Eagle Tool US ETD75072 Dimensions Guide

Type
Dimensions Guide
EAGLE TOOL US
4014 NW HWY, Crystal Lake, IL 60014 www.eagle-tool.us P - 815-459-4177 F - 815-459-4178
DIRT AUGER
SYSTEM
DIRT AUGERDIRT AUGER
SYSTEMSYSTEM
There are two ways commonly being used to auger under
sidewalks and driveways for installation of wires and plumbing.
The rst involves auguring under the concrete using a water
jet which creates a large void under the concrete adding to the
possibility of cracking and making a very soggy work area. The
second involves a hammering action either using an expensive
hydraulic tool or a manual ramming tool, both of which can only
be used by digging a very long ditch perpendicular to the walk.
Our new dirt auger system requires only a minimal starting and
ending hole on either side of the structure. Due to its exible
spring steel shank this bit can be curved and aimed in the
direction needed and drills only a large enough hole to pull wire
or pipe back through. No need for a costly hydraulic system or a
sledge hammer, a standard power drill does all the work.
Tested in the eld by a 15 year veteran of the cable
installation trade.
This bit has interchangeable shank lengths and can be extended
using standard ex bit extensions.
Usage:
USE FOR AUGERING AND
INSTALLING WIRE OR PIPE UNDER
SIDEWALKS AND DRIVEWAYS
PATENT PENDING
Fish hole for
easy retrieval
of wire
Long taper for
easy retrieval
Custom heat
treated spring
steel shank for
optimum memory
Custom heat
treated drill bit
designed for
organic material
Interchangeable
lengths
MADE IN USA
Item #: ETD750
Product Description: Dirt Auger
3/4” X 1/4” Shank Diameter
Includes: Dirt Auger Head Only
Cable Installation
Landscape Lighting
Sprinkling Systems
Landscape Feeding Stakes
TOUGH
ON ANY JOB SITE
  • Page 1 1

Eagle Tool US ETD75072 Dimensions Guide

Type
Dimensions Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI