Tenda W311R Product information

Category
Routers
Type
Product information
11N Wireless Broadband Router
1
11N Wireless Broadband Router
2
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names
mentioned herein are the trademarks or registered
trademarks of their respective holders. Copyright of the
whole product as integration, including its accessories
and software, belongs to Shenzhen Tenda Technology Co.,
Ltd. Without the permission of Shenzhen Tenda
Technology Co., Ltd, any individual or party is not allowed
to copy, plagiarize, imitate or translate it into other
languages.
All the photos and product specifications mentioned in
this manual are for references only. As the upgrade of
software and hardware, there will be changes. And if
there are changes, Tenda is not responsible for informing
in advance. If you want to know more about our product
information, please visit our website at www.tenda.cn.
11N Wireless Broadband Router
3
CONTENTS
Chapter 1: Introduction.......................................... 1
1.1 Product Features........................................... 2
1.2 Package Contents ......................................... 4
1.3 LED Indicator and Port Description .................. 4
Chapter 2 Hardware Installation .............................. 7
2.1 How to Install the Router ............................... 7
2.2 Network Application Plan................................ 9
Chapter 3 How to Login to the Router..................... 10
3.1 How to Set the Network Configurations...........10
3.2 Login to the Router ......................................13
Chapter 4: Quick Setup Guide ............................... 15
4.1 Setup Wizard ..............................................15
Chapter 5: Advanced Settings ............................... 21
5.1 LAN Settings...............................................21
5.3 MAC Address Clone ......................................25
5.4 DNS Settings...............................................26
5.5 WAN Media Type..........................................27
Chapter 6: Wireless Setting .................................. 29
6.1 Basic Settings .............................................29
11N Wireless Broadband Router
4
6.2 Wireless Security Setting ..............................32
6.3 Advanced Settings .......................................40
6.4 WPS Settings ..............................................42
6.5 WDS Settings..............................................44
6.6 Wireless Access Control ................................46
6.7 Connection Status........................................47
Chapter 7: DHCP Server....................................... 48
7.1 DHCP Settings.............................................48
7.2 DHCP List and Binding..................................49
Chapter 8 Virtual Server....................................... 50
8.1 Single Port Forwarding..................................50
8.2 Port Range Forwarding..................................52
8.3 ALG Service Settings....................................54
8.4 DMZ Settings ..............................................55
8.5 UPNP Settings .............................................56
Chapter 9 Traffic Control....................................... 57
9.1 Traffic Control..............................................57
9.2 Traffic Statistics...........................................59
Chapter10 URL Monitor ........................................ 60
10.1 URL Monitor ..............................................60
11.1 Client Filter Settings...................................63
11.2 URL Filter Settings......................................64
11N Wireless Broadband Router
5
11.3 MAC Address Filter .....................................66
11.5 Remote Web Management...........................68
11.6 Local Web Management...............................69
11.7 WAN Ping..................................................70
Chapter12 Routing Setting.................................... 71
12.1 Routing Table.............................................71
12.2 Static Routing............................................71
13.1 Time Settings............................................73
13.2 DDNS.......................................................74
13.3 Backup/Restore Settings .............................76
13.4 Restore to Factory Default Setting ................78
13.5 Upgrade Firmware......................................79
13.7 Password Change.......................................80
13.9 Logout......................................................81
Appendix 1Glossary .......................................... 82
Appendix 2: Ask and Question............................... 85
11N Wireless Broadband Router
1
Chapter 1: Introduction
Thank you for purchasing Tenda 11N Wireless
Broadband Router!
W311R utilizes advanced MIMO technology and
increases over 8 times transmission range of ordinary
802.11g products. Compatible with IEEE802.11n (Draft
4.0) and IEEE802.11g/b standards, it can provide up to
150Mbps stable transmission rate. Additionally, it
includes router, wireless access point, four-port switch
and firewall in one, dedicated to SOHOs (Small
Office/Home Office) and family networking.
It supports WDS (Wireless Distribution System)
function for repeating and amplifying the signals to
extend the wireless network coverage. Besides, the
Router also supports all of the latest wireless security
features, such as 64/128-bit WEP, WPA, WPA2,
WPA&WPA and WPS (PBC and PIN) encryption methods,
packet filtering and port forwarding, to prevent
unauthorized access and protect your network against
malicious attack.
In addition, URL and MAC address filtering can take it
easy for parents and network administrator to manage
network life and QoS bandwidth control over specific
11N Wireless Broadband Router
2
computer’s downloading speed is supported as well.
Moreover, UPnP and WMM support can smooth your
MSN voice better, and the included Setup Wizard on
CD-ROM will be easy and fast for non-savvy users to
install the device and access to the Internet.
1.1 Product Features
z Includes router, wireless access point,
four-port switch and firewall in one
z Provides up to 150Mbps uploading and
downloading speed
z Supports two WPS (Wi-Fi Protected Setup)
encryption methods: PBC and PIN
z Compliant to IEEE802.11n, IEEE802.11g,
IEEE802.11b, IEEE802.3 and IEEE802.3u
standards
z Supports over 8 times transmission range of
11G products
z Supports 64/128-bit WEP, WPA, WPA2,
WPA&WPA2 encryption methods
z Supports RTS/CTS protocol and data
partitioning function
z Provides one 10/100Mbps Auto-Negotiation
Ethernet WAN port
z Provides four 10/100Mbps Auto-Negotiation
11N Wireless Broadband Router
3
Ethernet LAN ports
z Supports xDSL/Cable MODEM, static and
dynamic IP in community networking
z Supports remote/local Web management
z Supports WMM to better smooth your voice and
video
z Supports SSID stealth mode and access control
based over MAC address (up to 30 entries)
z Supports Auto MDI/MDIX
z Supports wireless Roaming technology for
high-efficient wireless connections
z Supports auto negotiation/manual mode for
802.11b/802.11g/802.11n
z Supports UPnP and DDNS
z Supports Firefox 1.0, IE5.5 or above
z Supports SNTP
z Supports virtual server, DMZ host
z Built-in firewall for hacker's attack prevention
z Supports DHCP server/client
z Supports auto wireless channel selection
z Supports LAN access control to the Internet
z Provides syslog to record the status of the
router
z Supports WDS wireless network extension
z Supports QoS function
z Built-in two omni-directional antennas
11N Wireless Broadband Router
4
1.2 Package Contents
Please unpack the box and check the following items:
One W311R 11N Wireless Broadband Router
¾ One Quick Installation Guide
¾ One Power Adapter
¾ One CD-ROM
If any of listed items are missing or damaged, please
contact the Tenda reseller from whom you purchased
for replacement immediately.
1.3 LED Indicator and Port Description
Front Panel and LED Indicator Show
LED indicator description on front panel: (from L to R)
¾ POWER
When turns green, Always ON indicates the power
connects well.
11N Wireless Broadband Router
5
¾ SYS
When turns green, blinking indicates the system
runs well.
¾ WPS
When blinking, it indicates the device is negotiating
with client in WPS mode.
¾ WLAN
Wireless signal LED indicator. When turns green,
blinking indicates the wireless function is enabled.
¾ LAN (4,3,2,1)
Wired local network LED indicator. Always ON
indicates it is connected with Ethernet device;
blinking indicates the device is transmitting and/or
receiving data.
¾ WAN
Wide area network indicator. Always ON indicates
the Router’s W.
Back Panel Show
Rear Panel:(From L to R
¾ POWER
The jack is for power adapter connection. Please
11N Wireless Broadband Router
6
use the included 9V DC power adapter.
¾ WAN
A 100Mbps Ethernet port, can be connected with
MODEM, Switch, Router and other Ethernet device
for Internet connecting to DSL MODEM, Cable
MODEM and ISP.
¾ LAN (1, 2, 3, 4)
4 10/100Mbps Ethernet ports can be connected
with Ethernet switch, Ethernet router and NIC card.
¾ RESET
The system reset button. Press this button for 7
seconds, the settings configured in this device will
be deleted and it will restore the settings to the
default one.
¾ WPS
Press it for 1 second, the WPS feature will be
enabled and WPS indicator will be shown blinking.
11N Wireless Broadband Router
7
Chapter 2 Hardware Installation
2.1 How to Install the Router
After you unpack the box, please follow the steps below
to connect. For better wireless performance, please put
the device in the middle of wireless coverage area.
Please use the included power adapter to power on the
Router. IMPORTANT: Use of a different power adapter
could cause damage and void the warranty for this
product.
Please connect the LAN port of the Router to the
network adapter of your computer with a cable.
11N Wireless Broadband Router
8
Please connect your broadband line provided by your
ISP to the WAN port.
Insert the included CD-ROM into the CD-ROM drive,
double click the “Setup” icon and follow the instructions
to complete the installation. Or you can enter the
Router’s Web page to configure it. (More details please
refer to Chapter 3.)
11N Wireless Broadband Router
9
2.2 Network Application Plan
Usually wireless LAN Network is deployed in a planned
environment where each access point is located in a
steady place with certain wireless coverage area for
communication service. Generally speaking, it is in the
center of the area to reduce “dead spot”.
11N Wireless Broadband Router
10
Chapter 3 How to Login to the Router
The chapter mainly presents how to enter the Router’s
Web page. After you have finished the hardware
installation, the following steps will assist you to set the
network configurations for you computer.
3.1 How to Set the Network Configurations
1. On your computer desktop right click “My Network
Places” and select “Properties”.
11N Wireless Broadband Router
11
2. Right click “Local Area Network Connection” and
select “Properties”.
3 Select “Internet Protocol (TCP/IP)” and click
“Properties”.
11N Wireless Broadband Router
12
4 Select “Obtain an IP address automatically” and
“Obtain DNS server address automatically”. Click
“OK” to save the configurations.
Or select “Use the following IP address” and enter the IP
address, Subnet mask, Default gateway as follows:
IP Address: 192.168.0.XXX(XXX is a number from
2~254)
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
Certainly you need to input the DNS server address
provided by your ISP. Otherwise, you can use the
Router’s default gateway as the DNS proxy server. Click
“OK” to save the configurations.
11N Wireless Broadband Router
13
3.2 Login to the Router
1To access the Router’s Web-based interface, launch
a web browser such as Internet Explorer or Firefox
and enter the Router’s default IP address,
http://192.168.0.1. Press “Enter.
11N Wireless Broadband Router
14
2Input the “admin” in both User Name and Password.
Click “OK”.
3. If you enter the correct user name and password, the
screen will be the next one.
11N Wireless Broadband Router
15
Chapter 4: Quick Setup Guide
This chapter deals with how to access the Internet
quickly. Please follow this guide to connect your Router
to the Internet.
4.1 Setup Wizard
Here is the “Welcome to Setup Wizard” for configuring
your Router quickly. Click “Next”.
In this screen, select one mode of your Internet
connection you use. If you are not clear, press the
“Detect” button or contact your Internet Service
Provider, and click “Next”.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93

Tenda W311R Product information

Category
Routers
Type
Product information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI