2. DUROFLEX
  3. D3D40N

DUROFLEX D3D40N, D3D30R, D3D30R250, D3D40R250, D3DR40 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the DUROFLEX D3D40N Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instructions - Assembly Duroflex 3D
Steps to install Duroflex 3D in chimneys:
1. Ensure application area is clean and dry.
2. Place Duroflex 3D into position and form it to basic shape of roof.
3. Remove the protective film and firmly fix top butyl adhesive into
place.
4. Repeat operation in both sides of the chimney.
5. Mold to the chimney using a rubber hammer.
6. Place tiles over Duroflex 3D to create a watertight seal against the
roof.
7. Mold to the chimney using a rubber hammer.
8. Screw the aluminum profiles and seal.
/