Niche 2000NTBK Installation guide

Type
Installation guide
Find your niche
VERSATILE AND MODERN
MIA RECLINING CHAIR 2000
BEFORE YOU ASSEMBLE:
• Place all parts on a clean, smooth surface to avoid scratching the parts
• Check to be sure you have all parts and hardware
• Remove all wrapping materials, including any staples & packing straps
• Keep all hardware, small parts and packaging out of reach of children
ASSEMBLY INSTRUCTIONS
IN THE BOX:
A: Wood Frame (2)
B: Stringers (2)
D: Seat Frame (1)
I: Fabric Cover (1)
C: Back Frame (1)
E: Medium Bolts (4)
F: Small Bolts (2)
G: Large Bolts With
Inserts (4)
H. Allen Wrench
(1)
Find your niche
VERSATILE AND MODERN
MIA RECLINING CHAIR 2000
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
Aach Back Frame (C) to Seat Frame (D) using Small Bolts (F)
and Allen Wrench (H) .
Aach Assembled Seat to Standing Frame with Large Bolts (E).
Insert from outside of Frame (A) and into Seat using Allen
Wrench (H).
Aer seat and frame are aached, ghten down all bolts using
Allen Wrench (H).
D
E
E
A
A
E
E
F
F
C
STEP 3
Place the assembled seat frame down with the curved side of
the headrest facing up. Slide Fabric Cover (I) over the frame so
the zipper of the Fabric Cover (I) is on the back side of the frame.
Aach Stringers (B) to Wood Frames (A). Remove Inserts from Large Bolts (G) and place Inserts into pre-drilled holes on Stringers (B)
(See Figure 1.)
Insert Large bolts (G) from outside of Wood Frames (A) and connect to Inserts using Allen Wrench (H). Please Note: Do not
completely ghten bolts yet.
A
B
AA
B
B
G
G
G
Figure 1
  • Page 1 1
  • Page 2 2

Niche 2000NTBK Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI