Accent Builders Hardware DS-2001CP Installation guide

Type
Installation guide

This manual is also suitable for

DS#2001!
Description:!Half!Dome!Floor!Type!Bumper
Material:!Zinc!Alloy!and!Rubber
Finishings7Available:!Bright!Brass!(US3),!Bright!Chrome!(US26),!
Antique!Brass!(US5),!Satin!Chrome!(US26D),!Satin!Nickel!(US15),!
Oil!Ru b b e d !Bronze!( US10B),!and!any!custom!finishing
Size:7(Diameter)!44!x!(Height)!2 5mm!!(1!inch!h eig ht)
Packaging:71!pc!+!Fastener/polybag
Installatio n 7Instructio n :7
1.! Open!the!door!to!the!point!where!you!want!it!to!stop.!Ensure!the!doorknob!is!approximately!2!inches!
from!the!wall.!!!
2.! Draw!a!line!where!the!door!opens!to!before!the!wall.!
3.! Find!a!spot!where!you’d!like!to!install!the!door!bumper!on!the!floor.!
4.! Make!a!pencil!mark!1/2!inch !a way!door!mark!line,!in!the!direction !o f!th e !d o o r's!s wing!whe n !o p e n ing .!
5.! Secure!the!do o r sto p !on!the!floor,!with!the!ru b ber!pad!facing!toward!the!door.!
!
!
!
!
  • Page 1 1

Accent Builders Hardware DS-2001CP Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI