Accent Builders Hardware DS-2001SC Installation guide

DS#2001!

Description:!Half!Dome!Floor!Type!Bumper

Material:!Zinc!Alloy!and!Rubber

Finishings7Available:!Bright!Brass!(US3),!Bright!Chrome!(US26),!

Antique!Brass!(US5),!Satin!Chrome!(US26D),!Satin!Nickel!(US15),!

Oil!Ru b b e d !Bronze!( US10B),!and!any!custom!finishing

Size:7(Diameter)!44!x!(Height)!2 5mm!!(1!inch!h eig ht)

Packaging:71!pc!+!Fastener/polybag

Installatio n 7Instructio n :7

1.! Open!the!door!to!the!point!where!you!want!it!to!stop.!Ensure!the!doorknob!is!approximately!2!inches!

from!the!wall.!!!

2.! Draw!a!line!where!the!door!opens!to!before!the!wall.!

3.! Find!a!spot!where!you’d!like!to!install!the!door!bumper!on!the!floor.!

4.! Make!a!pencil!mark!1/2!inch !a way!door!mark!line,!in!the!direction !o f!th e !d o o r's!s wing!whe n !o p e n ing .!

5.! Secure!the!do o r sto p !on!the!floor,!with!the!ru b ber!pad!facing!toward!the!door.!

This manual is also suitable for