The bioBidet P-770 is an advanced smart toilet with various features that promote hygiene and user comfort. It offers hands-free operation, a heated seat, a warm air dryer, and customizable cleansing and drying settings. Notable features include a remote control for convenient operation, an automatic open/close seat function, and a night light for added visibility in low-light conditions. Additionally, it has an energy-saving mode to conserve power when not in use and a self-cleaning nozzle for maintaining hygiene.
The bioBidet P-770 is an advanced smart toilet with various features that promote hygiene and user comfort. It offers hands-free operation, a heated seat, a warm air dryer, and customizable cleansing and drying settings. Notable features include a remote control for convenient operation, an automatic open/close seat function, and a night light for added visibility in low-light conditions. Additionally, it has an energy-saving mode to conserve power when not in use and a self-cleaning nozzle for maintaining hygiene.
Next Generation Integrated Smart Toilet
1
Functions...........................................
Parts..................................................
Economy Features..............................
Safety Guidelines................................
Preparing For Use...............................
How To Use........................................
Adjusting Temperature...................
Adjusting and Using Functions........
Flushing........................................
Maintenance......................................
Troubleshooting.................................
Warranty...........................................
Specifications....................................
3
4
6
7
8
10
11
11
12
14
15
17
21
22
2
Activates a manual flush. Can be used during a power failure.
Extends nozzle for manual cleaning.
(P770)
Automatically flushes the toilet when the user stands up.
Automatic sensors detect motion and activate the night light.
This function can be enabled or disabled on the remote control.
Stand in front of the toilet to automatically open the lid.
Move away from the toilet to automatically close the lid.
Reduces bathroom odors.
Saves power when not in use.
Automatically turns off power when a short circuit occurs.
Seat temperature turns off to protect user from burns after 30 minutes
of use.
Operates all bidet functions.
Standard
Antibacterial
Sanitary
Comfort
Safety
Automatically detects any malfunctions before use.
Automatically cleans nozzle before & after use.
Operation Light
Special non-stick coating on bowl.
Specially coated nozzle, seat, and lid protects against bacteria.
Emergency button bypasses the remote control.
1.6 gallon flush.
1.05 gallon flush.
Indicates current operation.
(power, seat sensor, power saving, seat temp, water temp)
Adjusts dryer temperature.
Combines oscillating and pulsating features.
Activates dryer.
Helps relieve constipation.
Cleanse with back and forth nozzle movement.
Rhythmic stream of water for thorough cleansing.
Night Light
3
Stainless Nozzle
Hose
Power
4
P700
Open Seat / Lid
Close Seat / Lid
P770
P770
5
P700
P770
Save water by pressing the appropriate
flush button for each use.
Turn off the power during
extended travel to save energy.
(2+ days)
When active, the temperature will be
maintained at 86°F. Using the seat
disables this feature for one hour.
Use the preferred flush button.
Power Saving Mode
Economy Features
6
Make sure the temperature of the bathroom does not fall under 40°F.
When water freezes, it can break the water supply line or internal
components and cause malfunctions.
Notice: Observe electrical safety standards. Make sure the unit is
properly grounded.
Discontinue use of the unit, unplug the power cable, and close the shutoff
valve in any of the following circumstances:
- Water is leaking from the main body or hose connections.
- The product is broken, cracked, or producing
an unusual sound.
- The product is overheating, or emitting smoke
or a foul odor.
Continued use of the unit when it is not functioning properly can cause
leaks or electric shock.
The following actions are not recommended and can cause product
malfunctions and or safety hazards:
Touching the power cord with wet hands.
Placing fire sources near the product.
Stepping on or placing heavy objects on the product.
Blocking the dryer.
Placing foreign objects into the toilet other than toilet paper.
Placing foreign objects into the toilet other than toilet paper.
Cleaning the unit with harsh chemicals or detergents.
Connect the hose tightly to prevent leakage.
If water leaks, close the shutoff valve immediately.
Safety Guidelines
7
Preparing For Use
Notice
Proper Battery Care
Settings (temperature, auto flush) may reset after replacing the batteries.
Configure the settings again.
Observe the following to prevent battery breakage or leaks.
1. Remove the remote from the
bracket by holding both sides
and lifting up.
2. Open the battery cover on the back.
3. Put 3 AA batteries in order.
4. Close the cover.
Remove batteries when not using the remote control for a long time.
Do not use rechargeable batteries.
Place the batteries into the remote control
8
If the water pressure is too high, water may splash or overflow when flushing the toilet.
Turn the water shutoff valve clockwise to reduce pressure.
Is the operation light on? Is the seat light on?
Remote Control
light.
9
Combines oscillating and pulsating.
Option 3Option 1 Option 2
Notice
- Stops all cleaning and dry functions.
- Operates dry feature for 3 minutes.
Optional Comfort Settings
Sit towards the center of the seat to prevent water from splashing.
Spray pulsates while washing.
- Press one of the cleansing functions above on the remote control.
- Adjust the nozzle position and water pressure to your preferred settings.
- Each function operates for one minute.
- The sensor light will turn on.
- Only operates after being occupied.
10
Dryer Temperature
of the seat, water, and dryer up to 3 levels.
Off
Off
Off
- When you activate the seat temperature,
the seat light will be turned on in the display
area of the main body.
- When you activate the water temperature,
the water light will be turned on in the
display area of the main body.
93°F
99°F
104°F
93°F
99°F
104°F
The temperature of the seat and dryer can be adjusted with the remote control.
Low Med High
11
using the
button to turn on the power saving light on the main body.
button again to turn off the display light.
button again to turn off the function.
button to turn on the function.
Power saving mode automatically turns off when seated and turns back on when you
stand up.
( It works for up to 20 minutes while occupied, and another 1 minute after
standing up. )
button again when finished.
*Do not push or pull
the nozzle forcibly.
The nozzle begins at the middle position each time you activate a wash.
86°F.6°F.
12
Press the Auto lid button to turn the function on. The light indicates the function is on.
Press again to turn the function off.
Activate the automatic open/close feature on your remote.
Choose the seat or lid function
by pressing the corresponding
button on the remote control.
Seat and Lid Operation
There are 2 ways to operate the seat and lid:
Automatic and remote control.
(P770 Only)
(P770 Only)
13
Secondary
Main Body
Controls
Press the full flush or small flush
button on the remote control.
Manual Flush
There are 3 ways to flush the toilet: Remote Control, Auto Flush, and Manual Flush.
to turn the light on.
The toilet will automatically
flush after standing up.
14
Carefully read the following procedures.
- Clean with a wet cloth.
- Clean with a soft wet cloth
and mild detergent. Dry
thoroughly after cleaning.
Deep Cleaning
Regular Maintenance
Routine Cleaning
Turn off the Auto Flush feature before performing any maintenance.
Do not use harsh detergents when cleaning to avoid discoloring.
The BioMist Bidet Cleaner is the recommended cleaning method.
15
Resecure the filter
Locate the filter beneath the bidet and pull it
forward.
Take the following steps when cleaning the deodorizer filter.
Notice
Deodorizer Filter (as necessary)
Using a toothbrush, remove dust particles from
the filter.
16
If the product is not functioning properly, check the following troubleshooting
tips. If the problem persists, please contact Bio Bidet support.
Make skin contact with the
seat sensor.
Make skin contact with the
seat sensor.
.
Is the seat sensor activated?
Is power saving mode turned on?
The water temperature is set
lower and increases when
seated.
Is the temperature set to a low
level or turned off?
Turn off the water shutoff valve
and clean the hose out.
Is the water pressure set too low?
Is there any debris in the hose?
Is the hose crimped?
Is the seat sensor being activated?
Is the shutoff valve closed?
Troubleshooting
Press a cleansing function
button again.
Water stops in the
middle of cleansing.
The cleansing functions
automatically stop after five
minutes of use.
Increase the water pressure
and clean the nozzle.
Reposition the hose.
Water pressure is
too low.
Is the power out or circuit
breaker off?
Is the operation light on the
display panel off?
Wait until the power is restored,
or turn on the circuit breaker.
17
The seat is kept at a lower
temperature until activated.
Is power saving mode turned on?
Is the auto flushing turned off?
(When off, the flushing indication
on the remote control display panel
is off.)
Wipe the water with a
dry cloth.
Water flows into
the toilet for a few
seconds near the
nozzle when first
sitting down.
When the seat sensor is on, it
releases some water before
spraying. If you change the position
while seated, the sensor will turn on
and off, and release some additional
water.
Is the seat sensor blocked with
a wet towel?
18
Is the seat sensor activated?
Is the seat sensor activated?
Is the deodorizer filter clogged?
Wipe the affected areas clean.
Wipe the affected areas clean.
Is the transmitter or receiver
blocked?
Is the transmitter or receiver
dirty?
Is the transmitter or receiver
dirty?
Make skin contact with the
seat sensor.
Is the main body light on?
Clean the deodorizer fillter.
Set the deodorizer filter.
Deodorizer is
not working at all.
Deodorizer is
not working at all.
Deodorizer is
not very effective.
Re-insert the batteries properly.
Are the batteries running low?
Are the batteries running low?
Did you press the button
consecutively?
Are the batteries inserted
incorrectly?
19
.
Is the water shutoff valve closed?
Is the water supply suspended?
Turn off the water shutoff valve
and clean out the hose.
Did you change the batteries?
Did the power go out?
The setting may take up to
24 hours to function normally.
Is it unplugged?
Did you change the batteries?
Is the seat sensor activated?
It may stop if the user changes
position while sitting.
Did you activate another function?
Is the air temperature set to a low
level?
.
Dryer temperature
is too low.
The dryer stops
in progress.
The toilet is not
flushing sufficiently.
Is there any debris in the hose?
20
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
The bioBidet P-770 is an advanced smart toilet with various features that promote hygiene and user comfort. It offers hands-free operation, a heated seat, a warm air dryer, and customizable cleansing and drying settings. Notable features include a remote control for convenient operation, an automatic open/close seat function, and a night light for added visibility in low-light conditions. Additionally, it has an energy-saving mode to conserve power when not in use and a self-cleaning nozzle for maintaining hygiene.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
APEMAN M400 User manual
-
iDream ID-DPF151 Datasheet
-
Diversitech 230-MB14W Operating instructions
-
Sahara 1150017 Datasheet
-
PINTURA PNGR06NWS1 Dual Band Gigabit Router Operating instructions
-
Crown Boiler HTR3465 User manual
-
Sharper Image Comfysage Pillow User guide
-
Emerson FIELDVUEDVC2000 Quick start guide
-
TSL 1059 User guide
-
Sunnydaze Decor LY-221 Installation guide
