Wiremold
®
Electrical Systems conform with, and should be installed and properly
grounded in compliance with requirements of the current National Electrical Code or
codes administered by local authorities. All electrical products may represent a possi-
ble shock or fire hazard if improperly installed or used.Wiremold electrical products are
UL listed, made for interior use and should be installed by qualified electrical profes-
sionals in conformance with current local codes and/or the National Electrical Code.
WallSource
™
New Construction Box
INSTALLATION INSTRUCTIONS
In Stud Construction For Backfeeding
4000 / 6000
ALA4800
5400 and 5500
Use template included to cut openings in Raceway.
UL requires Backfeed shield for 4000 and 6000.
UL requires use of included dividers for proper separation.
4000 / 6000
WSA86 includes templates, dividers,
screws and 4000/6000 backfeed plate. For
use with WSA42-4.
Use template included to cut openings in Raceway.
5400TB 5500 ALA4800 5400TBD
The Wiremold Company
In U.S.:
60 Woodlawn Street • West Hartford, CT 06110
1-800-621-0049 • FAX 860-232-2062
In Canada:
850 Gartshore Street • Fergus, Ontario N1M 2W8
1-800-741-7957 • FAX 519-843-5980
www.wiremold.com
41691 199©1999 The Wiremold Company
UL requires use of included dividers for proper separation.
UL requires use of included dividers for proper separation.
-
1
-
2
Legrand WSA42-4 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Legrand 30TC-3S2 Operating instructions
-
Legrand NM20IG612 Operating instructions
-
-
-
-
-
-
-
Legrand 5515 Installation guide
-