.0mm

(4.84”)

54.0mm

(2.13”)

90.0mm

3.54”

85.0mm

3.35”

35.0mm

1.38”

6.0mm

(0.24”)

Ø22.0mm

(Ø0.87”)

Di5 Yoke

SUPPLIED MOUNTING BRACKET

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

OPTIONAL ACCESSORIES

47.7

[1.88"]

137.9

[5.43"]

93.2

[3.67"]

155.0

[6.10"]

65.0

[2.56"]

155.0mm

(6.10”)

137.9mm

(5.43”)

65.0mm

(2.56”)

K-Ball™ Bracket

93.0mm

(

3.67”)

47.7mm

(

1.88”)

Pole Mount Adapter

Pole Mount Adapter with K-Ball™ bracket

Pole Mount Adapter with Yoke bracket

240.0

[9.45"]

70.0

[2.76"]

40.0

[1.57"]

Ø22.0

[Ø0.87"]

Ø7.0

[Ø0.28"]

Ø76.2

[Ø3.00"]

Ø152.4

[Ø6.00"]

Ø228.6

[Ø9.00"]

8001 4190 K-Ball™ Bracket Black 1

8001 4191 K-Ball™ Bracket White 1

8001 4600 Pole Mount Adapter Black 1

8001 4601 Pole Mount Adapter White 1

PACKED QUANTITY

PART NUMBER

COLOUR

MODEL NAME

Ordering Information

240.0mm

(9.45”)

40.0mm

(1.57”)

Ø22.0mm

(Ø0.87”)

Ø152.4mm

(Ø6.00”)

Ø76.2mm

(Ø3.00”)

Ø226.6mm

(Ø9.00”)

Ø7.0mm

(Ø0.28”)

Ø70.0mm

(Ø2.76”)

Di5

Tannoy United Kingdom

Tannoy North America

Tannoy Deutschland

Tannoy France

T: 00 44 (0) 1236 420199

T: 00 1 (519) 745 1158

T: 00 49 (180) 1111 881

T: 00 33 (0)1 7036 7473

E: [email protected]

Tannoy adopts a policy of continuous improvement and product specification is subject to change

Di5 data file // issue 1.06 // 14.01.08

The weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted

in an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be

constructed from steel with a weather resistant coating.

Performance of the Di5t surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees

(-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in

an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B

test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting).

The Di5t speaker system shall be equipped with a 30W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with

30 / 15 / 7.5 / 3.75* Watt, OFF and Low Impedance taps available. An easily accessible rotary switch located under the rubber trim on the top of the cabinet

shall be available for selecting transformer and low impedance settings.

A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination

with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by

a tie back point.

The dimensions shall not exceed 240.7 x 155 x 162mm (9.47 x 6.10 x 6.38”).

The surface mount speaker system shall be the.....Di5t.

*70 Volt only

Architectural specifications Di5t

he weather resistant, full bandwidth surface mount speaker system shall consist of a 110mm (4.50") full range, point source ICT™ transducer mounted

n an optimally tuned vented, injection moulded high impact polystyrene (HIPS) enclosure, rated IP64 to EN60529 (IEC529). The protective grille shall be

onstructed from steel with a weather resistant coating.

Performance of the Di5 surface mount speaker shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 90 degrees

(-6dB). Frequency response measured on axis shall be 80Hz - 30kHz (-10dB from rated sensitivity, average over stated bandwidth. Measured at 1 metre in

an anechoic chamber) with no equalisation. Sensitivity shall be 88dB (1W = 2.45V for 6 Ohms). Long term power handling capacity as defined in EIA-426B

test shall be 50W, recommended amplifier power 100W. The nominal system impedance shall be 6 Ohms (in low impedance setting).

A termination recess shall be integrated with the rear panel, a removable Euroblock type locking connector with screw terminals for secure wire termination

with "loop through" facility shall be provided. A yoke mounting bracket shall be included with the speaker system and additional security shall be provided by

a tie back point.