2. Accent Builders Hardware
  3. DS-2001CP

Accent Builders Hardware DS-2001CP, DS-2001SC Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Accent Builders Hardware DS-2001CP Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DS#2001!
Description:!Half!Dome!Floor!Type!Bumper
Material:!Zinc!Alloy!and!Rubber
Finishings7Available:!Bright!Brass!(US3),!Bright!Chrome!(US26),!
Antique!Brass!(US5),!Satin!Chrome!(US26D),!Satin!Nickel!(US15),!
Oil!Ru b b e d !Bronze!( US10B),!and!any!custom!finishing
Size:7(Diameter)!44!x!(Height)!2 5mm!!(1!inch!h eig ht)
Packaging:71!pc!+!Fastener/polybag
Installatio n 7Instructio n :7
1.! Open!the!door!to!the!point!where!you!want!it!to!stop.!Ensure!the!doorknob!is!approximately!2!inches!
from!the!wall.!!!
2.! Draw!a!line!where!the!door!opens!to!before!the!wall.!
3.! Find!a!spot!where!you’d!like!to!install!the!door!bumper!on!the!floor.!
4.! Make!a!pencil!mark!1/2!inch !a way!door!mark!line,!in!the!direction !o f!th e !d o o r's!s wing!whe n !o p e n ing .!
5.! Secure!the!do o r sto p !on!the!floor,!with!the!ru b ber!pad!facing!toward!the!door.!
!
!
!
!
/