Label Picture Description QTY
A
Left Armrest
(with Legs)
1
B
Right Armrest
(with Legs)
1
C
Backrest
(with Legs)
3
D Seat Panel 3
E
Front Panel
(with Legs)
3
Caution : You must read this before you proceed
3 Seater
Noble House Home Furnishings LLC
Page 1 OF 11
F Left Front Foot Clip 1
G Right Front Foot Clip 1
H Left Back Foot Clip 1
I Right Back Foot Clip 1
J Front Middle Foot Clip 2
K Back Middle Foot Clip 2
L
Inner Panel
(with Legs)
2
M Seat Cushion 3
Q Rubber Hammer 1
Before
Beginning
Assembly:
Noble House Home Furnishings LLC
Page 2 OF 11
Step 1
Open the carton and place all parts on a clean, non-marring surface.
Place the two Front Panels(E) facedown on the clean, non-marring surface.
Insert the Clasps of the Front Panel(E) into the large part of Pear-shaped Clasp mounting positions of the
other Front Panel(E) as shown above.
Button up the Clasps with the Rubber Hammer(Q) as pictured.
Overview
This 3 Seater has multiple parts and may require up to 60 minutes to assemble. To give you an overview of
the 3 Seater parts, the above picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and steps before assembly.
Left Armrest (A)
Seat Cushion (M)
Backrest (C)
Front Panel (E)
Front Facing
Right Armrest (B)
Seat Panel (D)
Right Front Foot Clip (G)
Left Front Foot Clip (F)
Left Back Foot Clip (H)
Front Middle Foot Clip (J)
Clasp
Pear-shaped Clasp
Mounting Position
Noble House Home Furnishings LLC
Page 3 OF 11
Step 2
Insert the Clasps of the Front Panel(E) into the large part of Pear-shaped Clasp mounting positions of the
other Front Panel(E) as shown above.
Button up the Clasps with the Rubber Hammer(Q) as pictured.
Step 3
Align Inner Panel(L) to Middle Panel(E) as pictured above.
Insert the Dowel of the Inner Panel into the mounting position of the Middle Panel until it clicks into place.
Repeat this process with the remaining Inner Panel(L).
Dowel
Pear-shaped Clasp
Mounting Position
Clasp
Noble House Home Furnishings LLC
Page 4 OF 11
Step 4
Place the Seat Panels(D) facedown on the clean, non-marring surface.
Insert the Clasps of the Seat Panel(D) into the large part of Pear-shaped Clasp mounting positions of the
other Seat Panel(D) and push down to button up the Clasps with the Rubber Hammer(Q).
Step 5
Insert the Clasps of the Seat Panel(D) into the large part of Pear-shaped Clasp mounting positions of the
other Seat Panel(D) and push down to button up the Clasps with the Rubber Hammer(Q).
Another side of Seat Board (D)
Noble House Home Furnishings LLC
Page 5 OF 11
Step 7
Place the Backrests(C) on the clean, non-marring surface.
Insert the Clasps of the Backrest(C) into the large part of the Pear-shaped Clasp mounting positions on the
other Backrest(C).
Button up the Clasps with the Rubber Hammer(Q) as pictured.
Step 6
With help from an adult partner, insert Front Panels(E) and Inner Panels(L) into Seat Panels(D) using the
interlocking joints with Rubber Hammer(Q).
Noble House Home Furnishings LLC
Page 6 OF 11
Step 8
Insert the Clasps of the Backrest(C) into the large part of the Pear-shaped Clasp mounting positions on the
other Backrest(C).
Button up the Clasps with the Rubber Hammer(Q) as pictured.
Step 9
With help from an adult partner, place the Backrests(C) on the Seat Panels(D) and Inner Panels(L) as
shown above.
Insert the Clasps of the Seat Panels(D) and Inner Panels(L) into the large part of Pear-shaped Clasp
Mounting Positions of the Backrests(C).
Noble House Home Furnishings LLC
Page 7 OF 11
Step 10
With the help of your adult partner, stand the assembly upright.
Button up the Clasps with the Rubber Hammer(Q) left to right as pictured.
Step 11
Align the Left Armrest(A) to the left side of Backrest(C), Seat Panel(D), and Front Panel(E).
Insert the Clasps on the Left Armrest(A) into the Pear-shaped Clasp mounting positions on the Front
Panel(E), Seat Panel(D), and Backrest(C).
Insert the 8 Clasps of Front Panel(E), Seat Panel(D), and Backrest(C) into Pear-Shaped Clasp mounting
positions of Left Armrest(A).
Button up the Clasps with the Rubber Hammer(Q) from left to right as shown above.
Noble House Home Furnishings LLC
Page 8 OF 11
Step 12
Repeat the process from Step 10, to assemble the Right Armrest(B)
Step 13
Attach the Left Front Foot Clip(F), Right Front Foot Clip(G), Left Back Foot Clip(H), Right Back Foot Clip(I),
Front Middle Foot Clips(J), and Back Middle Foot Clips(K) to the feet of the 3 Seater using the Rubber
Hammer(Q) as shown above.
Noble House Home Furnishings LLC
Page 9 OF 11
Step 14
With the help of your adult partner, stand the 3 Seater up on a Lever surface, to check for wobbles.
If there are wobbles, use the Rubber Hammer(Q) to ensure all parts are properly secured.
Step 15
Place the Cushion(M) on the seat.
Your 3 Seater is ready for use.
This 3 Seater can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Page 10 OF 11
Questions & Answers about Proposition 65
• What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to
chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the
products that Californians purchase, in their homes or workplaces, or that are released into the
environment. By requiring that this information be provided, Proposition 65 enables Californians to make
informed decisions about their exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed
chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or
other reproductive harm. This list, which must be updated at least once a year, has grown to include
approximately 900 chemicals since it was first published in 1987.
• What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include additives or
ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals
may also be used in manufacturing and construction, or they may be byproducts of chemical processes,
such as motor vehicle exhaust.
• What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a business, or in rental
housing, the business issuing the warning is aware or believes that it is exposing individuals to one or more
listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough to pose no
significant risk of cancer or is significantly below levels observed to cause birth defects or other
reproductive harm.
• Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65, you can contact
OEHHA's Proposition 65 program at [email protected], or by phone at (916) 445-6900.
Noble House Home Furnishings LLC
Page 11 OF 11
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Noble House 54101 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Noble House 23434 Operating instructions
-
Noble House 305902 Operating instructions
-
Noble House 23436 Operating instructions
-
Noble House 305902 Operating instructions
-
Noble House 14397 Operating instructions
-
Noble House 305752 User guide
-
Noble House 54106 Operating instructions
-
Noble House 40975 User manual
-
Noble House 305893 Installation guide
-
Noble House 94287 User guide
