XO XOU24BCGOA is a high-quality, innovative, and stylish undercounter beverage center designed for storing and chilling a variety of beverages, including wine, beer, and soda. With its flexible temperature control, you can set the ideal temperature for your drinks, ensuring they are always perfectly chilled and ready to enjoy. The unit's sleek design and compact size make it a great fit for any kitchen, bar, or entertainment area.
XO XOU24BCGOA is a high-quality, innovative, and stylish undercounter beverage center designed for storing and chilling a variety of beverages, including wine, beer, and soda. With its flexible temperature control, you can set the ideal temperature for your drinks, ensuring they are always perfectly chilled and ready to enjoy. The unit's sleek design and compact size make it a great fit for any kitchen, bar, or entertainment area.
I worked really hard
on this manual -
so please read it.
XOU24BCGOA
ALL PURPOSE BEVERAGE CENTER
2
UNDERCOUNTER
When buying any XO appliance
you can be confident you have chosen a
high quality, innovative and stylish product
from a company that cares about you!
If you require service or have questions,
Help is only a phone call away -
call: 973-403-8900
Talk to one of our undercounter experts.
CONGRATULATIONS
on purchasing your XO.
Before you proceed, take just
a moment to register your XO at:
Ensuring warranty coverage should you need service
Providing ownership verification for insurance purposes
Let’s XO notify you in the event of product changes or recalls.
www.xoappliance.com/register-your-product/
REGISTRATION HELPS YOU BY -
Before You Get Started
Safety Instructions
Electrical and Grounding Instructions
Care and Cleaning
Helpful Hints
Cleaning the Interior / Exterior
Changing the Carbon Air Purification Filter
FAQ’s
Before You Call For Service
Warranty
4 - 7
Installation Instructions
S
Reversing the Door Swing
Integrated Panel Dimensions
Optional Stainless Overlay Panel
Leveling Your XO
izes and Installation Dimensions
8 - 19
25 - 26
27 - 28
3
where things are
please read and follow
all safety instructions
It’s for your
own good...
Honest.
Installer Checklist
Find Your Model
Operating Instructions
Control System Overview
Setting the Temperature
Functions
Beverage Storage
20
- 24
Product Overview
4
the job isn’t done until
To ensure that the installation process is successfully completed,
here are few things to review...
Is the unit plugged in?
Are the controls on? (Panel will illuminate.)
Are the controls operating correctly?
Has the unit been properly leveled - both side to side and front to back -
with all 4 leveling feet securely making contact with the floor?
This is an OVERLAY unit - have the panels been securely attached and properly aligned?
Is the door sealing properly?
Is the handle secure?
Have you thoroughly inspected all surfaces for any imperfections?
Have you reviewed this manual with the customer and explained the unit’s operation and care?
Has the customer received copies of the literature and keys?
Have you properly disposed of all packing materials properly (recycle, please)?
Is the custo
mer satisfied?
O
O
O
O
O
O
O
O
O
O
O
O
After installation, does the door open sufficiently to fully extend the shelves?
O
RISK OF CHILD ENTRAPMENT!
An empty refrigerator is a very dangerous attraction to children.
Remove door gaskets, latches, lids, lock and/or doors from unused or discarded appliances,
or take other actions to guarantee them harmless.
Always dispose of old appliances in accordance with local laws and regulations.
5
XOU24BCGOA
BEVERAGE CENTER
2
this is the model
covered in this
book
record your serial number
here in case you need it later
ACCOMMODATES
EUROPEAN | ADA | AMERICAN STANDARD
CABINETRY
Please read through completely before using your XO Unit
To prevent damage to the door gasket, the door must be opened all the way before pulling racks out.
The appliance must be positioned so that the plug is accessible.
Empty your XO unit before attempting to move the appliance. Moving while loaded may damage or
distort the frame.
The compressor will get HOT during operation / touching it may cause injury.
During installation follow all safety tips provided in this manual / appropriate safety equipment such as
safety glasses and work gloves should be worn.
Two people should move or lift your XO unit to prevent injury or damage.
Remov
e all interior and exterior packing materials prior to installation and dispose of properly.
Never cover the bottle racks with foil or other material which will impede internal air circulation.
For maximum efficiency, keep the door tightly shut unless loading or unloading and never overload your
XO unit.
Before installing, allow your XO unit to sit upright for 2 hours at the install site. This will allow the cooling
system to stabilize after transportation. Failure to follow this step may cause problems.
Location
Your XO unit should be located away from direct sunlight and heat sources (stove, heaters, etc.) which may
increase electrical consumption. High or low ambient temperature may cause units to work improperly.
The floor must be strong enough to support your XO unit fully loaded.
Your XO unit must not be installed in areas of where water or e
xcessive moisture are present.
Your XO unit’s final installation must observe the correct minimum air clearances around and behind the
unit to ensure adequate ventilation. In addition, all ventilation openings must be kept clear and free of
obstructions, failure to do so will result in damage to the unit.
WARNING
NEVER use external heat sources to accelerate defrosting
NEVER permit unauthorized service or modifications to your XO unit
NEVER tamper with the sealed refrigerant system - this unit uses R600A Refrigerant which is flammable.
It should never be used in the vicinity of any flammable or explosive ignition sources.
ALWAYS FOLLOW THE ELECTRICAL SAFETY INSTRUCTIONS OUTLINED IN THIS MANUAL.
6
your safety matters
Never store perishable food products such as meat or cheese in your wine cooler.
Your XO unit must not be installed near
where flammable, corrosive or hazardous materials are present.
Failure To Follow All Electrical Safety Measures May Result in Serious Injury,
Fire Or Death
All electrical work should only be performed by an
experienced, licensed electrician.
All XO units MUST be grounded for safe operation and
come equipped with a
3 Prong molded cord/plug for that
purpose.
NEVER remove or disable the 3rd prong with an adapter.
NEVER use an extension cord to operate your XO unit.
Your XO unit is built to operate on 115V 60Hz and
should be plugged directly into a dedicated 15 amp
3 prong outlet. If you are uncertain as to the
voltage, amperage capacity or if the 3rd prong is
properly grounded - consult a licensed electrician.
To maximize the
depth of the installation recess -
your outlet should be mounted flush with the wall.
Your XO unit should not share the circuit with any other
electrical devices as this may cause overloading,
overheating, blown fuses or tripping circuit breakers.
In a worst case this can pose a fire hazard.
NEVER handle your XO unit in wet conditions as this
can pose a severe danger of electric shock.
Exercise care when moving your XO unit to avoid
damage to the electrical cord. If the electrical cord of
your XO unit becomes worn or damaged it must be
replaced immediately by a qualified technician.
NEVER unplug your unit by pulling on the cord.
Unplug by gripping the plug firmly and pull out
straight from the outlet.
INDOOR USE ONLY:
This model is intended for indoor/interior
applications only and is not to be used in
installations that are open/exposed to natural
elements.
This unit is designed to operate between 60 F and
90 F. Higher ambient temperatures may reduce
the unit’s ability to reach low temperatures and/or
reduce performance.
For best performance, keep the unit out of direct
sunlight and away from heat generating equipment.
In climates where high humidity and dew points are
present, condensation may appear on outside surfaces,
particularly in non air conditioned spaces.
This is considered normal. The condensation will
evaporate when the humidity drops.
CAUTION
Damages caused by ambient extremes are not
covered by the warranty
SERVICE 115V - 60 Hz - 1 phase
AMPS 15 Amp Circuit Breaker
Requires a Dedicated Outlet
All electrical work must be performed by
a licensed electrician
7
Serious injury, fire or death...
Okay -
o
o
8
right or left
how to change the door opening
Your XO arrives with a right hand hinged door - but it is easily to reverse if you choose.
To reverse the hinge on your unit, follow the directions below:
1.
2. Start screws into these positions as per Fig B, but do not tighten the screws.
3. Remove all screws from both the upper and lower hinge, and then remove the door.
4. Rotate the door 180 degrees, (top to bottom) and place the hinges onto the screws (4) in Fig B.
Slide the slots of the hinge until fully seated against the screws, then tighten the screws to secure
the hinges (Fig D).
5. Place the screw hole covers in the right hand side screw holes as shown in Fig D.
Open the door and remove the screw hole covers (1) on the left hand side as shown in Fig A.
.4egniH .3rooD .2 srevoc eloh wercS.1 Screws
Fig.A
Fig.C
Fig.B
1
2
3
4
4
Fig.D
4
1
9
a perfect fit
your xo is this big ( or small, as the case would be )
height, width & depth
XOU24BCAGO 24” BEVERAGE CENTER
CUSTOM OVERLAY PANELS MAY ADD UP TO 3/4” IN OVERALL DEPTH
YOUR CHOICE OF CABINET HANDLES WILL ALSO ADD DEPTH
90
o
WITH THE DOOR
OPEN AT 90
THE UNIT HAS A
DEPTH OF 46 1/16” (1170mm)
o
23-7/16”
595mm
Minimum
32-1/4”
820mm
Maximum
34-13/16”
885mm
19-15/16”
507mm
21-11/16”
550mm
TOP
VIEW
90°
Door Swing
WALL
Clearance
Gap
INSTALLING NEXT TO
A WALL, ENSURE ADEQUATE
CLEARANCE FOR THE HANDLE
27-15/16”
(710mm)
3-9/16”
(90mm)
3-7/16”
(88mm)
2-3/16”
55mm
3-3/8”
85mm
3-3/8”
85mm
2-3/16”
55mm
a perfect fit
installation under ada counter
rough in dimensions
overlay frame dimensions
10
IF THE DOOR CAN’T OPEN FULLY - YOU CAN’T PULL THE SHELVES OUT.
THE DOOR STOP IS SET AT 110 - BUT CAN BE RESET TO 90 OR 140 IF NEEDED.
o
oo
32 1/2” MIN
(825mm)
ALL XO UNDERCOUNTER
UNITS ARRIVE PRE-WIRED
WITH LOW PROFILE PLUGS
FOR EASY INSTALLATION
NEED MORE SPACE -
CUT INTO AN ADJOINING
CABINET TO REACH AN
OUTLET THERE
7”
(178mm)
4”
(102mm)
24”
(610mm)
WHEN INSTALLING WITH
THE HINGE SIDE NEXT TO A WALL -
LEAVE ADEQUATE SPACE FOR
CABINET HANDLES
DOOR MUST BE ABLE TO OPEN
A MINIMUM OF 90 .
o
90°
Door Swing
WALL
Clearance
Gap
600mm
95mm
65mm
3-3/4”
2-5/8”
23-5/8”
710mm
27-15/16”
minimum
95mm
3-3/4”
20-7/16”
520mm
minimum
18 3/8”
470mm
minimum
To conceal door completely observe
the frame dimensions as minimums.
You can extend panel height but the
gap between the bottom of the door
and the floor must be at least 3” for
ventilation.
To reduce possibility of warping -
overlay frame should be finished on
all sides.
a perfect fit
installation european cabimets
rough in dimensions (720mm door height and 150mm plinth)
overlay frame dimensions
11
IF THE DOOR CAN’T OPEN FULLY - YOU CAN’T PULL THE SHELVES OUT.
THE DOOR STOP IS SET AT 110 - BUT CAN BE RESET TO 90 OR 140 IF NEEDED.
o
oo
34 1/4” MIN
(870mm)
ALL XO UNDERCOUNTER
UNITS ARRIVE PRE-WIRED
WITH LOW PROFILE PLUGS
FOR EASY INSTALLATION
NEED MORE SPACE -
CUT INTO AN ADJOINING
CABINET TO REACH AN
OUTLET THERE
7”
(178mm)
4”
(102mm)
23-5/8”
(600mm)
WHEN INSTALLING WITH
THE HINGE SIDE NEXT TO A WALL -
LEAVE ADEQUATE SPACE FOR
CABINET HANDLES
DOOR MUST BE ABLE TO OPEN
A MINIMUM OF 90 .
o
90°
Door Swing
WALL
Clearance
Gap
590mm
100mm
60mm
3-15/16”
2-3/8”
23-1 /4”
720mm
28-3/8”
minimum
100mm
3-15/16”
20-7/16”
520mm
minimum
18 1/2”
470mm
minimum
To conceal door completely observe
the frame dimensions as minimums.
You can extend panel height but the
gap between the bottom of the door
and the floor must be at least 3” for
ventilation.
To reduce possibility of warping -
overlay frame should be finished on
all sides.
a perfect fit
installation us standard height cabinets
rough in dimensions
overlay frame dimensions
12
IF THE DOOR CAN’T OPEN FULLY - YOU CAN’T PULL THE SHELVES OUT.
THE DOOR STOP IS SET AT 110 - BUT CAN BE RESET TO 90 OR 140 IF NEEDED.
o
oo
34 1/2” MIN
(876mm)
ALL XO UNDERCOUNTER
UNITS ARRIVE PRE-WIRED
WITH LOW PROFILE PLUGS
FOR EASY INSTALLATION
NEED MORE SPACE -
CUT INTO AN ADJOINING
CABINET TO REACH AN
OUTLET THERE
7”
(178mm)
4”
(102mm)
24”
(610mm)
WHEN INSTALLING WITH
THE HINGE SIDE NEXT TO A WALL -
LEAVE ADEQUATE SPACE FOR
CABINET HANDLES
DOOR MUST BE ABLE TO OPEN
A MINIMUM OF 90 .
o
90°
Door Swing
WALL
Clearance
Gap
To conceal door completely observe
the frame dimensions as minimums.
You can extend panel height but the
gap between the bottom of the door
and the floor must be at least 3” for
ventilation.
To reduce possibility of warping -
overlay frame should be finished on
all sides.
600mm
140mm
73mm
5-1/2”
3”
23-5/8”
756mm
minimum
29-3/4”
140mm
5-1/2”
18-3/4”
476mm
*
*
*
Increase panel height by adding
half the increase to both top
and bottom. EX: for a 30” panel,
Increase 5-1/2” to 5-5/8”
FILLER STRIP*
* For US cabinets, use a filler strip to close the gap above
the unit behind the door (an ell bracket is included)
For European cabinets with a 6” toekick, raise the unit by
2” using the leveling legs and install a custom plinth leaving
an open space for ventilation (consult manual)
talking toe kicks
TOE KICKS CAN VARY IN SIZE DEPENDING ON THE STYLE OF CABINETRY. MOST COMMON IN THE
US ARE 3-1/2 INCH TOE KICKS WHICH ARE 3 INCHES DEEP.
EUROPEAN CABINETS ARE SUPPORTED BY ADJUSTABLE LEGS AND TOE KICKS (PLINTHS) RUN THE
WIDTH OF THE CABINETS, CLIPPED TO THE ADJUSTABLE LEGS, TYPICALLY 4 1/2” TO 6” HIGH.
SEE THE ILLUSTRATION BELOW SHOWING SIDE VIEWS OF EACH.
IN A US STANDARD OR ADA INSTALL THE LEVELING LEGS ARE NOT EXTENDED EXCEPT TO HANDLE
IRREGULARITIES IN THE FLOOR.
INCLUDING THE LEVELING LEG, THE BOTTOM OF THE DOOR IS 4 1/8” HIGHER THAN THE FLOOR - SO
THE OVERLAY PANEL HAS BEEN EXTENDED DOWN 5/8” TO MATCH THE CABINET AND SHOW A 3 1/2”
HIGH TOEKICK. THE TOEKICK IS RECESSED MORE THAN 3” (3 7/16”).
IN THE EUROPEAN CABINET INSTALLATION SHOWN RIGHT, THE LEVELING LEGS ARE EXTENDED TO
RAISE THE SILL OF THE CABINET LEVEL WITH THE CABINETRY, WHICH SITS ATOP 6” ADJUSTABLE
LEGS. THIS WILL PERMIT THE INSTALLATION OF A 6” (150mm) PLINTH. ONCE MORE THE OVERLAY
PANEL FRAME HAS BEEN EXTENDED TO ALIGN WITH THE CABINETS.
IMPORTANT: THE VENTILATION OPENINGS LOCATED IN THE TOEKICK MUST NOT BE OBSTRUCTED
IF YOU ARE USING A CUSTOM PLINTH - AN OPEN AREA MUST BE CUT INTO IT TO PROVIDE ADEQUITE
VENTILATION - FAILURE TO DO SO WILL RESULT IN DAMAGE TO THE UNIT.
US STANDARD AND ADA HEIGHT EUROPEAN CABINETRY
XOU “GOA” UNIT
OVERLAY FRAME (3/4”)
CABINET
ADJUSTABLE CABINET LEG
6” HIGH PLINTH (TOEKICK)
MINIMUM OPEN AREA FOR VENTILATION
2 1/4” H x 19 3/8” W | 490mm x 55mm
13
SIDE VIEW
UNDER COUNTER
MAXIMUM PANEL THICKNESS 3/4” (19mm)
PANEL MAXIMUM WEIGHT: 20 lbs.
14
installation under a counter - 4” toe kick
DOOR PANELS MUST BE FINISHED FRONT AND BACK TO PREVENT WARPING.
A
B
C
D
A
B
C
D
OVERLAY PANEL
DOOR
TRIM BLOCK (optional)
TRIM BRACKET (included)
IMPORTANT
Finish panel mounts to door
even with the bottom of cabinets.
Legs are extended only enough
to level unit.
The XOU24 “A ”model is 32 1/4" Tall. The standard US undercounter refrigerator is 34" Tall.
The trim bracket (D) is 1 3/4" Tall and will attach to the top of the refrigerator to fill the void.
If desired you may attach a trim block (C) either to the face of the trim bracket or cabinetry.
15
1. Fully open the door and pull the gasket
out of the gasket channel.
starting at one corner
2. After removing the gasket lay it out on a flat surface to retain its shape.
3. Using clamps to hold it securely in place, position the overlay panel against the door.
4. Using the frame as a guide, drill six (6) pilot holes 1/8” (3mm) in dia. into the finish panel
taking care not to drill through the panel.
5. Using the ST4-30 self-tapping screws provided, fasten the panel to the door frame.
6. Beginning at one corner, re-install the rubber door gasket into the gasket channel.
BEFORE BEGINNING: Attach any handle hardware before mounting the panel to the door frame.
Mounting screw holes are located
in the gasket channel behind the gasket.
SCREW
HOLE
LOCATIONS
S
IMPORTANT NOTE: The back of the panel must be finished to prevent warping and cracking.
16
optional stainless steel door panel kit p/n:
595mm
90mm
60mm
3-9/16”
2-3/8”
23-7/16”
710mm
27-15/16”
Place the handle (B) over the
2 mounting studs (A) on the
door frame with the set screws
(C) pointing down.
Push the handle tightly against
the door and tighten both of the
2 set screws (C) with the hex
key (D)
Keep the hex key in a safe place for future use.
Two extra set screws are included in the hardware bag.
The Stainless Steel door panel comes with both the designer stainless bar handle -
and our PRO Style Handle - you get to choose which style to install
90mm
3-9/16”
The stainless door panel mounts in the same fashion as a wooden cabinet door.
17
foot sliders
2-9/16” 65mm
REAR
FRONT
USING THE FOOT SLIDERS
To compensate for different height cabinetry, your XO has leveling legs that
can extend as much as 2-9/16” (65mm).
When installing your XO with the leveling legs extended, use the FOOT
SLIDERS provided under the feet on each side to help avoid catching and
damaging the legs.
DO NOT NEGLECT THIS IMPORTANT STEP
Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs
are seated firmly on the floor and the interior floor of the unit is level both front to back and
side to side.
Failure to follow this important step may cause problems with proper door operation, excessive
condensation, vibration and noise.
18
it’s like zen - but cooler
get your level out
19
finishing touches
TIE IN BRACKET
TOE KICK | PLINTH
Your XO comes with a
4” (100mm) toe kick | plinth.
It can accommodate up to a
6” (150mm) toe kick | plinth.
If you are not using the vented toe kick that comes with the unit
you must make provision for ventilation by cutting a slot
2-3/16” H x 19-5/16” W (55mm H x 490mm W)
With the door open, using
the screws provided connect
the tie in bracket in the upper
corner of the wine cooler
opposite the hinge -
then screw the flange of the
bracket to the cabinet.
SLOT AREA
20
meet your xo
BEVERAGE CENTER
XOU24BCGOA_
FRONT COOLING VENTS
LEVELING LEGS
CARBON FILTER
CARTRIDGE
(replace every
3 to 6 months)
RECIRCULATION
FAN
GLIDE OUT
GLASS SHELVES
CONTROL PANEL
REVERSIBLE
DOOR
HINGE
REVERSIBLE
DOOR
HINGE
HIDDEN
WHAT’S THAT NOISE...
You new XO is designed for quiet operation but you may hear some sounds your old unit didn’t
make. Because they are new you might be concerned, but they are usually normal. Sounds can
also be amplified by hard surfaces like flooring or tiles. Here is a description of the types of
sounds you might hear and what might be causing them.
may run longer than your old unit. You might also hear a pulsating or high pitched sound as the
compressor and fans adjust to improve performance. During defrosting cycles you may hear some
water running into the drip pan. The refrigerant may sometimes cause a rattling or gurgling sound
as it flows through the system and the you might hear clicking sounds as the unit starts and stops.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
XO XOU24BCGOA User manual
- Type
- User manual
- This manual is also suitable for
XO XOU24BCGOA is a high-quality, innovative, and stylish undercounter beverage center designed for storing and chilling a variety of beverages, including wine, beer, and soda. With its flexible temperature control, you can set the ideal temperature for your drinks, ensuring they are always perfectly chilled and ready to enjoy. The unit's sleek design and compact size make it a great fit for any kitchen, bar, or entertainment area.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
XO U24BCGOA 24 Inch Beverage Center Glass Framed Overlay, Reversible Hinge User manual
-
-
XO XOU24BWDDGO User manual
-
XO XOU24BCGSR User manual
-
-
XO XOU30BWDDGS User manual
-
-
-
-
Other documents
-
Amana ASD2627KES User manual
-
-
Amana Refrigerator ABL192ZFES User manual
-
Summit BIM100ADA Operating instructions
-
Frigidaire FRYB4623AS User manual
-
Krosswood Doors PHED.KA.405V.28.80.134.LH.Clear Installation guide
-
Candy SC-76J/1 User manual
-
Dogberry d-coun-3684-dkch-none-dbhd User manual
-
Frigidaire FFBC4622QS User manual
-
Summit AL54Y User manual