1 Shot 1S-MC Operating instructions

Brand: 1 Shot

Model: 1S-MC

Type: Operating instructions

1S-MC Direct to Metal Paint: Use and Care Instructions:

Engineered to form an extremely strong bond to all metal surfaces, including

galvanized metal, previously painted metal, iron, steel and various metal substrates.

Surface Preparation: Clean and dry all intended surfaces before using. For best

performance, ensure that surfaces are free of rust, dirt, dust, oils, wax, mold,

mildew, and loose or flaking paint. Mineral spirits or acetone can be used to rid

the surface of residue. Lightly sand the surface with steel wool to remove loose

or flaking paint.

Applying DTM: DO NOT THIN. Stir product before and during use. Apply with a

synthetic brush, 1/4” - 3/8” nap roller, or an airless sprayer. For proper adhesion,

apply product at air and surface temperatures between 50-90° F (10-32° C) and,

for exterior surfaces, when precipitation is not forecast for 24 hours. If applying

one color from multiple containers, mix all containers together and stir well to

ensure a uniform appearance.

Dry time: Allow up to 4 hours for product to dry to the touch. Longer dry times

may result if product is applied in cold or humid conditions. Allow at least 2

weeks before washing surface with any sort of detergent or pressurized washer.

Cleanup: Rinse all brushes, rollers, and sprayer tips with warm water and a

mild detergent. Properly dispose of soiled rags, and store product away from

freezing temperatures and direct sunlight. Dispose of excess product at a proper

disposal facility. Please do not dump in drains that lead to streams or natural

water sources.

WARNING! IRRITANT! HARMFUL IF SWALLOWED. MAY CAUSE EYE,

NOSE, AND THROAT IRRITATION. AVOID CONTACT WITH SKIN AND EYES

AND AVOID BREATHING OF VAPORS AND SPRAY MIST. MUST WEAR EYE

PROTECTION AND PROTECTIVE CLOTHING.

USE ONLY OUTDOORS OR IN A WELL-VENTILATED AREA.

To avoid overexposure, open windows and doors or use other means to ensure

fresh air entry during application. If you experience eye watering, headaches, or

dizziness, increase fresh air, wear respiratory protection (NIOSH approved for

organic vapor; obtain professional advice before using), or leave the area. Avoid

contact with eyes and skin. Wash thoroughly after handling. Keep container tightly

closed. Do not expose to temperatures exceeding 50 °C/122 °F.

FIRST AID: IF EXPERIENCING RESPIRATORY SYMPTOMS: Remove person to fresh

air and keep comfortable for breathing. If respiratory symptoms persist get medical

attention. IF IN EYES: Flush immediately with plenty of water for at least 20 minutes

and get medical attention. Remove contact lenses if present and easy to do – continue

flushing. IF ON SKIN: Wash with plenty of soap and water. If skin irritation or a

rash occurs, get medical attention. IF SWALLOWED: Do NOT induce vomiting. Get

immediate medical attention. Poison Control Center: 1-800-222-1222

1 Shot 1S-MC Operating instructions

Brand: 1 Shot

Model: 1S-MC

Type: Operating instructions

Download PDF

report

1 Shot 1S-MC Operating instructions

1 Shot 1S-MC Operating instructions

Related papers

Other documents