17cH55_20538
Assembly and Use
Assemble the three ornament trays by expanding the at
boxes as shown in the diagram (Figs. 1-2). First fold the
side aps and then the end aps into the center of the box
(Figs. 3-4). Then assemble the ornament separator grids
by aligning the slots in the four short pieces with the slots
in the three long pieces (Fig. 5). Lock the grids into the
boxes by inserting the tabs on the ends of the grids into the
notches in the box aps (Fig. 6).
You can adjust the tray sections for large ornaments by
removing dierent grid pieces.
Cleaning
Clean the clear windows with a soft cloth and water. Clean
the storage bin fabric with a soft brush and lukewarm water.
DO NOT USE SOAP as it may remove the protective coatings
added by the factory. Do not brush the clear windows as
they could be scratched. Air dry.
Storage
To avoid any possibility of mildew be sure the storage bin
and all contents are completely dry before you store in an
enclosed area for a long period.
Instructions: Ornament Organizer Storage Bin
CLASSIC ACCESSORIES, LLC
KENT, WA USA 98032 ©2017
classicaccessories.com
57-005-014301-00
no bleach
do not
pack wet
no tools
required
do not iron
line dry
no bleach
ne pas
javelliser
no use
blanqueador
do not
wash
do not
wash FR
do not
wash SP
line dry
entendre
mouille
colgar
par ra que
escurra
tumble
dry gentle
secher?la
machine
sans chaleur
secar sin
calor
machine
wash cold
laver?la
machine?
l’eau froide
lavado a
máquina
con agua fría
30C
hand
wash cold
laver?la
main?l’ea
u froide
lavado a
mano con
agua fría
30C
do not
iron
ne pas
repasser
no
planchar
not
waterproof
not
waterproof
secar sin
calor
mild soap
mild soap
FR
mild soap
SP
do not
pack wet
do not
pack wet
do not
pack wet
no tools
required
no tools
reqired
no tools
required
bleach ok
bleach ok
bleach ok
Fig. 4 Fig. 5 Fig. 6
Fig. 1
Fig. 2 Fig. 3