Finlux 50F8090S-T User manual

Brand: Finlux

Model: 50F8090S-T

Category: LCD TVs

Type: User manual

English - 1 -

Contents

Environmental Information ..................................... 2

Accessories included .............................................. 3

TV - Features ......................................................... 3

Safety Precautions and Important Information ....... 3

Viewing the TV ...................................................... 4

TV Control Buttons & Operation ............................. 4

Operation with the Buttons on the TV ..................... 4

Operation with the Remote Control ........................ 4

Remote Control ..................................................... 5

Inserting the Batteries into the Remote Control...... 7

Connect Power & Antenna ..................................... 7

Switching On/Off ..................................................... 7

First Time Installation.............................................. 7

Media Playback via USB Input ............................... 8

Quick Menu ............................................................ 9

Changing Image Size: Picture Formats .................. 9

Using the Channel List ........................................... 9

Menu Features and Functions ...............10-11-12-13

Menu Features and Functions ...............................11

Menu Features and Functions .............................. 12

Menu Features and Functions .............................. 13

Electronic Programme Guide (EPG) .................... 14

Recording a Programme ...................................... 14

Timeshift Recording ............................................. 15

Instant Recording ................................................. 15

Watching Recorded Programmes ....................... 15

....................................... 15

Product Safety ............................................... 15

Wired Connectivity................................................ 16

Wireless Connectivity .......................................... 17

Other Information.................................................. 18

Connectivity Troubleshooting ............................... 18

DLNA ................................................................... 19

iPlayer Application ................................................ 20

Digital Teletext ...................................................... 20

Internet Browser ................................................... 21

Software Upgrade................................................. 22

Troubleshooting & Tips ......................................... 22

............................................. 22

Appendix A: Nero MediaHome Installation ........... 23

Appendix B: PC Input Typical Display Modes ...... 24

Appendix C: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 24

Appendix D: Supported File Formats for USB Media

Browser ................................................................ 25

Appendix E: Supported DVI Resolutions .............. 26

SKY Remote Control Code ................................... 26

....................................................... 26

Important Instruction ............................................. 27

English - 2 -

Power cord and plug

• The power cord plug should be easily accessible. If

there is lightning or storms, or if the TV is not going

to be used for a while (e.g. if going away on holiday),

disconnect the TV set from the mains.

•Do not place the TV, furniture, etc. on the power

cord or pinch the cord.

• Handle the power cord by the plug, do not unplug

the TV by pulling the power cord.

• Never touch the power cord/plug with wet hands

as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with

other cords.

• Power cords should be placed in such a way that

they are not likely to be stepped on or provide a

trip hazard.

• A damaged power cord/plug can cause re or give

you an electric shock. When damaged it must be

replaced, this should only be done by qualied

personnel.

Moisture and Water

•Do not use this TV in a humid or damp place (avoid

using in the bathroom or near the kitchen sink)

•Do not expose this TV to rain or water, as this may

be dangerous.

• If any solid object or liquid falls into the cabinet,

unplug the TV and have it checked by qualied

personnel before operating it any further.

Ventilation

• The slots and openings on the TV set are intended

for ventilation and to ensure reliable operation.

• To prevent overheating, these openings must not be

blocked or covered in any way.

Heat sources and Flames

• Do not expose the TV to direct sunlight or other

heat sources.

• The TV should not be placed near open ames or

sources of intense heat such as an electric heater.

• Ensure that no open ame sources, such as lit

candles, are placed on top of the TV.

Headphone Volume

• Excessive sound pressure from earphones and

headphones can cause hearing loss, please take

care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached

to the wall in accordance with the installation

instructions.

Screen

• Occasionally, a few non-active pixels may appear

on the screen as a xed blue, green or red point.

Please note that this does not affect the performance

of your product.

• Take care not to scratch the screen with ngernails

or other hard objects.

Cleaning

• Before cleaning, unplug the TV from the wall socket.

•Do not use liquid or aerosol cleaners. Only use a

soft, dry cloth.

Environmental Information

This television is designed to consume less energy to

help save the environment. You can not only help to

save the environment but you can also save money

by reducing your electricity bills thanks to the energy

efficiency features of this TV. To reduce energy

consumption, you should take the following steps:

You can use the Power Save Mode setting, located

in the Picture menu. If you set the Power Save Mode

as Eco, the TV will switch to energy-saving mode

and the luminance level of TV set will be decreased

to the optimum level. Note that some picture settings

will be unavailable to be changed when the TV is in

Power Save Mode.

If Picture Off is selected, “Screen will be off in 15

seconds.” message will be displayed on the screen.

Select PROCEED and press OK to continue. The

screen will be off in 15 seconds.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

It is highly recommended that you activate the Power

Save Mode setting to reduce your annual power

consumption.

1) If the TV does not receive any input signal (e.g.

from an aerial or HDMI source) for 5 minutes, the TV

will go into standby. When you next switch-on, the

following message will be displayed:

“Standby Cause No Signal”

Press OK to continue.

2) If the TV has been left on and not been operated for

4 hours, the TV will go into standby. When you next

switch-on, the following message will be displayed.

“Standby Cause No Operation”

Press OK to continue.

English - 3 -

Accessories included

Remote Control

Batteries: 2 x AAA

Instruction Book

Side AV Connection Cable

WiFi Dongle

USB Cable

NeroHome Media CD

TV - Features

• Remote controlled colour LED TV

• Fully integrated digital tuner

• DVB-T2 Compliant

• HDMI Inputs are for connecting a device that has

a HDMI socket

• USB input

• 1000 programmes

• OSD menu system

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to six hours

• Sleep timer

• Child lock

• Automatic sound mute when no transmission

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7

• Game Mode (optional)

• Ethernet (LAN) for Internet connectivity

• 802.11n WiFi Support via USB dongle

• DLNA

Safety Precautions and Important

Information

Please read these instructions fully

before installing or operating.

Preparation

Place the device on a solid even surface. For

ventilation purposes, leave a free space of at least

10 cm all around the set. Do not place any objects on

top of the set. Use this device in moderate climates.

Operation temperature and operation humidity:

5ºC up to 45ºC, 85% humidity max. Note: Don’t block

ventilation holes.

Intended Use

This device is used to receive and display TV

programmmes. The different connection options

expand the reception and display sources possible

(various external devices). This device is only

suitable for operation in dry interiors. This appliance

is intended solely for private domestic use and

may not be used for industrial and commercial

purposes. We exclude liability in principle, if the

device is not used as intended, or unauthorized

modications have been made. To operate your TV

in extreme ambient conditions may cause damage

to the device.

WARNING: Never let people (including

children) with reduced physical, sensory or

mental capabilities or lack of experience and / or

knowledge use electrical devices unsupervised.

Children may not recognize the dangers of

incorrect use. The swallowing of batteries can

be fatal. Keep batteries out of reach of small

children. If a battery is swallowed, immediately

seek medical attention. Keep the packaging

lmsoutofreachofchildrentopreventtherisk

of suffocation.

Power source

• The TV should be operated only from a 220-240 V

AC, 50 Hz outlet.

Positioning the TV

• For ventilation, please leave a clear space of at least

10cm all around the TV.

•Do not block the ventilation openings.

•Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• To prevent damage to the TV, do not place any

objects on top of the TV.

English - 4 -

Viewing the TV

TV Control Buttons & Operation

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

Operation with the Buttons on the

Volume Setting

You can move the control switch upward or downward

for changing the volume. To increase volume, please

move the switch upward. Move the switch downward

to decrease the volume. A volume level scale (slider)

will be displayed on the screen.

Programme Selection

First press the control switch once to change channel.

You can move the switch upward to select the next

programme or move it downward to select the

previous programme.

Viewing Main Menu

Menu screen cannot be displayed by using the control

switch.

AV Mode

Press the control switch consecutively until the source

OSD is displayed on the screen.

Operation with the Remote Control

Press the MENU button on your remote control to

display the main menu screen. Use the “ ” or “ ”

buttons to select a menu tab and press the OK button

to select option. Use the “ ” / “ ” or “ ” / “ ” buttons

to select or set an item. Press BACK or EXIT or MENU

button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

“ - (SOURCE)” button on your remote control

consecutively to select the different inputs.

Changing Channels and Volume

You can change the channel and adjust the volume

using the V+/- and P+/- buttons on the remote.

English - 5 -

Remote Control

1. Standby / On

2. Channel list

3. Volume up-down

4. Menu on/off

5. OK / Channel list / Conrm

6. Return / Back

7. Internet Portal

8. My button 1 / Youtube (*)

9. My button 2 (**)

10. Coloured buttons (Red, Green, Yellow, Blue)

11. Mono-Stereo Dual I-II / Current language

12. Fast rewind (in media browser mode)

13. Pause (in media browser mode) / Timeshift

recording

14. Programme recording

15. Play (in media browser mode)

16. Stop (in media browser mode)

17. Fast forward (in media browser mode)

18. Subtitle on-off / Subtitle (in media browser

mode)

19. Image size

20. Teletext - Mix

21. Media Browser

22. Electronic programme guide

23. Exit

24. Navigation buttons

25. Quick menu

26. Info / Reveal (in TXT mode)

27. Programme up/down

28. Mute

29. Previous programme / Now (in EPG mode)

30. Numeric buttons

31. AV / Source

NOTE: The Remote Control range is approximately 7m

/ 23ft.

Using My button 1 (*)

This button’s main function is to run Youtube link. However,

if you want to change this function, you can press MY

BUTTON 1 for ve seconds when on a desired source,

channel or link, until the “MY BUTTON IS SET” message

is displayed on the screen. This conrms that the selected

MY BUTTON is now associated with the selected function.

Note that if you perform rst time installation, MY BUTTON

1 will return to its default function.

Using My Button 2 (**)

This button’s main function is to switch to DVB-T,

broadcasts. However, if you press MY BUTTON 2 for

ve seconds, you can set a function to it as described

in My Button 1.

Note that if you perform a first time installation, MY

BUTTON 2 will return to its default function.

English - 6 -

Connections

NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection cables to

enable connection. See the illustrations above. | To enable PC audio, you will need to use the PC/YPBPR CONNECTION

cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to

AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via

the scart socket. | When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of

the TV before mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer

to the module instruction manual for details of the settings.

AV Connection

Cable (supplied)

Scart

Connection

(back)

VGA

Connection

(back)

PC/YPbPr Audio

Connection

(back)

HDMI

Connection

(back & side)

S/PDIF Optical Out

(back)

S/PDIF

Side AV

Connection

(side)

Headphone

Connection

(side)

USB

Connection

(side)

Connector Type Cables Device

Y BPRP

AUDIO L&R

SIDE AV

HEADPHONE

YPbPr Video

Connection

(back)

Connection

(side)

CAM

module

Subwoofer

Connection

(back)

English - 7 -

Inserting the Batteries into the Remote Control

1. Lift the cover on the back of the remote upward

gently.

2. Install two AAA batteries. Make sure to match

the + and - ends of the batteries in the battery

compartment (observe the correct polarity).

3. Replace the cover.

Connect Power & Antenna

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the aerial cable

into the ANT socket on your TV.

HDMI 1

HDMI 2

SPDIF

Coax.OUT

HDMI 1

HDMI 2

SPDIF

Coax.OUT

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

Then the standby LED lights up.

To switch on the TV from standby mode either:

Press the “

” button, P+ / P- or a numeric button on

the remote control.

Press the control switch located on the left side of the

TV. The TV will then switch on.

To Switch the TV Off

Press the “ ” button on the remote control or press

and hold the control switch on the TV until the TV

shuts down, so the TV will switch to standby mode.

To power down the TV completely, unplug the power

cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the rst time, the “language

selection” menu appears. The message “Welcome

please select your language!” is displayed and all

language options are listed alphabetically.

Press the “ ” or “ ” button to highlight the required

language, press OK button to select. “First Time

Installation” appears. Use “

” or “ ” button to set the

required country, and press “ ” button to select Search

Type. Use “

” or “ ” to set the desired search type.

Available search types are digital and analog, digital only

and analog only. When set, press “

” to select Teletext

Language. Use “ ” or “ ” button to set the “Teletext

Language” and select “Scan Encrypted” using “ ” or “

” button. You can set Scan Encrypted as Yes if you

want to scan coded stations.

Default PIN code can change depending on the

selected country. If you are asked to enter a PIN

code for viewing a menu option, use one of the

following codes: 4725, 0000 or 1234.

Press OK button on the remote control to continue and

the following message will be displayed on the screen.

English - 8 -

You can activate Store mode option by using “ ”

or “ ” button. If Store Mode is selected, Store mode

option will be available in other settings menu and your

TV’s features will be illustrated on the top of the

screen. A conrmation screen will be displayed after

selecting the Store Mode. Select YES to proceed.

If Home Mode is selected, Store mode will not be

available after the First Time Installation. Press OK

button on the remote control to continue and the

following message will be displayed on the screen.

You must select YES to search and store broadcasts.

The television will search for digital terrestrial TV

broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, the Channel

List will be displayed on the screen. If you are satised

with the order of channels press the OK button to quit

the channel list and watch TV.

Media Playback via USB Input

You can connect a USB hard disk drive or USB

memory stick to your TV by using the USB inputs of

the TV. This feature allows you to play les stored in

a USB drive. 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives are supported.

IMPORTANT! You should back up your les before

making any connections to the TV set in order to avoid

any possible data loss. The Manufacturer will not be

responsible for any le damage or data loss. It is

possible that certain types of USB devices (e.g. MP3

Players) or USB hard disk drives/memory sticks may

not be compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks. Note: While

formatting a USB hard disk that has 1TB (Tera Byte)

or more le capacity, you can experience problems

with the formatting process.

Quickly plugging and unplugging USB devices is a

very hazardous operation. This may cause physical

damage to the USB player and the USB device itself.

Do not pull out the USB module while playing a le.

Media Browser Menu

You can play photo, music, and movie les stored

on a USB disk by connecting it to your TV. Connect

a USB disk to one of the USB inputs located on the

side of the TV.

The USB selection OSD will be displayed on the screen.

Press the MENU button and select the Media Browser

tab by using the Left/Right and OK buttons. The Main

media browser screen will be displayed. You can display

the approprite content by selecting the Video, Music or

Picture tab. Follow the button indications under each on

screen menu for media playback features.

Pressing the MENU button while in the Media Browser

mode will access the Picture, Sound and Settings menu

options. Pressing the MENU button again will exit from

this screen.

You can set your Media Browser preferences by using

the Settings menu.

English - 9 -

Note: If two USB devices are connected to the TV at

the same time, the rst USB device connected to the

TV will be named USB drive 1. Select the drive by

using “

” or “ ” buttons and press OK.

Quick Menu

The Quick Settings menu allows you to access some

options quickly. This menu includes Power Save Mode,

Picture Mode, Equalizer Settings, Favourites and

Sleep Timer options.

Press Q.MENU button on the remote control to view

the quick menu. See the following chapters for details

of the listed features.

Changing Image Size: Picture Formats

Programmes can be watched in different picture formats,

depending on the transmission received. You can

change the aspect ratio (image size) of the TV for viewing

the picture in different zoom modes. Press the “

SCREEN” button repeatedly to change the image size.

You can shift the screen up or down by using “ ”

or “ ” buttons while in 14:9 Zoom, Cinema or

Subtitle.

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options. Press the MENU button to view the main

menu. Select the Channel List item by using Left or

Right button. Press OK to view menu contents. Select

Edit Channel List to manage all stored channels.

Use Up or Down and OK buttons to select Edit

Channel List. Press the Up or Down button to select

the channel that will be processed. Press the Left or

Right button to select a function on the Channel List

menu. Use P+/P- buttons to move page up or down.

Press MENU button to exit.

Sorting Channel List

You can select which broadcasts will be listed in the

channel list. To display specic types of broadcast,

you should use the Active channel list setting. Select

the Active channel list from the Channel list menu

by using “

” or “ ” button. Press the OK button to

continue. You can select a network type option from

the list by using “

” or “ ” and OK buttons.

English - 10 -

Menu Features and Functions

Picture Menu Contents

Mode

For your viewing requirements, you can set the related mode option. Picture mode

can be set to one of these options: Cinema,Game,Sports, Dynamic and Natural.

Contrast Sets the lightness and darkness values of the screen.

Brightness

Sets the brightness value for the screen.

Sharpness Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

Power Save

Mode

To set Power Save Mode as Eco, Picture Off and Disabled. See the section, “Environmental

Information” in this manual for further information on Power Save Mode.

Backlight

(optional)

This setting controls the backlight level and it can be set to Auto, Maximum, Minimum

and Eco Mode. Backlight function will be inactive if Power Save Mode is set to On.

Backlight cannot be activated in VGA, Media Browser mode or while the picture mode

is set to Game.

Noise

Reduction

If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting

to reduce the noise amount. Noise Reduction can be set to one of these options: Low,

Medium, High or Off.

Advanced Setting

Dynamic

Contrast

You can change contrast rate by using dynamic contrast function. Dynamic contrast

can be set to one of these options: Low, Medium, High or Off.

Colour Temp Sets the desired colour tone.

Picture Zoom

Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.

Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage

switching).

HDMI True

Black (optional)

While watching from HDMI source, this feature will be visible in the Picture Settings

menu. You can use this feature to enhance blackness in the picture.

Film Mode

(optional)

Films are recorded at a different number of frames per second to normal television

programmes. Turn this feature on when you are watching lms to see the fast motion

scenes clearly.

Skin Tone Adjust the desired skin tone.

Colour Shift

Adjust the desired colour tone.

RGB Gain

Press OK button to edit RGB gain. You can congure the colour temperature values

using the RGB Gain feature.

Reset

Resets the picture settings to factory default settings.

Autoposition (in

PC mode)

Automatically optimizes the display. Press OK to optimize.

H Position (in

PC mode)

This item shifts the image horizontally to right hand side or left hand side of the screen.

V Position (in

PC mode)

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock (in

PC mode)

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase (in PC

mode)

Depending on the resolution and scan frequency that you input to the TV set, you may

see a hazy or noisy picture on the screen. In such a case you can use this item to get

a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings

will be added to the Picture Settings while in PC mode.

English - 11 -

Menu Features and Functions

Sound Menu Contents

Volume Adjusts volume level.

Equalizer:

In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat,

Classic and User. Press the MENU button to return to the previous menu.

Equalizer menu settings can be changed manually only when the Equalizer

Mode is in User.

Balance This setting is used for emphasizing left or right speaker balance.

Headphone

Sets headphone volume.

Sound Mode

You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel

supports that mode.

AVL

Automatic Volume Limiting (AVL) function sets the sound to obtain xed output

level between programmes (For instance, volume level of advertisements tend

to be louder than programmes).

Headphone/Lineout

When you connect an external amplier to your TV using the headphone jack,

you can select this option as Lineout. If you have connected headphones to the

TV, set this option as Headphone.

Dynamic Bass

(Optional)

Enables or disables the Dynamic Bass.

Surround Sound

(Optional)

Surround sound mode can be changed as On or Off.

Digital Out Sets digital out audio type.

Install and Retune Menu Contents

Automatic Channel

Scan (Retune)

Displays automatic tuning options.

Digital Aerial: Searches and stores aerial DVB stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores aerial DVB and analogue

stations.

Digital Cable & Analogue: Searches and stores cable DVB and analogue

stations.

Manual Channel Scan This feature can be used for direct broadcast entry.

Network Channel

Scan (Optional)

Searches for the linked channels in the broadcast system.

Analogue Fine Tune

You can use this setting for ne tuning analogue channels. This feature is not

available if no analogue channels are stored.

First Time Installation

Deletes all stored channels and settings, resets TV to factory settings and starts

rst time installation. You can follow the instructions in the Initial Installation section

for more information on this process.

Clear Service List

(Optional)

(*) This setting is visible only when the Country option is set to Denmark, Sweden,

Norway or Finland. Use this setting to clear channels stored.

English - 12 -

Menu Features and Functions

Settings Menu Contents

Conditional Access Controls conditional access modules when available.

Language Congures language settings.

Parental

Congures parental settings.

Default PIN code can change depending on the selected country. If you are asked

to enter a PIN code for viewing a menu option, use one of the following codes:

4725, 0000 or 1234.

Timers

Sets timers for selected programmes. (USB Record)

Recording

Conguration

Displays the recording conguration menu.

Date/Time

Sets date and time.

Note:

* The TV takes the time info via the broadcast. Correct time will be available on

Date/Time Settings, if the time info is provided in the broadcast.

If the TV is in no channel mode, Date/Time settings can be changed. However, if

there is a channel preset, only “Time Settings Mode” can be changed and if this is

set to Manual, Time Zone will be enabled.

* If the TV is switched to standby mode and switched on later and there is no

broadcast available, time information will not be updated. If there is a present

broadcast; however, time information will be taken via the broadcast. In other

words, time information will be available according to these priorities: The TV rst

looks for the time info in the broadcast, then to the user preference, and lastly to

the teletext time information.

Sources Enables or disables selected source options.

Network Settings

Displays network settings.

Other Settings: Displays other setting options of the TV set:

Menu Timeout Changes timeout duration for menu screens.

Scan Encrypted

When this setting is on, the search process will locate encrypted channels as well. If it is set as

Off, encrypted channels will not be located in automatic or manual searches.

Blue Background Activates or deactivates the blue background system when the signal is weak or absent.

Software Upgrade

To ensure that your TV always has the most up to date rmware. Please ensure

that the TV is set to standby mode with an aerial connected to pick up the over air

download.

Application Version Displays application version.

Hard of Hearing Enables any special feature sent from the broadcaster.

Audio Description

Audio description refers to an additional narration track for blind and visually impaired

viewers of visual media, including television and movies. You can use this feature,

only if the broadcaster supports the additional narration track.

Auto TV Off

You can set the timeout value of the auto off feature. After the timeout value is

reached and the TV has not been operated for a selected time, the TV will go into

standby mode.

English - 13 -

Menu Features and Functions

Standby Search

(optional)

If you change Standby Search to Off, this function will be unavailable. To use Standby

search please make sure that you select Standby Search as On. If the Standby

Search is set to On, when the TV is in standby mode, available broadcasts will be

searched. If the TV locates any new or missing broadcasts, a menu screen will be

displayed, asking you whether or not to execute these changes. The Channel list

will be updated and changed after this process. Please activate the Standby Search

setting in order to enable your TV to automatically update the broadcast frequency

of the broadcaster, broadcast denition and other similar changes.

Store Mode

If you are displaying the TV in a store, you can activate this mode. Whilst Store

Mode is enabled, some items in the TV menu may not be available.

DLNA Renderer

DLNA feature allows you to share les stored on your smartphone. If you have a

DLNA compatible smartphone and the appropriate software is installed, you can play

photos on your TV. See instructions of your sharing software for more information.

Power Up Mode

Standby: The TV powers up into Standby mode when the TV is plugged into the

mains.

Last State: The TV powers up into On mode when the TV is plugged into the mains

and the last channel/source is selected.

Virtual Remote

(Optional)

Enable or disable the virtual remote feature.

English - 14 -

Electronic Programme Guide (EPG)

Some, but not all channels send information about the

current and next programmes. Press the “ - EPG”

button to view the EPG menu.

Up/Down/Left/Right: Navigate EPG.

OK: Displays programme options.

INF(İ): Displays, in detail, information on the

programme selected.

GREEN: Switches to List Schedule EPG.

YELLOW: Switches to Timeline Schedule EPG.

BLUE: displays ltering options.

(RECORD): the TV will start to record the selected

progamme. You can press again to stop the recording.

IMPORTANT: To record a programme, you should first

connect a USB disk to your TV while the TV is switched off.

You should then switch on the TV to enable the recording

feature. Otherwise, the recording feature will not be available.

Note: Switching to a different broadcast or source is not

available during a recording.

Programme Options

In the EPG menu, press the OK button to enter the

Event Options menu.

Select Channel

In the EPG menu, using this option, you can switch

to the selected channel.

Record / Delete Record Timer

After you have selected a programme in the EPG

menu, press the OK button and the Options screen

will be displayed. Select the “Record” option and

press the OK button. After this operation, a recording

will be sheduled for the selected programme.

To cancel an already set recording, highlight that

programme and press the OK button and select the

option “Delete Rec. Timer”. The recording will be

cancelled.

Set Timer / Delete Timer

After you have selected a programme in the EPG

menu, press the OK button and the Options screen

will be displayed. Select the “Set Timer on Event”

option and press the OK button. You can set a timer

for future programmes. To cancel an already set timer,

highlight that programme and press the OK button.

Then select “Delete Timer” option. The timer will be

cancelled.

Note: It is not possible to record two channels at the same

time.

Recording a Programme

IMPORTANT: When using a new USB hard disk drive, it is

recommended that you rst format the disk using your TV’s

“Format Disk” option.

To record a programme, you should rst connect a

USB disk to your TV while the TV is switched off. You

should then switch on the TV to enable the recording

feature.

To use the recording function, you need to connect

a USB disk or an external hard disk drive to the TV

and the connected USB disk should have at least 1GB

capacity and should have 2.0 speed compatibility.

If the connected USB device does not support 2.0

speed, an error message will be displayed.

Note: Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings onto a

computer; however, these les will not be available to be

played on a computer. You can play the recordings only

via your TV.

Note: Lip Sync delay may occur during the timeshifting.

Radio recording is not supported. The TV can record

programmes up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

sufcient, the recording may fail and the timeshifting

feature may not be available.

Recordings of HD programmes can occupy more

space on the USB disk compared to SD programmes.

For this reason it is recommended to use a USB hard

disk drive to record HD programmes.

Do not unplug the USB/HDD during a recording. This

may harm the connected USB/HDD.

Multipartiton support is available. A maximum of

two different partitions are supported. If the disk has

more than two partitions, a crash may occur. The

rst partition of the USB disk is used for PVR ready

features. It also must be formatted as the primary

partition to be used for the PVR ready features.

Some stream packets may not be recorded because

of signal problems, so sometimes the video may

freeze during playback.

English - 15 -

Record, Play, Pause, Display (for PlayListDialog) keys

can not be used when teletext is ON. If a recording

starts from the timer when teletext is ON, teletext

is automatically turned off. Also teletext usage is

disabled when there is an ongoing recording or

playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast

to activate timeshifting mode. In timeshifting mode,

the programme is paused and simultaneously

recorded to the connected USB disk. Press (PLAY)

button again to resume the paused programme from

where you stopped. You will see the timeshift gap

between the real and the timeshifted programme in

the info bar.

Instant Recording

Press (RECORD) button to start recording an

event instantly while watching a programme. You can

press (RECORD) button on the remote control

again to record the next event on the EPG. In this

case, the OSD will display the programmed events

for recording. Press (STOP) button to cancel instant

recording.

Note: You can not switch broadcasts or view the Media

Browser during the recording mode.

Watching Recorded Programmes

In the main menu, use “ ” or “ ” buttons to select the

Media Browser. Highlight the Recordings Library

using “

” or “ ” button and press the OK button to

enter the Recordings Library. Select a recorded item

from the list (if previously recorded) by using “

” or

“ ” buttons. Press the OK button to view the Play

Options. Select an option by using “ ” or “ ” or

OK buttons.

Available playback options:

• Play from start: Plays the recording from the

beginning.

• Resume: Resumes Playback from the point at which

you stopped playback previously.

• Play from offset: Species a playing point.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the (STOP) button to stop a playback and

return to the Recordings Library.

Slow Forward

If you press

(PAUSE) button while watching

recorded programmes, the slow forward feature will

be available. You can use

button to slow forward.

Pressing

button consecutively will change slow

forwarding speed.

Recordings Library

To view the list of recordings, select “Recordings

Library” and press the OK button. The Recordings

Library will then be displayed with available recordings.

All the recordings are kept in a list in the recordings

library.

RED button (Delete) :Erases the selected recording.

GREEN button (Edit): Makes changes on the

selected recording.

BLUE button (Sort): Changes the order of the

recordings. You can select from a wide range of

sorting options.

OK button: Activates the play options menu:

: Resume Playback.

INFO (Details): Displays the programme information

details.

RecordingConguration

Select the Recording Configuration item in the

Settings menu to congure the recording settings.

Format Disk: You can use the Format Disk feature

for formatting the connected USB disk. IMPORTANT:

Note that ALL the data stored on the USB disk will

be lost and the disk format will be converted to

FAT32 if you activate this feature. If your USB disk

malfunctions, you can try formatting the USB disk. In

most cases formatting the USB disk will restore normal

operation; however, ALL the data stored on the USB

disk will be lost in such a case.

Note: If “USB is too slow” message is displayed on the

screen while starting a recording, try restarting the recording.

If you still get the same error, it is possible that your USB

disk does not meet the speed requirements. Try connecting

another USB disk.

Product Safety

• Do not drop objects on the product or knock the

product forcefully. This may result in an electric

shock or re.

• Do not use your product near a humidier or kitchen

counter. This may result in an electric shock or re.

• Do not disassemble, repair or modify the product

or its parts. Doing so may result in damage to the

product or a malfunction.

English - 16 -

• PC/HDD/Media Player or any other devices that are

DLNA 1.5 compatible should be used with a wired

connection for higher playback quality.

To congure wired settingsplease refer to the

Network Settings section in the Settings menu.

• You might be able to connect your TV to your LAN

depending on your network’s conguration. In such

a case, use an ethernet cable to connect your TV

directly to the network wall outlet.

The modem port

on the wall

Rear of TV

ConguringWiredDeviceSettings

The Network type can be selected as Wired or

Wireless, in accordance with the active connection to

the TV set. Select this as “Wired” if you are connecting

via an ethernet.

CongurationStatus

This section displays the status of the connection.

Select Connected if you want to activate a connection.

Select as Not Connected to end an active connection.

IP Address

If an active connection is available, the IP address will

be displayed on this section. If you want to congure

an IP address preference, press the GREEN button

and switch to the advanced mode.

ConguringWiredNetworkSettingsin

Advanced Mode

After pressing the GREEN button, the “Advanced

mode” will be available. While in Advanced Mode,

press the RED button to edit settings. When nished,

press OK to save, Press RETURN/BACK to cancel

• Do not spray cleaner directly onto the surface of the

product.This may result in discoloration and cracks

and may cause the screen display to peel off.

• Do not let water come into contact with the product

when cleaning it. Ensure that water does not enter

the product. This may result in an electric shock

or re.

• Since the surface of the product is easily scratched,

make sure you clean the product with a soft cloth. As

the product may be scratched if there is any foreign

material on the cloth, make sure to shake off any

dust before using it.

• Do not scratch the surface of the display screen with

a sharp tool or clean it using chemicals. This may

degrade the screen quality.

• Do not apply force to the display screen.

• Do not drop or bend the product.

Wired Connectivity

To Connect to a Wired Network

For connecting to a wired LAN, you should

perform the following steps:

• You must have a modem/router connected to an

active broadband connection.

• Ensure that Nero Media Home software is installed

to your PC (for DLNA function). See Appendix G for

more information on the installation process.

• Connect your PC to your modem/router. This can

be a wired or wireless connection.

• Connect your TV to your modem/router via an

ethernet cable. There is a LAN port at the rear

(back) of your TV.

Lan(Ethernet cable)

Broadband ISP

Connection

Rear of TV

• To access and play shared les, you must select the

Media Browser. Press the Menu button and select

Media Browser by using the “ ” or “ ” buttons and

press OK to continue. Select the desired le type and

press OK. You must always use the Media Browser

screen to access and play shared network les.

English - 17 -

Wireless Connectivity

Connecting to a Wireless Network

IMPORTANT: USB dongle (supplied) is required to

use wireless network features.

• To use your TV with your wireless network, you need

a Wireless USB dongle. To make your modem’ s

SSID visible, you should change your SSID settings

via the modem’s software. The TV cannot connect

to the networks with a hidden SSID.

To Connect to a wireless LAN, you should perform

the following steps:

1. Ensure that Nero Media Home software is

installed to your PC (for DLNA function).

2. Then connect the wireless adaptor to one of the

USB inputs of the TV.

3. To congure your wireless settings please refer to

Network settings section in this manual.

Wireless Lan

Adaptor

USB Inputs (Side of the TV)

Broadband ISP

Connection

• A Wireless-N router (IEEE 802.11a/b/g/n) with

simultaneous 2.4 and 5 GHz bands is designed

to increase bandwidth. These are optimized for

smoother and faster HD video streaming, file

transfers, and wireless gaming.

• Use a LAN connection for quicker file sharing

between other devices like computers.

• The frequency and channel differ depending on

the area.

• The transmission speed differs depending on the

distance and number of obstructions between the

transmission products, the conguration of these

products, the radio wave conditions, the line trafc,

and the products that you use. The transmission may

also be cut off or may get disconnected depending

on the radio wave conditions, DECT phones, or any

other WiFi 11b appliances. The standard values of

the transmission speed are the theoretical maximum

values for the wireless standards. They are not the

actual speeds of data transmission.

• The location where the transmission is most effective

differs depending on the usage environment.

• The Wireless LAN adaptor should be connected directly

to the TV’s USB port. USB hubs are not supported.

• You can plug your wi dongle into the supplied dock

In cases where network quality is poor and the wi

dongle needs to be placed to a location with better

signal quality.

• To congure wireless settings please refer to the

WiFi section in the Settings menu.

• Wireless LAN adaptor supports 802.11 a,b,g &

n type modems. It is highly recommended that

you should use the IEEE 802.11n communication

protocol in order to avoid any possible problems

while watching videos.

• Use the other USB input, if you experience problems

with audio/video performance.

• You must change your modem’s SSID when there are

any other modems around with the same SSID. You

can encounter connection problems otherwise. Use

a wired connection if you experience problems with a

wireless connection.

To enable Wi-Fi features, plug in the Wi-Fi dongle to

one of the USB ports.

Press the YELLOW button to scan the wireless

networks from the network settings menu. A list of

available networks will be displayed. Please select

your desired network from the list.

Note: If the modem supports N mode, you should set N

mode settings.

If the selected network is protected with a password, please

enter the correct key by using the virtual keyboard. You can

use this keyboard via the navigation buttons (“

” or “

”, “ ” or “ ”) and the OK button on the remote control.

English - 18 -

Wait until the IP address is shown on the screen.

Press the GREEN button to switch to advanced

mode and then press the OK button to edit settings.

This means that the connection is now established.

To disconnect from a wireless network, you should

highlight CongurationStatus and press OK.

You can navigate between menu tabs by pressing

left/right buttons. The help bar on the bottom of the

dialog shows features that you may use. Press the

BLUE button to check your internet connection speed.

You can check the signal strength by using the network

settings menu for the wireless device mode.

Other Information

Configuration Status: Displays Wi-Fi status as

connected or not connected.

IP Address: Displays the current IP address.

Network Name: Connected networks’ name will be

displayed.

DeleteSavedWiFiProles

Saved proles will be deleted if you press the Red

button while the wireless device selection OSD is

on the screen.

Connecting to your mobile Phone via WiFi

If your mobile phone has WiFi feature, you can

connect your mobile phone to your TV by using a

WiFi connection via a router, in order to play content

from your phone. For this, your cell phone must have

appropriate sharing software.

• Connect to your router following the steps stated

above in the Wireless Connection section.

• Afterwards, engage your cell phone with the router

and then activate the sharing software on your cell

phone. Then, select les that you would like to share

with your TV.

• If the connection is established correctly, you should

now be able to access the shared les from your cell

phone via the Media Browser of your TV.

• Enter the Media Browser menu and the playback

device selection OSD will be displayed. Select your

mobile phone and press the OK button to continue.

Note: This feature may not be supported on all mobile

phones.

Connectivity Troubleshooting

Wireless Network Not Available

• Ensure that any rewalls of your network allow

the TV wireless connection.

• Ensure the USB WiFi dongle (supplied) is

plugged in fully.

• If the wireless network does not function properly,

try using the wired network in your home. Refer

to the Wired Connection section for more

information on the process.

If the TV does not function using the wired connection,

check the modem (router). If the router does not

have a problem, check the internet connection of

your modem.

Try searching for wireless networks again, using the

Network Settings menu screen.

Connection is slow

See the instruction book of your wireless modem to get

information on the internal service area, connection

speed, signal quality and other settings. You need to

have a high speed connection for your modem.

Distruption during playback or slow

reactions

You could try the following in such a case:

Keep at least three meters distance from microwave

ovens, mobile telephones, bluetooth devices or any

other Wi-Fi compatible devices. Try changing the

active channel on the WLAN router.

Using DLNA Network Service

DLNA (Digital Living Network Alliance) is a standard

that eases the viewing process of digital electronics

and makes them more convenient to use on a home

network. For further information, visit www.dlna.org.

The DLNA standard allows you to view and play

photos, music and videos stored in the DLNA media

server connected to your home network.

1. Nero Media Home Installation

The DLNA function cannot be used if the server

program is not installed on to your PC. Please

prepare your PC with the provided Nero Media

Home programme. For more information about the

installation, please refer to appendix A.

2. Connect to a Wired or Wireless Network

See the chapter Network Settings for detailed

conguration information.

3. Play Shared Files via Media Browser

Select Media Browser by using the “ ” or “ ” buttons

from the main menu and press OK. The Media

browser will then be displayed.

English - 19 -

DLNA

DLNA support is only available in the Media Browser

folder mode. To enable folder mode, go to the

Settings tab in the main media browser screen and

press OK. In the settings options, highlight View Style

and change to Folder using the “

” or “ ” buttons.

Select the desired media type and press OK.

If sharing congurations are set properly, the following

OSD message will be displayed after selecting the

desired media type. Select OK to display the selected

network or USB memory content. If you want to refresh

the device list, press the GREEN button. You can

press MENU to exit.

If available networks are found, they will be listed on

this screen. Select media server or network that you

want to connect to using the “ ” or “ ” buttons and

press OK.

If you select the media type as Video and choose a

device from the selection menu, a new menu screen

will appear on the screen as below:

Select Videos from this screen to list all the available

video les from the selected network.

To play other media types from this screen, you must

go back to main Media Browser screen and select

the media type as desired and then perform the

network selection again. Refer to the Media Browser

USB Playback section for further information on le

playback.

Subtitle les do not work if you watch videos from your

network through DLNA.

You can connect only one television with DLNA to

the same network. If a problem occurs with the DLNA

network, please switch your television off at the wall

socket and back on again. Trick mode and jump are

not supported with the DLNA function.

Note: There may be some PC’s which may not be able

to utilize the DLNA function due to administrator and

security settings (such as business PC’s).

For best home network streaming with this TV, the

supplied Nero software should be installed.

Internet Portal

You can access PORTAL mode using your TV. To do

this, an active internet connection is required. Follow

the steps on Connecting to a Wired/Wireless(optional)

Network section to connect your TV to internet. After

the connection is established, you can select or view

portal options.

Note: Broadband internet connection is required

for high quality viewing. Ensure that the internet

connection is made properly. You must set the

Country and Language data correctly in the First Time

Installation for the proper operation of internet portal.

Press “

” button on your remote control and portal

application options will be displayed. Application

options will be displayed as the template below.

Available applications’ contents may change

depending on the application content provider.

Note on PIP Window

If you switch to portal mode while watching TV

channels, current programme will be displayed on

the PIP window. You can change channels using

P+/P- buttons.

Current HDMI content will be displayed on the PIP

window, if you switch to portal mode while watching

HDMI source.

Use the “

” or “ ”, “ ” or “ ” to navigate between

the items on Portal screen. Press the OK button to

conrm your selection. Press the BACK button to go

to the previous screen.

Press the EXIT button to quit the Internet portal mode.

Page is loading ...

Finlux 50F8090S-T User manual

Brand: Finlux

Model: 50F8090S-T

Category: LCD TVs

Type: User manual

Download PDF

report