idh by St. Simons 13100-3NL Installation guide

by St. Simons, Inc.

Quality Solid Brass Decorative Hardware & Bath Accessories

“The Special Finishes Specialist”



idhbrass.com

Installation Instructions

Premium Grade Solid Brass

4-1/2” Projection Square Kickdown Stop

Item# 13100

Dimensions:

• Arm Length: 4-1/2”

• Overall Projection: 4-3/4”

• Weight: 9 oz.

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Engage the kickstop so that the rubber tip would be flat

on the floor and the base would be flat on the door.

2. Position stop near outer edge of door with rubber foot

flat on floor.

3. Mark and drill pilot holes.

4. Secure the door stop into the wall using a screw driver.

Catalog Section: D

4-1/2” Projection Square Kickdown Stop

Item# 13100

Date: Rev 02/18

This manual is also suitable for

Download PDF