Speakman SGN1 Installation guide

Type
Installation guide

This manual is also suitable for

For Vertical Pipe mounted sign, pull plastic tie
corresponding holes in the safety sign as shown
below.
1
2
Then, assemble plastic tie and sign to vertical
pipe on a SPEAKMAN Safety Product.
Instructions for Signs:
P: 800-537-2107 | WWW.SPEAKMANCOMPANY.COM
P: 800-537-2107 | WWW.SPEAKMANCOMPANY.COM
P: 800-537-2107 | WWW.SPEAKMANCOMPANY.COM
Items needed for install:
Safety Sign
Green
Plastic
Tie
Vertical Pipe
on SPEAKMAN
Safety Product
For replacement parts call:
92-3486-R2
For Wall Mounted Signs, place sign in a clearly visible area
in close proximity to the safety product. Secure to the wall with
screws (not included).
P: 800-537-2107 | WWW.SPEAKMANCOMPANY.COM
P: 800-537-2107 | WWW.SPEAKMANCOMPANY.COM
P: 800-537-2107 | WWW.SPEAKMANCOMPANY.COM
Phillips
Screwdriver
Mounting Screws
(not included)
www.speakman.com
  • Page 1 1

Speakman SGN1 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI