10839X

DANCO 10839X, 10839 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the DANCO 10839X Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Insert into pipe. Rotate nut clockwise
until PlugAll does not easily slip inside
pipe. Rotate nut a maximum of 2 full
turns. Then, check for leaks.
Insert into pipe. Rotate nut clockwise until
it has become hand tight. Then, check
for leaks.
Nut
Compression Disk
Rubber Gasket
Threaded Stem
2" PIPE
1 ½" &
2” CLEANOUT
1 ½" PIPE
WARNING: Hand tighten only. Do not overtighten.
CAUTION: Stand clear when pressure testing.
AVERTISSEMENT: Serrez à la main uniquement. Ne serrez pas trop.
ATTENTION: Écartez-vous pendant les tests de pression.
10839C
2727 Chemsearch Boulevard Irving, Texas 75062
©2018 Danco, Inc. All rights reserved.
/