Liebherr EGN 9171 User guide

EGN 9171
Liebherr
Brand
Liebherr
Model
EGN 9171
Category
Kitchen & houseware accessories
Type
User guide

This manual is also suitable for

Design Planning Guide
2
The Monolith stands for a new generation of
fully integrated refrigerators, freezers, and wine
cabinets. It is based on over 60 years of
innovation and German engineering, setting
new standards for food and wine storage.
Luxury features, impressive dimensions, modern
components for maximum energy efficiency
and innovative technologies such as
PowerCooling and BioFresh for storing food
and keeping it fresh for significantly longer are
what make Monolith appliances so unique.
Monolith columns can be combined in a
variety of ways according to individual
requirements and preferences.
Monolith: A whole new dimension of
refrigerating and freezing.
3
4
213.4
213.4
213.4
213.4
45.7
61.0
76.2
91.4
213.4
213.4
45.7
61.0
Wine
* stainless steel front
* stainless steel front
customer spec. door front
customer spec. door front
EWT 9175
EWT 9275
Model overview
Model Features
Fridge
Freezer
Door hinges ¹
on delivery
Front ²
(*optional accessories)
* stainless steel front
* stainless steel front
* stainless steel front
* stainless steel front
customer spec. door front
customer spec. door front
customer spec. door front
customer spec. door front
EKB 9471
EKB 9671
EGN 9171
EGN 9271
¹ Door hinge exchange set on page 25 required for reversing hinges. Reversals to be performed by a Liebherr Authorised Dealer.
² Door front dimensions and weights on pages 24 & 27.
5
137.1
152.4
121.9
137.1
The Monolith series offers a range of options for your new dream kitchen, as a stand-alone unit or as a combination
comprising two or more appliances. This creates numerous options for optimal food storage.
The Side-by-Side kit on page 25 is required if there is less than 102 mm spacing between appliances.
Please refer to page 29 for detailed information about the cut-out niche dimensions ³.
Side-by-Side combination
EGN 9171
Freezer
EKB 9471
Fridge
EGN 9171
Freezer
EKB 9671
Fridge
EGN 9271
Freezer
EKB 9471
Fridge
EGN 9271
Freezer
EKB 9671
Fridge
Examples of possible combinations with two or three appliances
152.4
EGN 9271
Freezer
EWT 9175
Wine
Cabinet
EKB 9671
Fridge
EGN 9171
Freezer
EWT 9275
Wine
Cabinet
EKB 9471
Fridge
EGN 9171
Freezer
EWT 9175
Wine
Cabinet
EKB 9471
Fridge
EGN 9271
Freezer
EWT 9275
Wine
Cabinet
EKB 9471
Fridge
198.1
EGN 9171
Freezer
EWT 9175
Wine
Cabinet
EKB 9671
Fridge
182.8167, 6
182.8
198.1
³ The indicated cut-out niche dimensions are in accordance to alignment of the toe-kick.
EKB 9471
6
7
REFRIGERATION
76.2
8
76.2cm Monolith refrigerator
EKB 9471
* Noise output - according to EN 60704-3.
** BioFresh bins, 0°C. BioFresh-Plus bins, -2°C or 0°C.
*** Please contact your Liebherr Authorised Dealer for door reversal.
39
430
188
4 / 3
3
2 / 1
InfinitySwipe
+2°C to +7°C
Automatic
InfinityLight
InfinitySpring
Yes
Right, reversible ***
212.6 / 75.4 / 61
213.4 / 76.2 / min. 63.5
193 / 178
220-240 / 1.5 / 50
Sound rating dB(A) *
Total net capacity of fridge in litres
of which BioFresh net capacity in litres
Number of storage shelves, of which height-adjustable
Number of door racks
Number of BioFresh / BioFresh-Plus safes with LED lighting
Electronic control
Refrigerator temperature range °C **
Defrosting method
Interior lighting
Integrated water dispenser / Fixed water connection 20 mm (3/4”)
Water filter
Door hinge
Product Dimensions
in cm (H / W / D)
Cut Out Dimensions
in cm (H / W / D)
Gross / Net weight in kg
Voltage V / Connected load A / Frequency Hz
Optional accessories
· Flat brushed aluminium handle
· Square brushed aluminium handle
· Round stainless steel handle
· Stainless steel front
· Toe kick made of stainless steel
· Side-by-Side kit
· Door hinge exchange set
Optional accessories on pages 24–25.
102 mm
457 mm
A
B
72 - 106 mm
76 mm
76 mm
76 mm
76 mm
D D
2134 mm
102 mm
72 - 106 mm
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
CC
E E
E
E
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm2134 mm
762 mm
457 mm
A
B
76 mm76 mm
D D
C
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
C
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
E
E
E
E
~1850
~2400
~2250
~1700
B
H
9
W
Product Dimensions
Cut Out Dimensions
Internal door panel
A = 337mm
B = 12.5mm
C = 810mm
External door panel
A = 343mm
B = 12.5mm
C = 822mm
DimensionA = without
fitted door handle
A
Unit depth
with external door panel installation: 635 mm
with internal door panel installation: 635 mm + thickness
of custom panel.
B
Point at which the mains cable exits from the rear of the
appliance (19 mm from the left and 127 mm from the
floor). The free length of the mains cable is 2.5 m.
C
The appliance has a recess in this area for cable and
water line routing: Depth is 25 mm, and height 140mm
across the entire appliance width.
D
This surface is visible when the appliance door is opened.
Designed finish is therefore recommended.
E
The anti-tipping device positioned at the base of the
appliance must be secured to the floor or to the wall.
Integrated installation
H = 2029mm
W = 756mm
Frameless installation
H = 2032mm
(plus the dimensions of overlapping of the panel on the top)
W = 762mm
(plus the dimensions of overlapping of the panel on both sides)
Thickness of the front: min. 16 mm* / max. 30 mm
Weight of front and handle: max. 35 kg
Installations behind the appliance are not possible.
C
Door Front Dimensions
and dimensions of free length for power / water
Individual toe kick Continuous toe kick
IMPORTANT!
Stated minimum height dimensions
include height of the adjustable feet
when fully inserted.
Height can be increased by a
maximum of 26 mm by turning the
adjustable feet. When the appliance is
fitted in the recess, the appliance must
be raised by turning the adjustable feet
so that the appliance top has contact
with the anti-tipping bracket. This results
in a 102 mm toe kick height.
* If a five-piece shaker style front is used, which is thinner than the minimum front thickness, shorter screws than those supplied in the accessory pack must be used.
For further relevant planning and safety requirements see pages 26–33.
Note: Cut-out niche dimension is in accordance to alignment of the toe-kick.
91.4
10
91.4cm Monolith refrigerator
EKB 9671
* Noise output - according to EN 60704-3.
** BioFresh bins, 0°C. BioFresh-Plus bins, -2°C or 0°C.
*** Please contact your Liebherr Authorised Dealer for door reversal.
39
534
235
4 / 3
3
2 / 1
InfinitySwipe
+2°C to +7°C
Automatic
InfinityLight
InfinitySpring
Yes
Right, reversible ***
212.6 / 90.9 / 61
213.4 / 91.4 / 63.5
215 / 198
220-240 / 1.5 / 50
Sound rating dB(A) *
Total net capacity of fridge in litres
of which BioFresh net capacity in litres
Number of storage shelves, of which height-adjustable
Number of door racks
Number of BioFresh / BioFresh-Plus safes with LED lighting
Electronic control
Refrigerator temperature range °C **
Defrosting method
Interior lighting
Integrated water dispenser / Fixed water connection 20 mm (3/4”)
Water filter
Door hinge
Product Dimensions
in cm (H / W / D)
Cut Out Dimensions
in cm (H / W / D)
Gross / Net weight in kg
Voltage V / Connected load A / Frequency Hz
Optional accessories
· Flat brushed aluminium handle
· Square brushed aluminium handle
· Round stainless steel handle
· Stainless steel front
· Toe kick made of stainless steel
· Side-by-Side kit
· Door hinge exchange set
Optional accessories on pages 24–25.
457 mm
A
B
76 mm76 mm
D D
C
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
C
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
E
E
E
E
102 mm
457 mm
A
B
72 - 106 mm
76 mm
76 mm
76 mm
76 mm
D D
2134 mm
102 mm
72 - 106 mm
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
C
C
E E E
E
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm
2134 mm
914 mm
~1775
~2400
~2175
~1550
B
H
11
W
Product Dimensions
Internal door panel
A = 400mm
B = 12.5mm
C = 962mm
External door panel
A = 406mm
B = 12.5mm
C = 975mm
DimensionA = without
fitted door handle
Cut Out Dimensions
Integrated installation
H = 2029mm
W = 908mm
Frameless installation
H = 2032mm
(plus the dimensions of overlapping of the panel on the top)
W = 914mm
(plus the dimensions of overlapping of the panel on both sides)
Thickness of the front: min. 16 mm* / max. 30 mm
Weight of front and handle: max. 40 kg
Installations behind the appliance are not possible.
IMPORTANT!
Stated minimum height dimensions
include height of the adjustable feet
when fully inserted.
Height can be increased by a
maximum of 26 mm by turning the
adjustable feet. When the appliance is
fitted in the recess, the appliance must
be raised by turning the adjustable feet
so that the appliance top has contact
with the anti-tipping bracket. This results
in a 102 mm toe kick height.
* If a five-piece shaker style front is used, which is thinner than the minimum front thickness, shorter screws than those supplied in the accessory pack must be used.
For further relevant planning and safety requirements see pages 26–33.
A
Unit depth
with external door panel installation: 635 mm
with internal door panel installation: 635 mm + thickness
of custom panel.
B
Point at which the mains cable exits from the rear of the
appliance (19 mm from the left and 127 mm from the
floor). The free length of the mains cable is 2.5 m.
C
The appliance has a recess in this area for cable and
water line routing: Depth is 25 mm, and height 140mm
across the entire appliance width.
D
This surface is visible when the appliance door is opened.
Designed finish is therefore recommended.
E
The anti-tipping device positioned at the base of the
appliance must be secured to the floor or to the wall.
C
Individual toe kick Continuous toe kick
Note: Cut-out niche dimension is in accordance to alignment of the toe-kick.
Door Front Dimensions
and dimensions of free length for power / water
EGN 9171
12
13
FREEZING
45.7
14
Sound rating dB(A) *
Net capacity of freezer in litres
Number of storage shelves, of which height-adjustable
Number of door racks
Number of FrostSafe drawers
Electronic control
Temperature range of freezer °C
Defrosting method
Interior lighting
IceMaker
Water filter
Ice cube production in 24h / kg
Ice cube storage capacity in kg
Storage time in event of a fault in hours
Freezing capacity in 24h / kg
Door hinge
Product Dimensions
in cm (H / W / D)
Cut Out Dimensions
in cm (H / W / D)
Gross / Net weight in kg
Voltage V / Connected load A / Frequency Hz
45.7cm Monolith freezer
EGN 9171
39
218
4 / 3
3
3
InfinitySwipe
-14°C to -27°C
Automatic
InfinityLight
Fixed water connection 20 mm (3/4”)
Yes
1.6
1.8
14
12
Left, reversible **
212.6 / 45 / 61
213.4 / 45.7 / min. 63.5
152 / 137
220-240 / 2.0 / 50
* Noise output - according to EN 60704-3.
** Please contact your Liebherr Authorised Dealer for door reversal.
Optional accessories
· Flat brushed aluminium handle
· Square brushed aluminium handle
· Round stainless steel handle
· Stainless steel front
· Toe kick made of stainless steel
· Side-by-Side kit
· Door hinge exchange set
Optional accessories on pages 24–25.
102 mm
457 mm
A
B
72 - 106 mm
76 mm
76 mm
76 mm
76 mm
D D
2134 mm
102 mm
72 - 106 mm
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
C
C
E
E E E
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm2134 mm
457 mm
457 mm
A
B
76 mm
76 mm
D D
C
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
C
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
E
E
E E
~2000
~2400
~2400
~2000
B
H
15
W
Product Dimensions
Cut Out Dimensions
Internal door panel
A = 210mm
B = 12.5mm
C = 505mm
External door panel
A = 216mm
B = 12.5mm
C = 517mm
DimensionA = without
fitted door handle
Integrated installation
H = 2029mm
W = 451mm
Frameless installation
H = 2032mm
(plus the dimensions of overlapping of the panel on the top)
W = 457mm
(plus the dimensions of overlapping of the panel on both sides)
Thickness of the front: min. 16 mm* / max. 30 mm
Weight of front and handle: max. 25 kg
Installations behind the appliance are not possible.
IMPORTANT!
Stated minimum height dimensions
include height of the adjustable feet
when fully inserted.
Height can be increased by a
maximum of 26 mm by turning the
adjustable feet. When the appliance is
fitted in the recess, the appliance must
be raised by turning the adjustable feet
so that the appliance top has contact
with the anti-tipping bracket. This results
in a 102 mm toe kick height.
* If a five-piece shaker style front is used, which is thinner than the minimum front thickness, shorter screws than those supplied in the accessory pack must be used.
For further relevant planning and safety requirements see pages 26–33.
A
Unit depth
with external door panel installation: 635 mm
with internal door panel installation: 635 mm + thickness
of custom panel.
B
Point at which the mains cable exits from the rear of the
appliance (19 mm from the left and 127 mm from the
floor). The free length of the mains cable is 2.5 m.
C
The appliance has a recess in this area for cable and
water line routing: Depth is 25 mm, and height 140mm
across the entire appliance width.
D
This surface is visible when the appliance door is opened.
Designed finish is therefore recommended.
E
The anti-tipping device positioned at the base of the
appliance must be secured to the floor or to the wall.
C
Individual toe kick Continuous toe kick
Note: Cut-out niche dimension is in accordance to alignment of the toe-kick.
Door Front Dimensions
and dimensions of free length for power / water
61.0
16
EGN 9271
39
322
4 / 3
3
3
InfinitySwipe
-14°C to -27°C
Automatic
InfinityLight
Fixed water connection 20 mm (3/4”)
Yes
1.6
2.4
19
12
Left, reversible **
212.6 / 60.2 / 61
213.4 / 61 / min. 63.5
170 / 157
220-240 / 2.0 / 50
* Noise output - according to EN 60704-3.
** Please contact your Liebherr Authorised Dealer for door reversal.
61.0cm Monolithfreezer
Sound rating dB(A) *
Net capacity of freezer in litres
Number of storage shelves, of which height-adjustable
Number of door racks
Number of FrostSafe drawers
Electronic control
Temperature range of freezer °C
Defrosting method
Interior lighting
IceMaker
Water filter
Ice cube production in 24h / kg
Ice cube storage capacity in kg
Storage time in event of a fault in hours
Freezing capacity in 24h / kg
Door hinge
Product Dimensions
in cm (H / W / D)
Cut Out Dimensions
in cm (H / W / D)
Gross / Net weight in kg
Voltage V / Connected load A / Frequency Hz
Optional accessories
· Flat brushed aluminium handle
· Square brushed aluminium handle
· Round stainless steel handle
· Stainless steel front
· Toe kick made of stainless steel
· Side-by-Side kit
· Door hinge exchange set
Optional accessories on pages 24–25.
102 mm
457 mm
A
B
72 - 106 mm
76 mm
76 mm
76 mm
76 mm
D D
2134 mm
102 mm
72 - 106 mm
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
CC
E
E
E E
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm
76 mm
76 mm
102 mm
72 - 106 mm
2134 mm
2134 mm
610 mm
457 mm
A
B
76 mm76 mm
D D
C
610 mm
A
B
D D
C
762 mm
A
B
D D
C
914 mm
A
B
D D
C
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
76 mm76 mm
2134 mm
E
E
E E
~1925
~2400
~2325
~1850
B
H
17
W
Product Dimensions
Cut Out Dimensions
Internal door panel
A = 273mm
B = 12.5mm
C = 658mm
External door panel
A = 279mm
B = 12.5mm
C = 670mm
DimensionA = without
fitted door handle
Integrated installation
H = 2029mm
W = 603mm
Frameless installation
H = 2032mm
(plus the dimensions of overlapping of the panel on the top)
W = 610mm
(plus the dimensions of overlapping of the panel on both sides)
Thickness of the front: min. 16 mm* / max. 30 mm
Weight of front and handle: max. 30 kg
Installations behind the appliance are not possible.
IMPORTANT!
Stated minimum height dimensions
include height of the adjustable feet
when fully inserted.
Height can be increased by a
maximum of 26 mm by turning the
adjustable feet. When the appliance is
fitted in the recess, the appliance must
be raised by turning the adjustable feet
so that the appliance top has contact
with the anti-tipping bracket. This results
in a 102 mm toe kick height.
* If a five-piece shaker style front is used, which is thinner than the minimum front thickness, shorter screws than those supplied in the accessory pack must be used.
For further relevant planning and safety requirements see pages 26–33.
A
Unit depth
with external door panel installation: 635 mm
with internal door panel installation: 635 mm + thickness
of custom panel.
B
Point at which the mains cable exits from the rear of the
appliance (19 mm from the left and 127 mm from the
floor). The free length of the mains cable is 2.5 m.
C
The appliance has a recess in this area for cable and
water line routing: Depth is 25 mm, and height 140mm
across the entire appliance width.
D
This surface is visible when the appliance door is opened.
Designed finish is therefore recommended.
E
The anti-tipping device positioned at the base of the
appliance must be secured to the floor or to the wall.
C
Individual toe kick Continuous toe kick
Note: Cut-out niche dimension is in accordance to alignment of the toe-kick.
Door Front Dimensions
and dimensions of free length for power / water
EWT 9275
18
19
WINE
20
45.7
EWT 9175
45.7cm Monolith wine
42
232
75
9
9
Yes
Aluminium & beech
InfinitySwipe
+5°C to +20°C
2
Visual and audible
InfinityLight
Audible
Yes
Yes
Insulated glass door
Right or left, reversible **
212.6 / 45 / 61
213.4 / 45.7 / min. 63.5
148 / 133
220-240 / 1.5 / 50
Sound rating dB(A) *
Net capacity in litres
Max. No. of Bordeaux bottles (0.75 litre)
Number of storage shelves
Running on telescopic rails
InfinityBoard
Shelf material
Electronic control
Temperature range °C
Temperature zones
Temperature alarm
Interior lighting
Door alarm
Safety thermostat
FreshAir activated charcoal filter
Door type
Door hinge
Product Dimensions
in cm (H / W / D)
Cut Out Dimensions
in cm (H / W / D)
Gross / Net weight in kg
Voltage V / Connected load A / Frequency Hz
* Noise output - according to EN 60704-3.
** Please contact your Liebherr Authorised Dealer for door reversal.
Optional accessories
· Flat brushed aluminium handle
· Square brushed aluminium handle
· Round stainless steel handle
· Stainless steel front
· Toe kick made of stainless steel
· Side-by-Side kit
· Door hinge exchange set
Optional accessories on pages 24–25.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Liebherr EGN 9171 User guide

EGN 9171
Liebherr
Brand
Liebherr
Model
EGN 9171
Category
Kitchen & houseware accessories
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents