2. Del Hutson Designs
  3. DHD1060dw
DHD1060dw

Del Hutson Designs DHD1060dw Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Del Hutson Designs DHD1060dw Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PRE-DRILLED UNITS
HANGING INSTRUCTIONS
STEP 1
Insert the supplied #6 2.5”phillips head screw into the pre-drilled hole.
Do until about 1/8” of the screw exits back side of board. At desired height
hold the shelf level and press the screw tip into the wall surface as a marker.
2
STEP 2
Either on a stud or using the supplied drywall anchor tighten screw until
secure (do not over tighten).
/