2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. 48-inch Bagger Finishing Kit, TITAN ZX/MX Series Riding Mower

Toro 48-inch Bagger Finishing Kit, TITAN ZX/MX Series Riding Mower, 54-inch Bagger Finishing Kit, TITAN ZX/MX Series Riding Mower, 60-inch Bagger Finishing Kit, TITAN ZX/MX Series Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 48-inch Bagger Finishing Kit, TITAN ZX/MX Series Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3372-308RevA
48,54,and60InchBaggerFinishingKit
TITANZX/MXSeriesRidingMower
ModelNo.121-5662
ModelNo.121-5663
ModelNo.121-5664
InstallationInstructions
ThiskitrequirestheBaggerKit79328to
completeinstallation.ContactyourAuthorized
ServiceDealerorToroCustomerService
toobtainthenecessaryparts.Formore
information,visitusatwww.Toro.com.
Safety
Important:TheROPSrollbarisanintegralandeffectivesafetydevice.Keeptherollbarinthefullyraisedand
lockedpositionwhenoperatingthemower.Lowertherollbartemporarilyonlywhenabsolutelynecessary.
SafetyandInstructionalDecals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential
danger.Replaceanydecalthatisdamagedorlost.
110-6691
1.Thrownobjecthazard—keepbystandersasafedistance
fromthemachine.
2.Thrownobjecthazard,mower—donotoperatewithoutthe
deector,dischargecover,orgrasscollectionsystemin
place.
3.Cutting/dismembermentofhandorfoot—stayawayfrom
movingparts.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Weight2
Adhesivebumper2
Rod1
Washer4
Hairpin2
1
Spacer
8
Installtheweight(Machineswithouta
ROPS).
Straightbafe(48inchmowerdecks
only)
1
Curvedbafe(54inchmowerdecks
only)
1
Locknut(5/16inch)
1
Handknob1
Washer1
2
Chute
1
Installthechutefor48and54inch
mowerdecks.
Curvedbafe
1
Locknut(5/16inch)
1
Handknob1
Washer1
3
Chute
1
Installthechutefor60inchmower
decks(Modelyear2010andnewer).
4
Circularcotterpin
1Installthebaggertop.
5
Nopartsrequired
–
Connectwiththedischargetube.
6
Hi-Liftblade
3Installtheblades.
1
InstallingtheWeight
Partsneededforthisprocedure:
2Weight
2Adhesivebumper
1Rod
4Washer
2Hairpin
8
Spacer
Procedure
Usethefollowingtabletodeterminethenumberofweights
neededforyourmachine.Forcertainmachines,notall
weightsincludedwiththekitwillbeused.
NumberofWeightstoUse
SizeofMowerDeck
Machinewitha
ROPS
Machinewithouta
ROPS
48inch2weights1weightand
spacers
54inch2weights1weightand
spacers
60inch1weightand
spacers
Noweightused
1.Determinethenumberofweightsneededforyour
machine.
2.ForallMXTitanmachinesandallmachineswith60
inchmowerdecks,removethe2nutsandboltsthat
securethefrontofthemowerhousingpan(Figure1).
Note:Savethenutsandboltstosecurethefrontof
themowerhousingpanlater.
2
Figure1
1.Nut3.Mowerhousingpan
2.Bolt
3.Installanadhesivebumpertotheweight(Figure2and
Figure3).
G016271
1
2
3
4
5
Figure2
Installationof2weights
1.Adhesivebumper4.Hairpin
2.Frontweight5.Washer
3.Rod
G01821 1
3
5
4
1
2
6
Figure3
Installationof1weight
1.Adhesivebumper4.Hairpin
2.Frontweight5.Washer
3.Rod
6.Spacers(usedforone
weightonly)
4.Installtheweighttothefrontofthemachineframe.
5.Securetheweightwitharod,fourwashers,andtwo
hairpinsasshownin
Figure2.Usethe8spacersif
installingjustonefrontweightasshowninFigure3.
Note:Wheninstallingthefrontweightallowittorest
onthefrontlipoftheundersideofthemachineframe
asshownFigure4.Thiswillsuspendtheweightwhile
yousecureittothemachine.Usecarenottodislodge
theweightwheninstallingthesupportingrod.
G010701
1
2
3
4
Figure4
1.Cutawayofthefrontofthe
machineframe
3.Weight
2.Bumper4.Resttheweighthere
duringinstall
6.ForallMXTitanmachinesandallmachineswith
60inchmowerdecks,installthefrontofthemower
housingpanusingthenutsandboltspreviously
removed(Figure1).
Important:Wheneveryouremovethebagger
attachment,remembertoremovethefrontweightto
returntheproperstabilitytothemachine.
3
2
InstallingtheChutefor48and
54inchMowerDecks
Partsneededforthisprocedure:
1
Straightbafe(48inchmowerdecksonly)
1
Curvedbafe(54inchmowerdecksonly)
1
Locknut(5/16inch)
1Handknob
1Washer
1
Chute
Procedure
UsethisprocedurewheninstallingtheFinishingKiton
machineswith48and54inchmowerdecks.
WARNING
Anuncovereddischargeopeningcouldallowthe
lawnmowertothrowobjectsintheoperatoror
bystander'sdirectionandresultinseriousinjury.
Also,contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschuteand
catcher.
Neveroperatethemowerwiththedischargeopening
uncovered.Adischargecover,mulchcoverorbaggingchute
mustalwaysbeusedwhenthemowerdeckisoperated.
1.Removefastenerssecuringthedeectorassemblyand
existingcutoffbafetothemowerdeck(Figure5).
Retainallfasteners.
G010637
1
2
2
3
4
5
6
7
Figure5
1.Deectorassembly5.Locknut(existing)
2.Fasteners(existing),retain
6.Forwardhole
3.Carriagebolt(existing)
7.Frontretainingclasp
4.Cutoffbafe(existing)
2.For54inchmowerdecksonly,removethefasteners
pluggingtheforwardhole.
3.Removethedeectorassemblyandreinstallthe
cutoffbafe.Retainallpartstoconvertthedeckto
sidedischarge.
4.Installabafetothemowerdeck(
Figure6).For
48inchdecks,useastraightbafe.For54inch
decks,useacurvedbafe.Aligntheverticalpost
onthebafeinsidethemowerdeck.Rotatethebafe
untilthehorizontalpostalignswiththeholeinthe
frontwallofthemowerdeck.Secureittothefront
wallofthemowerdeckusingalocknut.
4
1
2
3
4
5
6
7
G015685
Figure6
1.Retainingclasp5.Horizontalpost
2.Forwardhole6.Locknut
3.Bafe(curvedshown)
7.Frontwallhole
4.Verticalpost
5.Installthechutetothemowerdeckmakingsurethe
openingintopofthechutealignswiththeexposed
postonthemowerdecktop(Figure7).
G010638
1
2
3
4
5
6
Figure7
1.Dischargechute
4.Postincurvedbafe
2.Handknob
5.Frontexiblelatch
3.Washer
6.Openinginthetopofthe
chute
6.Installawasherandhandknoboverthepostcoming
throughthechutetop.Handtightentosecurethe
chutetothemowerdeck.
7.Hookthefrontexiblelatchonthechutetothe
retainingclaspweldedtothefrontwallofthemower
deck(
Figure8).Hooktheexiblelatchonthebackof
thechutetotheretainingclaspweldedtotherearwall
ofthemowerdeck.
Figure8
1.Flexiblelatchandretainingclasp
3
InstallingtheChutefor60
inchMowerDecks(ModelYear
2010andNewer)
Partsneededforthisprocedure:
1
Curvedbafe
1
Locknut(5/16inch)
1Handknob
1Washer
1
Chute
Procedure
UsethisprocedurewheninstallingtheFinishingKiton
machineswith60inchmowerdecks(Modelyear2010and
newer).
WARNING
Anuncovereddischargeopeningcouldallowthe
lawnmowertothrowobjectsintheoperatoror
bystander'sdirectionandresultinseriousinjury.
Also,contactwiththebladecouldoccur.
Neveroperatethelawnmowerunlessyouinstall
acoverplate,amulchplate,oragrasschuteand
catcher.
Neveroperatethemowerwiththedischargeopening
uncovered.Alwaysuseadischargecover,mulchcover,or
baggingchutewhenoperatingthemowerdeck.
1.Removefastenersthatsecurethedeectorassemblyto
themowerdeck(Figure9).
Note:Retainallfasteners.
5
G013095
1
2
3
4
5
Figure9
1.Deectorassembly4.Carriagebolt(existing;
reuse)
2.Locknut(existing;retain)5.Carriagebolt(existing;
retain)
3.Locknut(existing,reuse)
2.Removethedeectorassembly.
Note:Retainallpartstoconvertthemowerdeckto
sidedischarge.
3.Locateandinstalltheangledcutoffbafetothemower
deckattherearholesinthemowerdeck(
Figure10).
Note:Usetheexistingfastenersfromthatlocationto
securetheangledcutoffbafetothemowerdeck.
G013096
1
2
3
4
5
6
7
8
9
10
Figure10
1.Holeinfrontwallofthe
mowerdeck
6.Highliftblade
2.Locknut
7.Carriagebolt(existing;
reuse)
3.Horizontalpost,curved
bafe
8.Angledcutoffbafe
4.Verticalpost,curvedbafe9.Locknut(existing;reuse)
5.Curvedbafe10.Center,forwardholein
mowerdeck
4.Installthecurvedbafetothemowerdeck(Figure10).
A.Aligntheverticalpostinthecurvedbafewith
center,forwardholeinthemowerdeckandthe
horizontalpostwiththeholeinthefrontwallof
themowerdeck.
B.Securehorizontalposttothefrontwallofthe
mowerdeckusingalocknut.
5.Installthechutetothemowerdeck.
Note:Ensurethattheopeningintopofthechute
alignswiththeexposedpostonthemowerdecktop
andtheforwardverticalplatemateswiththefolded
metalbracketofthechute(Figure11).
G013097
1
2
3
4
5
6
Figure11
1.Dischargechute4.Foldedmetalbracket,
chute
2.Handknob5.Forwardverticalplate,
deck
3.Washer6.Exposedpostinthemower
deck,curvedbafe
6.Installawasherandhandknoboverthepostcoming
throughthechutetop(Figure11).
7.Handtightentheknobtosecurethechutetothe
mowerdeck.
8.Hooktheexiblelatchonthechutetotheretaining
claspweldedtothesidewallofthemowerdeck
(
Figure12).
6
G013098
1
2
Figure12
1.Retainingclasp2.Flexiblelatch
4
InstallingtheBaggerTop
Partsneededforthisprocedure:
1
Circularcotterpin
Procedure
1.Installthebaggertoptothebaggerframe.Slidethe
bracketsoverthepostsinthebaggerframeandinstall
thecircularcotterintotheholeintherighthand
post(Figure13).Rotatethebaggertopdowntothe
operatingposition.Thebaggertopiseasiertoinstallif
twopeopleworktogether.
Note:Toremovethecircularcotter,continuetorotate
itinthesamedirectionasinstalled.
G016265
Figure13
1.Baggertop
4.Circularcotterpin
2.Baggerframe
5.Post
3.Bracket,baggertop
7
2.Liftthebaggertopandinstallthebagsbysliding
thebagframehooksontotheretainingbrackets
(Figure14).
G005672
1
2
3
4
Figure14
1.Bag3.Retainingbracket
2.Baggerframe4.Bagframehook
3.Lowerthebaggertopontothebag(Figure15).
G005757
Figure15
5
ConnectingwiththeDischarge
Tube
NoPartsRequired
Procedure
1.Slidethecurvedendofthedischargetubeintothe
openinginthebaggertop(Figure16).
G010641
1
2
3
4
5
Figure16
1.Dischargetube,curved
end
4.Peg
2.Openinginbaggertop
5.Rubberstrap
3.Dischargetube,aredend
2.Slidethearedendofthedischargetubeoverthe
endofthechute.Movetherubberretainingstrapon
thechutesnapsoverthepegonthedischargetubeto
secureit(Figure16).
8
6
InstallingtheBlades
Partsneededforthisprocedure:
3
Hi-Liftblade
Procedure
1.Removetheexistingmowerbladesinstalledonyour
mowerdeck.RefertotheRemovingtheBladessection
intheOperator'sManualformoreinformation.
2.InstalltheHi-Liftmowerbladeslocatedinloose
parts.RefertotheInstallingtheBladessectioninthe
Operator'sManualformoreinformation.
Maintenance
RemovingtheFinishingKit
Wheneverthebaggerkitisremoved,thenishingkitshould
beremovedusingthefollowingprocedure.Retainallparts
forfutureinstallation.
CAUTION
Removingthebaggerchangestheweight
distributionofthemachine.Operatingthemachine
withthefrontweightsinstalledwithoutthebagger
maycauseanunstableconditionwhichcouldresult
inalossofcontrol.
Ensurethefrontweightsareproperlyremoved
beforeoperatingthemachinewithoutthebagger
attachment.
1.Removethefrontweights.Removethefastener
securingtheweighttothemachine.Takecareto
controltheweightasthesupportrodisremoved.
2.Removethedischargetubefromthemachine.
3.Installthecutoffbafe(Figure17).
Replacethepreviouslyremovedcutoffbafefor60
inchmowerdecks(Figure10).
4.Installthedeectorassembly(Figure17andFigure18).
5.For54inchmowerdecksonly,replacethenutandbolt
intheforwardhole(Figure17).
WARNING
Anuncovereddischargeopeningcouldallow
thelawnmowertothrowobjectsinthe
operatororbystander'sdirectionandresult
inseriousinjury.Also,contactwiththeblade
couldoccur.
Neveroperatethelawnmowerunlessyou
installacoverplate,amulchplate,oragrass
chuteandcatcher.
9
G010637
1
2
2
3
4
5
6
7
Figure17
48and52inchMowerDeck
1.Deectorassembly5.Locknut(existing),reuse
2.Fasteners(existing),retain
6.Forwardhole
3.Carriagebolt(existing),
reuse
7.Frontretainingclasp
4.Cutoffbafe(existing)
G013095
1
2
3
4
5
Figure18
60inchMowerDeck
1.Deectorassembly4.Carriagebolt(existing;
reuse)
2.Locknut(existing;retain)5.Carriagebolt(existing;
retain)
3.Locknut(existing,reuse)
6.Replacethemowerblades.
•RemovetheHi-Liftmowerbladesinstalledon
yourmowerdeck.RefertotheRemovingthe
BladessectionintheOperator'sManualformore
information.
•Installthestandardmowerbladesremoved
previously.RefertotheInstallingtheBlades
sectionintheOperator'sManualformore
information.
Important:TheROPSrollbarisanintegraland
effectivesafetydevice.Keeptherollbarinthefully
raisedandlockedpositionwhenoperatingthemower.
Lowertherollbartemporarilyonlywhenabsolutely
necessary.
10
Notes:
11
/