DURO FLEX D3D40N Operating instructions

Brand: DURO FLEX

Model: D3D40N

Type: Operating instructions

This manual is also suitable for

Instructions - Assembly Duroflex 3D

Steps to install Duroflex 3D in chimneys:

1. Ensure application area is clean and dry.

2. Place Duroflex 3D into position and form it to basic shape of roof.



3. Remove the protective film and firmly fix top butyl adhesive into

place.



4. Repeat operation in both sides of the chimney.

5. Mold to the chimney using a rubber hammer.



6. Place tiles over Duroflex 3D to create a watertight seal against the

roof.

7. Mold to the chimney using a rubber hammer.





8. Screw the aluminum profiles and seal.

1
2
3
4
5

DURO FLEX D3D40N Operating instructions

Brand: DURO FLEX

Model: D3D40N

Type: Operating instructions

This manual is also suitable for

Other documents